Jump to content

Using NPS to upgrade to 6.5 or how to downgrade to official ih5 after flashing Secany Roms


Guest Tylwith
 Share

Recommended Posts

sad to say, it's not working.. :D

reinstall NPS and change country to singapore. I have no luck.

maybe i just used K5 from secany..

thanks for your reply..

did you try to downgrade to hi3 ? normally you should use hi3 xsoh1 dxih2

Edited by Tylwith
Link to comment
Share on other sites

did you try to downgrade to hi3 ? normally you should use hi3 xsoh1 dxih2

sorry for my bad english in my previous post..

flashing from ih5 to ih3 now. lets see if it's working. this is my last option.

if it's still the same. i better flash it to k5..

Link to comment
Share on other sites

sorry for my bad english in my previous post..

flashing from ih5 to ih3 now. lets see if it's working. this is my last option.

if it's still the same. i better flash it to k5..

Mine from XXIH3, XSOIH1, DXIH2 NPS flashed to XXIH5, XSOIH1, DXIH2.

Thereafter indicate the version is the latest no update require.

Why?

Thought it was suppose to update to WM6.5 with J version?

Anyone care to comment and adv.

Thks

Link to comment
Share on other sites

Mine from XXIH3, XSOIH1, DXIH2 NPS flashed to XXIH5, XSOIH1, DXIH2.

Thereafter indicate the version is the latest no update require.

Why?

Thought it was suppose to update to WM6.5 with J version?

Anyone care to comment and adv.

Thks

s***! There are at least 3 version of NPS.

Just downloaded the 1.4.0Ik1 version from http://www.samsungmobile.com.sg/support/so...eOtherUpdate.do

Got to uninstall the older version before installing this version.

The rest is as usual.

Now inprocess of updating to WM6.5 J version.

Link to comment
Share on other sites

s***! There are at least 3 version of NPS.

Just downloaded the 1.4.0Ik1 version from http://www.samsungmobile.com.sg/support/so...eOtherUpdate.do

Got to uninstall the older version before installing this version.

The rest is as usual.

Now inprocess of updating to WM6.5 J version.

update completed.

Device update information

- Model name: GT-I8000

- Service name: Software update

- Service version: I8000NXXIJ9/I8000XSOIJ2/I8000DXIJ1/I8000XSOIJ2

Phew!!!!

Will now flash to K5 but retain official CSC at I8000XSOIJ2.

Link to comment
Share on other sites

Will tryed everything ,downgrade everything didnt work for my I8000 . I think the NPS also check the imei or some kind of identification, if your phone is an original singapore I8000 flashed to other roms, it might work ! but not for other region i8000 ,not mine for sure

Link to comment
Share on other sites

Will tryed everything ,downgrade everything didnt work for my I8000 . I think the NPS also check the imei or some kind of identification, if your phone is an original singapore I8000 flashed to other roms, it might work ! but not for other region i8000 ,not mine for sure

Cannot remember who wrote this (ps. credit to the author)

Got to do it before official flash.

And make sure the NPS is 1.4.0IK

Another step you need to do since you already flash your CSC's, you need to re-preconfigure your phone for the location.

Here how:

1 ) On your keypad input *#1546792*#

2 ) Select [Preconfiguration]

3 ) Enter code *#81230*# and select [OK]

4 ) Select [What ever your location]

5 ) Choose accept for device to Hard-Reset

6 ) Flash to the official ROM.

Link to comment
Share on other sites

Mine from XXIH3, XSOIH1, DXIH2 NPS flashed to XXIH5, XSOIH1, DXIH2.

Thereafter indicate the version is the latest no update require.

Why?

Thought it was suppose to update to WM6.5 with J version?

Anyone care to comment and adv.

Thks

may i know which version of nps you were using for this upgrade ? want to check if it flashes the csc again.

Link to comment
Share on other sites

Cannot remember who wrote this (ps. credit to the author)

Got to do it before official flash.

