Jump to content


Photo

[ROM] FusionX Huawei Y300 v1.0 [B199] [Full HWA]


2531 replies to this topic

#521
internectual

internectual

    Newbie

  • Members
  • Pip
  • 29 posts

strange, it works fine for me,
the mass storage option will disappear if you choose mtp, but will reappear after a reboot

did you install with a full wipe and are you on the latest version ?

I've done a full wipe before install, and I've tried installing it several times.

Two problems:

1. Removing the .ISO files from your ROM didn't get rid of the virtual CD drive. I'd rather it not appear at all or work like it used to (with the .ISO mounted so the drivers are accessible, or at the very least replace them with my own .ISO). If I simply move the two .ISO files back to /cdrom and /etc it has no effect, though I didn't try doing it with a flashable .ZIP because /system is the only path in there and I didn't know if it was important to match. I just copied extracted cdrom and etc from the removed.rar and copied them to the SD card and merged them using Root Explorer.

2. The 3G fix linked earlier in the thread breaks USB Mass Storage. It appears to flash a couple of images to some /dev/block files, but I don't know what the "fix" does that would cause other things to break.

Is there something else that needs to be changed to make the virtual CD drive work as before, or at least make the virtual drive disappear? Can you think of what might cause issue #2, and any way to restore 3G?

The virtual drive appears as soon as I plug my phone into the USB cable, but the drive letters don't show up until I choose the option to turn USB Storage on. Previous behavior was they all showed up as soon as the phone was plugged in, didn't prompt me to turn USB Storage on, and both the internal and SD were still accessible to the phone while connected (I didn't ever have to turn USB Storage off).

Edited by internectual, 19 August 2013 - 10:49 AM.

  • 0

#522
@ILE@

@ILE@

    Newbie

  • Members
  • Pip
  • 9 posts
  • Devices:huawei ascend y300
I have problem about vibration alongside phone ringtone. I have selected the option to vibrate when ringing, but when somebody calls me, there is no vibration, only phone ringtone.
Any solution for this?

  • 0

#523
maniv

maniv

    Regular

  • Members
  • PipPip
  • 110 posts
  • Gender:Male
  • Devices:S4 & Huawei P6

no, couldn't get it working


That's a shame, I wonder how they did it for the Lewa ROM for this phone?

Thanks for all your hard work Tillaz.

  • 0

#524
maniv

maniv

    Regular

  • Members
  • PipPip
  • 110 posts
  • Gender:Male
  • Devices:S4 & Huawei P6
Here is a work around to have call recording, I have tested it and it works well.

http://www.modaco.co...call-recording/

  • 0

#525
tillaz

tillaz

    Hardcore

  • Developer Team
  • PipPipPipPipPipPip
  • 5,849 posts
  • Gender:Male
  • Location:R* North
  • Interests:ET Life
  • Devices:Nexus 4
think i have found the true cause of the phone slowing down (its not xposed framework)
performance seems very good now, will be an update in a few days or maybe a week

- improved handling of RAM (no that's does not mean more free, as that's not good)
- improved performance
- improved battery life (fixed the crazy drain when off wifi)

  • 0

#526
tillaz

tillaz

    Hardcore

  • Developer Team
  • PipPipPipPipPipPip
  • 5,849 posts
  • Gender:Male
  • Location:R* North
  • Interests:ET Life
  • Devices:Nexus 4

1. Removing the .ISO files from your ROM didn't get rid of the virtual CD drive. I'd rather it not appear at all or work like it used to (with the .ISO mounted so the drivers are accessible, or at the very least replace them with my own .ISO). If I simply move the two .ISO files back to /cdrom and /etc it has no effect, though I didn't try doing it with a flashable .ZIP because /system is the only path in there and I didn't know if it was important to match. I just copied extracted cdrom and etc from the removed.rar and copied them to the SD card and merged them using Root Explorer.


to be honest i never even noticed that the CD drive is still mounted even though the iso is removed,
but now i do it really does not bother me as when you enable usb mass storage from the notification bar it opens both storage options automatic
and its gone as soon as you disconnect your phone so its no big deal.

i will upload the drivers / cdrom when i get time.



2. The 3G fix linked earlier in the thread breaks USB Mass Storage. It appears to flash a couple of images to some /dev/block files, but I don't know what the "fix" does that would cause other things to break.


what 3G fix?
data works fine on this rom, unless your not using the Y300-0100, then i have no idea as it was not made for other devices.


The virtual drive appears as soon as I plug my phone into the USB cable, but the drive letters don't show up until I choose the option to turn USB Storage on. Previous behavior was they all showed up as soon as the phone was plugged in, didn't prompt me to turn USB Storage on, and both the internal and SD were still accessible to the phone while connected (I didn't ever have to turn USB Storage off).


like I've said before, this is normal / the way its supposed to be on stock android (AOSP)
previous behaviour is huawei's customisations, and the idea of this rom is to remove all of that and use AOSP,
you will want to use a more stock huawei based rom if you want that stuff.

note:

if you want storage options to be available as soon as you plug in the phone (on AOSP)
you need to select "connected as installer" then choose MTP connection, then when you plug in your device you will have
something like this, which has the storage options inside.

