Bricked i900: Stuck on Samsung omnia screen

[Guest Geraldous]

Angel asan k b d2 pinas ako n nga lang aayos ng phone mo pero pa kape mko hehehe

napaayos na nga po.. 5k daw.. parang ang mahal.. minsan nang-aabuso mga technician kahit na hindi naman masyadong costly yung process.

@angel: parang mahal.. nywei, thanks for answering.. Merry Christmas.. :)

Edited December 24, 2009 by Geraldous

[Guest puga74]

napaayos na nga po.. 5k daw.. parang ang mahal.. minsan nang-aabuso mga technician kahit na hindi naman masyadong costly yung process.

@angel: parang mahal.. nywei, thanks for answering.. Merry Christmas.. :)

Ang MAHAL grabe! I flaflash lang naman.

[Guest ...angel...]

Angel asan k b d2 pinas ako n nga lang aayos ng phone mo pero pa kape mko hehehe

sir you can't repair a broken eboot without jtag pinouts and jtag interface... and these tools are very expensive(200+ Euros)... it also needs some soldering and must be done by a professional,,,

napaayos na nga po.. 5k daw.. parang ang mahal.. minsan nang-aabuso mga technician kahit na hindi naman masyadong costly yung process.

@angel: parang mahal.. nywei, thanks for answering.. Merry Christmas.. :)

mahal talaga,,, pero 2 lang sila sa pilipinas na kayang gumawa ng phone ko,,, nobody else can. sure ako dyan.

Ang MAHAL grabe! I flaflash lang naman.

do you know how to repair a broken eboot? it's not just a software problem,, it's a board problem,, it can't be repaired without jtag,,, ask the experts.

[Guest rhomah]

sir you can't repair a broken eboot without jtag pinouts and jtag interface... and these tools are very expensive(200+ Euros)... it also needs some soldering and must be done by a professional,,,

mahal talaga,,, pero 2 lang sila sa pilipinas na kayang gumawa ng phone ko,,, nobody else can. sure ako dyan.

do you know how to repair a broken eboot? it's not just a software problem,, it's a board problem,, it can't be repaired without jtag,,, ask the experts.

hello po ate...just read your post about this bricked omnia...and actually i did bricked my omnia yesterday...and i went immediately to the samsung shop in MOA but then they say that my omnia isn't repairable, what they mean is the mother board should be replaced, but then i saw your posts and wondering where can i have my omnia be repaired? pls ate....thanks....ASAP

you can send me an email: [email protected]

need your help guys so badly......

[Guest downjones]

Guys I got a big problem! :D

I tried to flash my phone part with the phone.bin then when it was almost at 100% my pc screwed up and restarted!! Well the pda starts but it can not start the phone process anymore! I click on turn phone "on" and it nothing happens, it trys but thats all....

Now if I use originally extracted pda.bin; eboot.nb0; customer.csc and phone.bin from the official DXIA5.....open them with UMDL Grandprix v1.8.6 for XP, diactivate the "Allow USB connections" in ActiveSync and get following:

OnDeviceChange:DBT_DEVTYP_DEVICEINTERFACE

(1) Device name:6&22194588&0&1

PDA Device 1 detected.

---------------------------------------------------------------------------------------

PDA 1 starts downloading...

---------------------------------------------------------------------------------------

EBOOT will be written.

Total 1 PDA region(s) will be written .

PHONE will be written.

Don't plug it out until the label becomes blue!!!

---------------------------------------------------------------------------------------

(1) FlashImage : success!!

(1) Re-Boot device and Close USB port

(1) Wait for Re-Connecting Device.

(1) Wait for Re-Connecting Device.

(1) Wait for Re-Connecting Device.

(1) Device is Re-Connected.

(1) Re-Init. Success.

(1) FlashImage : success!!

(1) file handle (3b794c)

(1) FlashImage.PDA : success!!

(1) DownloadImagePDA.PDA : success

Downloading CSC...

CSC finished.

(1) Now Port is Matched id:0, g_nOpenPhonePort:0

(1) Change usb Success

(1) DL_MSG_PORT_OPEN_FAILURE- cnt <= 0 ---PORT OPEN FAILED!

PLEASE, WHO CAN HELP?

[Guest adsdfs]

hi everybody n masters of rom,i'm fr myanmar . i need help urgently. my omnia i 900 was good till i flashed i908 new rom.i repeatedly flashed mu rom .it was ok then . but now today with i 908 rom .my omnia stuck at 49 % u noe what i mean. i tried thr xp, window 7 thru exe n also grandprix. all the same . stuck at 49 %. so i r\tried other rom. worse !stuck at 3 % .help me out here quick plz

[Guest manoy69]

i manage to repair my omnia while stuck on samsung omnia screen tru grandprix . the key is if your computer is able to recognize ur phone or if you hear a sound when you connect your pc to your phone then it can be repaired by grandprix .

but if you see blank screen or monahans when u power on your phone . then it is a boot problem that is much harder to fix .

its not true that here in the philippines only 2 person is able to repair that and 5000 pesos is way too expensive . here in the philippines you can bring your phone with broken eboot at samsung main service center located in front of greenhills ortigas side . name of the building bonaventure . their charge is only P1100 . as of feb 2010 other samsung service center in phils dont do eboot repair yet .only their main branch in greenhills so far . i hope this helps

[Guest katorse14]

been browsing through the net regarding JTAGs

i've been doing JTAG before on my XDA flame so whenever i got it bricked, i'll just solder in the JTAG

all i need are diagrams and the software part, anyone here who has them?

although i haven't bricked my phone YET (im not flashing and im stuck with the default ROM LOL)

its better be safe than spend alot,

tia

-katorse14

[Guest AzharTheGreat]

Maybe you should check your USB cable as well, is it a hotsync cable? I've had troubles syncing using the wrong cable.

my phone is stuck in 19%, plesae help me.