And make sure the NPS is 1.4.0IK

Another step you need to do since you already flash your CSC's, you need to re-preconfigure your phone for the location.

Here how:

1 ) On your keypad input *#1546792*#

2 ) Select [Preconfiguration]

3 ) Enter code *#81230*# and select [OK]

4 ) Select [What ever your location]

5 ) Choose accept for device to Hard-Reset

6 ) Flash to the official ROM.

It's not the csc or the region. My phone is a I8000L ,so I think this trick only works for Singapore market phones. After flashing xso1 the Preconfiguration is Singapore, I changed to my location Canada, both didn't work. NPS is IK1, I am trying to install XPsp2 to see that make any diffirence.lol ,My phone come with a 6.5 pre-installed,this is first time having a 6.1, I will keep it for another day before flash back to 6.5. Thanks anyway.

Link to comment
Share on other sites

after some issue encountered by some of us. I wanted to check if it was possible to go back to an official 6.1 rom and having the original csc back.

i tried and it worked.

I know that some of us prefer 6.1 so with that way we can go back to an official 6.1 rom.

See my fisrt post.

Tylwith

Link to comment
Share on other sites

Hi everyone,

i read that a lot of people wanted to do an official update using new pc studio k1 version( i was one of the people) after using secany or zorg firmware.

So i decided to give it a try.

Basicly nps detects which country you o2 is from using the csc file.

Problem the i8000xsoih1.csc can not be found.(For singapore)

So i decided to create a FAKE ONE based on famih4

and i was successful.

So i downgraded to i8000XXIH3 using zorg version

And phone dxih2

and using my fake csc.

So ihad

PDA: I8000XXIH3

CSC: I8000XSOIH1

PHONE: I8000DXIH2

and when i connected my phone to new pc studio i was prompt for the upgrade.

If you install NEW PC STUDIO VERSION H2_H5 instead of k1

http://org.downloadcenter.samsung.com/down...1.2.1.IH2_5.exe

NPS will update you to official H5 and it will overwrite my fake csc with the original one

PDA: I8000XXIH5

CSC: I8000XSOIH1

PHONE: I8000DXIH2

iI have attached my fake csc file.

As usual i am not responsible for any damage,brick, loss of data that can occur .

Tylwith

Thanks to you!

I made it from I8000XXIH5 to j9. Although the wm6.5 rom works not as good as expected,it is the official rom now. Looking forward to the next update.

Link to comment
Share on other sites

Under which windows os you guys install NPS & upgrade phone? Thanks>>>>> After so much effort of knowing that needing to downgrade Eboot to 6.1 before able to install PHONE: I8000DXIH2 & now I am stuck again.

Edited by jazzz0904
Link to comment
Share on other sites

Under which windows os you guys install NPS & upgrade phone? Thanks>>>>> After so much effort of knowing that needing to downgrade Eboot to 6.1 before able to install PHONE: I8000DXIH2 & now I am stuck again.

i did the testing under xp and vista 32 bit

you must intall ih3 or ih5 rom my csc and dxih2

Link to comment
Share on other sites

Didn't work here...

Got the phone to:

PDA: I8000XXIH3

CSC: I8000XSOIH1

PHONE: I8000DXIH2

And tried with both versions using Singapore:

New_PC_Studio_1.2.1.IH2_5.exe

New_PC_Studio_1.4.0.IK1.exe

Both says Device not supported.

I´m worried about this: on NPS the phone appears as:

GT-I8000 (000-0000-0000)

Are this zeros normal ? What is supposed to be there ? S/N ? IMEI ? Should I be worried ?

On the device *#06# show me the correct IMEI. How do I check the S/N on the phone (on software) ?

Link to comment
Share on other sites

Didn't work here...

Got the phone to:

PDA: I8000XXIH3

CSC: I8000XSOIH1

PHONE: I8000DXIH2

And tried with both versions using Singapore:

New_PC_Studio_1.2.1.IH2_5.exe

New_PC_Studio_1.4.0.IK1.exe

Both says Device not supported.