Attached File  Untitled.png   5.59KB   30 downloads

  • 0

#527
kmau

kmau

    Newbie

  • Members
  • Pip
  • 39 posts
  • Gender:Male
  • Location:Italy
  • Devices:Huawei Y300-0100

think i have found the true cause of the phone slowing down (its not xposed framework)
performance seems very good now, will be an update in a few days or maybe a week

- improved handling of RAM (no that's does not mean more free, as that's not good)
- improved performance
- improved battery life (fixed the crazy drain when off wifi)


So you continue to develop this ROM? I have lost a few step ...
:)

  • 0

#528
internectual

internectual

    Newbie

  • Members
  • Pip
  • 29 posts

what 3G fix?
data works fine on this rom, unless your not using the Y300-0100, then i have no idea as it was not made for other devices.

The one mentioned here. It's a batch file with adb commands to flash two .img files to /dev/block (and a new recovery) which works to restore missing support for 3G on the Y300-0151, but breaks USB Mass Storage under your ROM (and presumably the "NORMAL" firmware on Huawei's website for the Y300-0100).

like I've said before, this is normal / the way its supposed to be on stock android (AOSP)
previous behaviour is huawei's customisations, and the idea of this rom is to remove all of that and use AOSP,
you will want to use a more stock huawei based rom if you want that stuff.

note:

if you want storage options to be available as soon as you plug in the phone (on AOSP)
you need to select "connected as installer" then choose MTP connection, then when you plug in your device you will have
something like this, which has the storage options inside.

Attached File  Untitled.png   5.59KB   30 downloads

That gives me access to the internal and SD card, but when I tried copying a .ZIP it never appeared. I suspected this was a limitation of using a connection type designated for media players, as I've had similar issues with MP3 players using MTP. If I can't copy any filetype to my phone without going through hoops it isn't useful. That's why I prefer drive letters and no restrictions on what I can copy.

  • 0

#529
tillaz

tillaz

    Hardcore

  • Developer Team
  • PipPipPipPipPipPip
  • 5,849 posts
  • Gender:Male
  • Location:R* North
  • Interests:ET Life
  • Devices:Nexus 4

That gives me access to the internal and SD card, but when I tried copying a .ZIP it never appeared. I suspected this was a limitation of using a connection type designated for media players, as I've had similar issues with MP3 players using MTP. If I can't copy any filetype to my phone without going through hoops it isn't useful. That's why I prefer drive letters and no restrictions on what I can copy.


MTP connection works for copying any files, including .zip.. i know this for sure because MTP is the only option the nexus 4 has, so i have to use it regularly.
it operates the same in the huawei stock rom and this rom as i have personally used it before.

if you do not like MTP connection use mass storage, this gives the drive letters, and works much better, this needs enabled when you want to use it from the notification area and turned off from the same place when finished like the most android phones.

I'm guessing you are new to android or you would already know that's the normal way mass storage is handled, and its huawei's stock rom that's different.
understandable if EmotionUI was your first look at android ;)

  • 0

#530
hele16

hele16

    Newbie

  • Members
  • Pip
  • 1 posts
  • Devices:Huawei Ascend Y300
Hi, I have a Huawei Y300-0100 Czech Republic. Handsfree is connected, but the sound is heard from the phone. During the call, off and on hadsfree and everything is fine. Every time I call, repeat this procedure. You do not know how to solve this problem? Thank you.

  • 0

#531
ZolaIII

ZolaIII

    Addict

  • Members
  • PipPipPipPipPip
  • 749 posts
  • Devices:Huawei Y300-100
Just to let everyone on the costume roms know that the official firmware upgrade is just rolled out over the OTA! It's a 194B (87,16 Mb) containing the Viber fix & Google patches for the system!
It's for Y300 & base it's 178B...
Attached File  Screenshot_2013-08-20-00-58-13.png   74.2KB   67 downloads
This is most frequent trade, i will delete this in a couple of days.

Edited by ZolaIII, 19 August 2013 - 11:09 PM.

  • 0

#532
tillaz

tillaz

    Hardcore

  • Developer Team
  • PipPipPipPipPipPip
  • 5,849 posts
  • Gender:Male
  • Location:R* North
  • Interests:ET Life
  • Devices:Nexus 4

Just to let everyone on the costume roms know that the official firmware upgrade is just rolled out over the OTA! It's a 194B (84,16 Mb) containing the Viber fix & Google patches for the system!

This is most frequent trade, i will delete this in a couple of days.


cool,

has anyone uploaded the update package yet? judging by the size its just a patch. would be appreciated if someone could upload it :)

  • 0

#533
Clarkiieh

Clarkiieh

    Enthusiast

  • Members
  • PipPipPip
  • 209 posts
  • Devices:Huawei Ascend Y300

Just to let everyone on the costume roms know that the official firmware upgrade is just rolled out over the OTA! It's a 194B (84,16 Mb) containing the Viber fix & Google patches for the system!

