Guest tacchan23 Posted October 21, 2009 Report Share Posted October 21, 2009 the GPS part, set baud rate at 38400, garmin got locked on in 30 sec. 30seconds for first fix after installing Garmin? also after soft reset? I'll try the 38400 baud rate later today when I go out :) Link to comment Share on other sites More sharing options...
Guest superdarkyaya Posted October 21, 2009 Report Share Posted October 21, 2009 You mean you want to Enable/Disable HSDPA? If so, there is option in Samsung Setting - Network Settings - HSDPA/HSUPA Yes i know that my friend !! No, i just want my hsdpa connection is cuting AUTOMATICLY after, for exemple, 1 minute, or 2 minutes. With my Omnia i900, my tweak worked so nice but not with the O 2........... I test another tweaks and i will rreport it here if i found ok !!! (sorry for my poor english All !!) Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 21, 2009 Report Share Posted October 21, 2009 Yes i know that my friend !! No, i just want my hsdpa connection is cuting AUTOMATICLY after, for exemple, 1 minute, or 2 minutes. With my Omnia i900, my tweak worked so nice but not with the O 2........... I test another tweaks and i will rreport it here if i found ok !!! (sorry for my poor english All !!) You want to close your HSDPA connection to go back to Edge? if so, maybe you could check this application here: http://forum.xda-developers.com/showthread.php?t=478519 (never tried it really, saved the link just in case for future uses^^) Link to comment Share on other sites More sharing options...
Guest superdarkyaya Posted October 21, 2009 Report Share Posted October 21, 2009 (edited) You want to close your HSDPA connection to go back to Edge? if so, maybe you could check this application here: http://forum.xda-developers.com/showthread.php?t=478519 (never tried it really, saved the link just in case for future uses^^) I answer myself !!!!!!! My first tweak (post #14) is oki !! Wonderful !! :) If you want tacchan23, you can add it in your topic !!! :( The hsdpa is cutting automaticly after 1mn without activity (if you change the CacheTime to 60 )........ Fantastic fot exemple when you update your meteo by hsdpa or gprs.. Opera is cutting automaticly when you quit it !!! Nice for the battery !! Enjoy All folks !! Edited October 21, 2009 by superdarkyaya Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 21, 2009 Report Share Posted October 21, 2009 I answer myself !!!!!!! My first tweak (post #14) is oki !! Wonderful !! :) If you want tacchan23, you can add it in your topic !!! :( The hsdpa is cutting automaticly after 1mn without activity (if you change the CacheTime to 60 )........ Fantastic fot exemple when you update your meteo by hsdpa or gprs.. Opera is cutting automaticly when you quit it !!! Nice for the battery !! Enjoy All folks !! Sorry, not really sure what you mean^^ What you wanted to do is to disable the data connection (be it Edge or 3g) after xx minutes of inactivity? if so: Samsung Settings - General Settings - Wireless Manager - Menu - Data con. Settings - No packet for Or you wanted to disable just HSDPA and go to Edge? if so, is this what your reg tweak does? Link to comment Share on other sites More sharing options...
Guest superdarkyaya Posted October 21, 2009 Report Share Posted October 21, 2009 (edited) Sorry, not really sure what you mean^^ What you wanted to do is to disable the data connection (be it Edge or 3g) after xx minutes of inactivity? if so: Samsung Settings - General Settings - Wireless Manager - Menu - Data con. Settings - No packet for Or you wanted to disable just HSDPA and go to Edge? if so, is this what your reg tweak does? Yes you're right !! But my solution is automatic !!! For geeks without brain and without fingers !! Lol ! xD !! Test my tweak and so, you will understand.......Put the Dword value to 60 :) This is an automatic data disconnection.............. Edited October 21, 2009 by superdarkyaya Link to comment Share on other sites More sharing options...
