Jump to content

[KK] [4.4.4] CyanogenMod 11.0 [ROM] [ALL] [WEEKLY BUILDS ON FRIDAY]


Recommended Posts

Guest chobot1976
Posted

Y300: This is logcat after i made this

 

Now have Beam working on latest slimkat build. 

 

Copied libpn544_fw.so to /system/vendor/firmware/ 

Copied EEDATA.cfg to /data/misc/nfc/ AND /data/nfc/

Coppied android.hardware.nfc.hce.xml from /system/etc/etc/permissions/ to /system/etc/permissions/

ALSO set permissions in /data/misc/nfc AND /data/nfc to drwxr-xr-x

(don't forget to set file permissions the same as original, some like ESfile explorer seem to do it for you now)

 

Can someone please check (who has 2 nfc phones or devices) please check this just to make sure i haven't fluked it?

 
still tag not works  :(

nfc4.txt

Guest Y300-0100
Posted

only in system/etc?

yes

and this etc/etc was my double paste

/system/etc/etc/permissions/ to /system/etc/permissions/
Guest chobot1976
Posted (edited)

tag not works. the new file is smaller then old one. Is it right?

Here is logcat.

nfc5.txt

Edited by chobot1976
Guest chobot1976
Posted (edited)

Y300: btw: I must create this folders /system/vendor/FIRMWARE /data/misc/NFC and /data/NFC

All the folders that I are create have permissions rwxr-xr-x

Edited by chobot1976
Guest kenryk
Posted (edited)

Here you can find chil360's 0.51 kernel repacked for CM11 ( I simply followed the instructions provided here). All credits go to chil360.

 

edit: zip also containing the new EGL libs can be found here,

post-992501-0-38136100-1412411431_thumb.

Edited by kenryk
Guest xSergioHp.
Posted

We have already included the new drivers / libs in this CM11 ?

Guest kenryk
Posted

We have already included the new drivers / libs in this CM11 ?

 

Not yet, but I hope Daz will add them soon; as far as I can tell, CM11 runs much smoother with the new libs.

Guest xSergioHp.
Posted

Not yet, but I hope Daz will add them soon; as far as I can tell, CM11 runs much smoother with the new libs.

In much Mr. Daz implement the libs, I'm going to flash this Rom, that I'm looking forward to : D

Guest kenryk
Posted

In much Mr. Daz implement the libs, I'm going to flash this Rom, that I'm looking forward to : D

 

You can flash the second zip I posted above, it contains Chil360's v0.51 kernel as well as the new libs.

Guest xSergioHp.
Posted

You can flash the second zip I posted above, it contains Chil360's v0.51 kernel as well as the new libs.

 

Ok thanks, I'll try it anyway

Guest neobisbg
Posted

When it fixed the problem with VoIP, please?? is very important to make calls or video calls , this is the only error that you encounter to the KitKat  :( 

Guest Krisoboe
Posted

Last cm11 days 02 03 04 give me error sistem.ui :(

Guest wbrambley
Posted

You can flash the second zip I posted above, it contains Chil360's v0.51 kernel as well as the new libs.

Hi have just tried that second zip in my wife's phone. Link2sd failed to mount/link second partition until i reflashed the original cm11 kernel.

since going back all working good.

Guest kenryk
Posted (edited)

Hi have just tried that second zip in my wife's phone. Link2sd failed to mount/link second partition until i reflashed the original cm11 kernel.

since going back all working good.

 

It looks like Chil360's kernel has some issues with ext4 partitions. One solution would be to reformat the second partition with AParted, I've just tried it using the ext4 fs (edit: even though I selected ext4, it created an ext3 partition) and can verify that it works. (I found this solution in the SlimKat thread)

However, this translates to losing all the data on your second partition, so be sure to backup all the apps installed there.

Edited by kenryk
Guest wbrambley
Posted

It looks like Chil360's kernel has some issues with ext4 partitions. One solution would be to reformat the second partition with AParted, I've just tried it using the ext4 fs (edit: even though I selected ext4, it created an ext3 partition) and can verify that it works. (I found this solution in the SlimKat thread)

However, this translates to losing all the data on your second partition, so be sure to backup all the apps installed there.

That was my wife's phone, I am using SlimKat on my G510 without any problem. Have a 2Gb sd-ext partion (ext4) + 512mb swap.
Guest felipovicc
Posted

Hey any plan on including new gpu drivers on this one? Would be great! Thanks!

Guest chobot1976
Posted

Y300: What is your patch for today's nightly?

Guest Trapezio
Posted (edited)

The OTG's protocol is supported in the last release?

Edited by Trapezio
Guest Y300-0100
Posted

The OTG's protocol is supported in the last release?

No.
Guest Y300-0100
Posted

Y300: What is your patch for today's nightly?

Tag fix + attempt of otg fix. But still in testing.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.