I´m worried about this: on NPS the phone appears as:

GT-I8000 (000-0000-0000)

Are this zeros normal ? What is supposed to be there ? S/N ? IMEI ? Should I be worried ?

On the device *#06# show me the correct IMEI. How do I check the S/N on the phone (on software) ?

Update:

Got it updated using NPS!

I had it update to H5 first:

PDA: I8000XXIH5

CSC: I8000XSOIH1

PHONE: I8000DXIH2

This were the exact versions on the device when I bought it.

Only then NPS (1.4.0.IK1) recognized it as upgradable and updated to :

PDA: I8000NXXIJ9

CSC: I8000XSOIJ2

PHONE: I8000DXIJ1

About the zeros on "GT-I8000 (000-0000-0000)", that's ok since I had no SIM card on the phone.

Link to comment
Share on other sites

hahahaha you will not believe how stupid i am..

i read that some guy here flashed his b7610 with a i8000csc so he could update to wm6.5 and for him it worked appearently...

so i thought lets install THIS fake csc and see what happens (i only read the first three posts T_T) well it kinda worked...

my phone boots

phone thinks he's a omnia II at start up lol

phone thinks its a wm6.5 (according to start>settings>adcanced settings>system>version>windows mobile)

but

sounds are little "plops" now 0o

and what else i dont get is, how come i have the wm6.5 menu ? because, yes he thinks its wm6.5, but he IS a 6.1 so shouldnt he have the normal wm6.1 menu?

oh..and i definitely feel its a bit quicker ? how's that possible ? :S maybe the fresh install.....

well thought id let you guys know...dunno, might me useful for something...

I think i found out what is wrong with the sound!

the values of the "music speaker" in the hidden sound menu (call>*#0002*28346#) are set to "000"

When i change them to "110" and "1110" and press apply i get a notification of succes...however, after a reboot the values are set back to "000" :S anyone any idea what im doing wrong?

Jin

-edit- forgot to mention that the upgrade @ NPS obviously failed

Edited by vjin
Link to comment
Share on other sites

Hi everyone,

i read that a lot of people wanted to do an official update using new pc studio k1 version( i was one of the people) after using secany or zorg firmware.

So i decided to give it a try.

Basicly nps detects which country you o2 is from using the csc file.

Problem the i8000xsoih1.csc can not be found.(For singapore)

So i decided to create a FAKE ONE based on famih4

and i was successful.

So i downgraded to i8000XXIH3 using zorg version

And phone dxih2

and using my fake csc.

So ihad

PDA: I8000XXIH3

CSC: I8000XSOIH1

PHONE: I8000DXIH2

and when i connected my phone to new pc studio i was prompt for the upgrade.

If you install NEW PC STUDIO VERSION H2_H5 instead of k1

http://org.downloadcenter.samsung.com/down...1.2.1.IH2_5.exe

NPS will update you to official H5 and it will overwrite my fake csc with the original one

PDA: I8000XXIH5

CSC: I8000XSOIH1

PHONE: I8000DXIH2

iI have attached my fake csc file.

As usual i am not responsible for any damage,brick, loss of data that can occur .

Tylwith

so, how does the genuine SS WM6.5 compare to the Secany and co ones??? Did all the effort that we went to to find and report bugs help get a nice clean release with all the fixes rolled into it <he asks naively yet ever hopeful>

Link to comment
Share on other sites

started the software upgrade, but after my phone shut down, nps showed "failed to detect device" and the process stopped. had to use octans to flash it back to ih5. is this normal and should i just have waited?

Edited by alas6
Link to comment
Share on other sites

For those try to updates using this method but fail, I believe is Windows issue because normatter how hard I try, it still prompt your device is not supported.

I get fed up, and found a PC running Windows XP, and bravo! it detect my device and updates accordingly!

I assume beside the detected CSC issue, it also detecting your Windows. I might wrong, I not sure about it. I just knew it is not detected my device is support when running updates in Windows 7, but it is working when I choose updates under Windows XP.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.