Guest Lancez Posted October 21, 2009 Report Share Posted October 21, 2009 30seconds for first fix after installing Garmin? also after soft reset? I'll try the 38400 baud rate later today when I go out :) yes, on cold start. google map and garmin xt. Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 22, 2009 Report Share Posted October 22, 2009 yes, on cold start. google map and garmin xt. I tried it yesterday but couldn't get a fix in 7minutes... will try again today:) I wonder why there are so many different reports about gps°_° Link to comment Share on other sites More sharing options...
Guest Lancez Posted October 22, 2009 Report Share Posted October 22, 2009 I tried it yesterday but couldn't get a fix in 7minutes... will try again today:) I wonder why there are so many different reports about gps°_° did u get xtra downloaded first? Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 22, 2009 Report Share Posted October 22, 2009 did u get xtra downloaded first? yes, i'll try again today. @all: see u on sunday when i come back from short trip^^ Link to comment Share on other sites More sharing options...
Guest Lancez Posted October 22, 2009 Report Share Posted October 22, 2009 yes, i'll try again today. @all: see u on sunday when i come back from short trip^^ enjoy Link to comment Share on other sites More sharing options...
Guest mightymouse1045 Posted October 22, 2009 Report Share Posted October 22, 2009 (edited) sorry didn't know how to delete a post Edited October 22, 2009 by mightymouse1045 Link to comment Share on other sites More sharing options...
Guest mightymouse1045 Posted October 22, 2009 Report Share Posted October 22, 2009 (edited) Small guide/memo on what to do after Flashing a new ROM (this is just a small list I made for myself to make it easier to remember what to do/install every time, so of course it refers to my most used programs and settings but maybe the general layout could be usefull to someone else too):) Hi Tacchan23 (Your a legend!!!), Comments suggestions (updated): * The hard reset - everywhere i see it, everyone says just that "do a hard reset". Maybe link to your instructions or something so people don't think it means only turning the phone off... * I noticed in your previous thread you said you combine spb mobile shell with iPhoneToday but it is not listed. You installing that or you just leave it with spb mobile shell now? If not any reason why before i go and install iPhoneToday? * The startup time for spb mobile shell is shocking. I timed it and from when i see the windows mobile today screen (and can use the phone), it takes another 20 to 30 seconds to load spb mobile shell - any way to speed this up at all? P.S. You should setup a donation link like those other forums if possible coz this is good work man, I am sure people wouldn't mind slipping some money your way for your efforts :P Edited October 22, 2009 by mightymouse1045 Link to comment Share on other sites More sharing options...
Guest Tylwith Posted October 22, 2009 Report Share Posted October 22, 2009 I will make a cab when i come home it was on my todo list anyway Sorry was to tired yesterday finish to worked at 11pm so i made the cab to remove the stratup shutdown sounds of the O2 Link to comment Share on other sites More sharing options...
Guest superdarkyaya Posted October 22, 2009 Report Share Posted October 22, 2009 (edited) Sorry was to tired yesterday finish to worked at 11pm so i made the cab to remove the stratup shutdown sounds of the O2 my friend, try this cab :) it was made for my omnia i900 but it work on the O2 !! (install in "my device" of course !!) No_Sutdown___.cab Enjoy ! Edited October 22, 2009 by superdarkyaya Link to comment Share on other sites More sharing options...
Guest Rothariger Posted October 23, 2009 Report Share Posted October 23, 2009 is there any new fix for watching videos in a tv with subs? thanks! Link to comment Share on other sites More sharing options...