This is most frequent trade, i will delete this in a couple of days.


This for stock ROM as well?

  • 0

#534
ZolaIII

ZolaIII

    Addict

  • Members
  • PipPipPipPipPip
  • 749 posts
  • Devices:Huawei Y300-100

This for stock ROM as well?

It's for Y300 international!
If there is no any for G510 in next couple of days then there is sense in uploading this so the guys like "Tilaz" can integrate it manually in they buils!
On the other hand Kral or someone else could make various (scripted) flash able zips so it's available for everybody on stock or stock based.
To be honest i don't know is there any difference between this & 190B except naturally this one is intended for international version of Y300...

  • 0

#535
tillaz

tillaz

    Hardcore

  • Developer Team
  • PipPipPipPipPipPip
  • 5,849 posts
  • Gender:Male
  • Location:R* North
  • Interests:ET Life
  • Devices:Nexus 4

It's for Y300 international!
If there is no any for G510 in next couple of days then there is sense in uploading this so the guys like "Tilaz" can integrate it manually in they buils!
On the other hand Kral or someone else could make various (scripted) flash able zips so it's available for everybody on stock or stock based.
To be honest i don't know is there any difference between this & 190B except naturally this one is intended for international version of Y300...


if someone sends me the package (update.app) i will make a flashable .zip for all roms ;)

  • 0

#536
Laximus

Laximus

    Enthusiast

  • Members
  • PipPipPip
  • 184 posts
  • Gender:Male
  • Location:Hungary/Budapest
  • Devices:Y300-0100

It's for Y300 international!
If there is no any for G510 in next couple of days then there is sense in uploading this so the guys like "Tilaz" can integrate it manually in they buils!
On the other hand Kral or someone else could make various (scripted) flash able zips so it's available for everybody on stock or stock based.
To be honest i don't know is there any difference between this & 190B except naturally this one is intended for international version of Y300...


thanks

but where did you find it?

my phone doesnt shows any update, and also no update on the official site

http://consumer.huaw...ads/y300-en.htm

  • 0

#537
Ducsidu

Ducsidu

    Enthusiast

  • Members
  • PipPipPip
  • 264 posts
  • Gender:Male
  • Location:Hungary
  • Devices:Huawei Ascend Y300-0100

So you continue to develop this ROM? I have lost a few step ...
:)


Tillaz, please answer this

  • 0

#538
internectual

internectual

    Newbie

  • Members
  • Pip
  • 29 posts

I'm guessing you are new to android or you would already know that's the normal way mass storage is handled, and its huawei's stock rom that's different.
understandable if EmotionUI was your first look at android ;)

This is just my first Android 4.x phone, which is when they made MTP standard. Before that I had a Motorola i1 running 1.5 and a Samsung Prevail running 2.3, so it's not my first time at the rodeo. If Huaewei ever gets around to posting the right firmware for the Y300-0151 I'll probably go back to stock and just "roll my own" as you have by stripping out the bloat and replacing apps with ones of my choosing. I don't really have an issue with EmotionUI. I liked that the version that originally came with my phone supported "inserting" app icons in front or behind others, and dragging icons across pages. With stock UI or the old EmotionUI that's part of B172 you have to manually move every icon after where you want the new icon to go. It was a minor inconvenience that it had no app drawer, but I just placed mostly unused apps on the last page and ignored them. I could have put them in folders instead.

  • 0

#539
ZolaIII

ZolaIII

    Addict

  • Members
  • PipPipPipPipPip
  • 749 posts
  • Devices:Huawei Y300-100
Well tray this one cawboy! It works like charm!
http://www.mobilesms...cher-v2-0-5_812

Nice to know that we have and good old boys around hire!

Emotion UI is a death end thing because you can't even hide the icons & over the time they accumulate eating ram & so on.

  • 0

#540
tillaz

tillaz

    Hardcore

  • Developer Team
  • PipPipPipPipPipPip
  • 5,849 posts
  • Gender:Male
  • Location:R* North
  • Interests:ET Life
  • Devices:Nexus 4

This is just my first Android 4.x phone, which is when they made MTP standard. Before that I had a Motorola i1 running 1.5 and a Samsung Prevail running 2.3, so it's not my first time at the rodeo. If Huaewei ever gets around to posting the right firmware for the Y300-0151 I'll probably go back to stock and just "roll my own" as you have by stripping out the bloat and replacing apps with ones of my choosing. I don't really have an issue with EmotionUI. I liked that the version that originally came with my phone supported "inserting" app icons in front or behind others, and dragging icons across pages. With stock UI or the old EmotionUI that's part of B172 you have to manually move every icon after where you want the new icon to go. It was a minor inconvenience that it had no app drawer, but I just placed mostly unused apps on the last page and ignored them. I could have put them in folders instead.


yeah, i was talking about the USB mass storage option, which has been there since i can remember (android 2.2)
i would never use MTP if USB mass storage is available.

also if you like the EmotionUI launcher you could have a look at MiHome Launcher its similar and available on the market
https://play.google....i.mihome2&hl=en

  • 0




3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users