iGO Primo on Omnia 2

[Guest Dado...]

i told before to when you use licenses for FDA files you must have fixed iGO.exe to avoid Out of memory problem, but nobody read...

[Guest lastnikita]

all links are dead.. Could someone please repost gpsmtc.dll & above all latest data.zip for our device ?

Thanks !

[Guest XeOS]

all links are dead.. Could someone please repost gpsmtc.dll & above all latest data.zip for our device ?

Thanks !

+1

All links that I found so far - here and on the internet - have been killed of by RS, so please reup to other...

My sincerest thanks!

[Guest Opuske]

+1

All links that I found so far - here and on the internet - have been killed of by RS, so please reup to other...

My sincerest thanks!

I uploaded everything to megaupload.

Or atleast everything that i use on my omnia2 is in it.

And with these files i have it working perfectly without any problems.

Link = http://www.megaupload.com/?d=OB6W4YIY ( jinges.rar )

Edited July 3, 2010 by Opuske

[Guest XeOS]

I uploaded everything to megaupload.

Or atleast everything that i use on my omnia2 is in it.

And with these files i have it working perfectly without any problems.

Link = http://www.megaupload.com/?d=OB6W4YIY ( jingles.rar )

Working like a charm now, thanks buddy!

[Guest Opuske]

All is working perfectly here with me except for TMC.

I installed hypergps and poweradio as described on http://phj.hu/i8000/TMC/

when i click TMC in hypergps it gives me "device error" but when i click TEST i works fine.

So then when i open igo primo there is no TMC info also it does not scan for radiostations.

Primo shows me 2 tmc channels standard already in the config but those are not excisting anymore here.

How can i get TMC to work and how can i get primo to scan channels ??

Anyone has a easy way for that ??

Much appreciated for ur help in advance.

[Guest Dado...]

did you enter TMC data in sys.txt (or you not read post in this topic)?

[Guest Opuske]

did you enter TMC data in sys.txt (or you not read post in this topic)?

This is what i have in my sys.txt

[tmc]

port="COM,6"

baud=38400

source="royaltek"

enable_subscription=1

;harman eten galik opentmc2 opentmc1 hyundai samsung amaryllo royaltek gns

And like i said hypergps works (gives me device error tho but nonetheless it receives tmc data so i disabled also error reporting) but primo does not want to see any channels except for the 2 that are already somewhere in the configs that do not exist anymore here.

Does not scan nor do i see it do anything.

Ps: Dado i sended u a pm asking for the tmc files in the primo folder (gpsmtc.dll and maybe that other file also ?)

can u send them to me pls ?

If they are for the samsung omnia 2 that is :)

Edited July 4, 2010 by Opuske

[Guest Dado...]

i never receive any error message with HyperGPS.... did you install right version?

[Guest Opuske]

i never receive any error message with HyperGPS.... did you install right version?

I seem to had a wrong version perhaps in igo of the dll.

But i took the correct dll from my neighbours samsung + igo 8.3 and now tmc works perfectly in igo primo.

And i also edited the system.ini in the save folder cause somehow it did not save the correct port either there.

Thx anyway m8

These are the 2 files i took :

TMC.rar

Edited July 5, 2010 by Opuske

[Guest Scorpie]

The megaupload link is dead too...

[Guest Scorpie]

Well not that anyone cares or has experienced the problem I reported before judging by no reply or other reports of this but........

I have fixed the gps turning off and on again in Igo even though Garmin worked flawlessly.

I changed the program gps port back to the default com7 in samsung settings and edited the sys.txt to be com7. And surprisingly Igo works fine now. Left the baud rate at 38,400 but did add a line in the sys.txt file for the gps to say the source is "nmea".

Thanks Pete B, I am having the same problem you had and I will try your solution :)

[Guest Opuske]

The megaupload link is dead too...

i noticed that yea........it sucks :)

ill post another link in a few minutes

Edited July 6, 2010 by Opuske

[Guest Opuske]

Here is another link with igo stuff

Docs.rar password = 852654

[Guest XeOS]

Don't know whether people know this already, if you use the voices that come with it, it is very fluid, if you use the old voices ( I wanted Dutch) it will bog down and have the same speed as iGO 8.x.

[Guest lastnikita]

well for me it's slower than iGo 8, and I use voices that came with it :)

Can't wait for a portrait mode, as landscape is useless in my car, can't charge nor listen to my music at the same time...

Does someone know about driver alerts & pre-calculated routes files ? Can't find any :-/

Please PM me ! =)

Edited July 6, 2010 by lastnikita

[Guest Omega Ra]

I can't get this working. When i manually rotate my screen to landscape and start it I get a black screen, but if I try to start it in portrait I get half the iGo start screen and it freezes.

[Guest Dado...]

no need for rotation screen

just use this data.zip

http://rapidshare.com/files/406530747/data...0_240_Primo.rar

and this sys.txt (change only gps and tmc port for your O2)

http://rapidshare.com/files/406533450/sys.txt

(please dont share this links on others forums... if you share is much possibility to be deleted)

Edited July 23, 2010 by Dado...

[Guest Omega Ra]

no need for rotation screen

just use this data.zip

http://rapidshare.com/files/406530747/data...0_240_Primo.rar

and this sys.txt (change only gps and tmc port for your O2)

http://rapidshare.com/files/406533450/sys.txt

(please dont share this links on others forums... if you share is much possibility to be deleted)

downloading now, will let you know if it works :(

[Guest Omega Ra]

Well the load screen is right now, but it never loads, just a small bit on the progress bar then nothing...

[Guest naxos]

thank you....always say gps is off i activied but after one minute i must do it again any solution please

[Guest Dado...]

did you enter correct gps port in sys.txt?

[Guest Pete B]

Regards gps turning off and on.... Read my post in this topic - http://www.modaco.com/content-page/310164/...mnia-2/page/60/

I don't think you need to add the gps type though. If it still doesn't just by changing the gps port ask me for the extra line I put in the sys.txt because I can't remember it off the top of my head.

Edited July 24, 2010 by Pete B

[Guest naxos]

did you enter correct gps port in sys.txt?

yes my port is com 4, but always says gps is deactivated

[Guest slk01]

Hi everyone,

Here is data.zip for 800x480 resolution. It's work on my O2 with skin GJmpp 1.12_800x480 (beta2) :( :

http://rapidshare.com/files/408925368/data_v4.zip

edit sys.txt:

[rawdisplay]

highres=0

screen_x=800

screen_y=480

class="landscape"

[interface]

resolution_dir="800_480"

vga=0

show_exit=1

extra_settings=1

[screen]

preferred_orientation=2