Guest chteh0721 Posted October 23, 2009 Report Share Posted October 23, 2009 Cabs for easy and fast Registry Tweaking In this thread you can find Cabs (made by Tylwith) that will make applying some of the Registry Tweaks posted above a lot more easy and fast. Below a short description: DisableCameraSound.cab Disable autofocus sound, recording sound and SHUTTER3 Enable_Settings_rotation.cab Enables the settings menu in 6.5 rom and also allow to map the rotation to a hard key EnableDialerSkin.cab Enable Samsung Dialer DisableDialerSkin.cab Disable Samsung Dialer EnchancedTouch.cab Encrese the screen responsiveness RingIncrease.cab Fix the 3 second ring delay (it only works up to firmware H3, after that it just mutes the phone) DisableSkinSmsEmail.cab Disable Samsung Skinned Email and Sms application EnableThreadedSms.cab It only works after using disableSkinSmSEmail.cab 4RowsMenuWithHoneyComb.cab Make 4 rows for windows 6.5 start up menu with honeycomb SettingMenu.cab Add 6.1 menusettings for people who want to enable/disable touchwizUI on wm6.5 the enhanced touch.cab file is missing. can you upload it again? Link to comment Share on other sites More sharing options...
Guest Tylwith Posted October 23, 2009 Report Share Posted October 23, 2009 the enhanced touch.cab file is missing. can you upload it again? Go look in the initial cab thread ... the link is with the cab link Link to comment Share on other sites More sharing options...
Guest IceSpec Posted October 23, 2009 Report Share Posted October 23, 2009 Just Flash to WM6.5. I realise that song at My Ringtones will not reflect on Ring Tone List.. Anyone know how to change my Ringtone and SMS alert to custom RingTone?? Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 23, 2009 Report Share Posted October 23, 2009 Just Flash to WM6.5. I realise that song at My Ringtones will not reflect on Ring Tone List.. Anyone know how to change my Ringtone and SMS alert to custom RingTone?? You can put them in My Storage Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 23, 2009 Report Share Posted October 23, 2009 is there any new fix for watching videos in a tv with subs? thanks! Not that I know... sadly .smi subs doesn't display on TV :D and any other movie player with subtitles have really bad performance :P Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 23, 2009 Report Share Posted October 23, 2009 enjoy Got back home earlier... luckly becouse it was some really sh***y kind of trip^^ The gps today was working not so good... it's really random. Also with BaudRate: 38400 wasn't working at all for me... maybe it depends on which BaudRate is used on the first fix after a soft reset? no idea really^^ Link to comment Share on other sites More sharing options...
Guest awarner (MVP) Posted October 23, 2009 Report Share Posted October 23, 2009 Is there a reg setting for disabling the AGPS and just use the good old GPS for geotagging photos? Don't really want to use any data up just to tag and pictures I take. Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 23, 2009 Report Share Posted October 23, 2009 Is there a reg setting for disabling the AGPS and just use the good old GPS for geotagging photos? Don't really want to use any data up just to tag and pictures I take. Sorry I'm not very expert about GPS... not even sure if AGPS and XTRA is the same thing or not^^ You can disable the XTRA download or make it manually or only on Active Sync at Samsung Settings - General Settings - GPS - XTRA Sorry if it's not what you were looking for^^ Link to comment Share on other sites More sharing options...
Guest tacchan23 Posted October 23, 2009 Report Share Posted October 23, 2009 Comments suggestions (updated): * The hard reset - everywhere i see it, everyone says just that "do a hard reset". Maybe link to your instructions or something so people don't think it means only turning the phone off... * I noticed in your previous thread you said you combine spb mobile shell with iPhoneToday but it is not listed. You installing that or you just leave it with spb mobile shell now? If not any reason why before i go and install iPhoneToday? * The startup time for spb mobile shell is shocking. I timed it and from when i see the windows mobile today screen (and can use the phone), it takes another 20 to 30 seconds to load spb mobile shell - any way to speed this up at all? P.S. You should setup a donation link like those other forums if possible coz this is good work man, I am sure people wouldn't mind slipping some money your way for your efforts :D I'll put tha Hard Reset in the FAQ list At the moment I'm not using iPhoneToday anymore becouse I'm still waiting for many UI to test^^ SPB mobile shell 3.5 now allows to use custom icons too and I hope the new PointSense version will be availble too. Also with the many ROMs available lately I flash too often^^ Anyway I'll make a section where to talk about my favorite UI and screens. About faster startup for SPB I don't know sorry... I soft reset my phone just once every many days so I never paid much attention to it Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now