Guest Cass67 Posted December 13, 2010 Report Posted December 13, 2010 (edited) Stupid question, ADB works ok for you all on alpha 3 of this build ? Seems my usual methods on Linux do not work for me . always results in device not found .. Wondered if ADB is disabled out the box regardless of the gui thinking its enabled. Connecting phone to system shows in dmesg that it detects removable disk and when i enable mass storage it mounts fine, just ADB is problematic ..weird. EDIT : - Ignore that Q, adb works fine in OSX, seems my linux is playing silly buggers .. Edited December 13, 2010 by Cass67
Guest hedgepigdaniel Posted December 13, 2010 Report Posted December 13, 2010 Hey I've been using this ROM for a few days now, most things are working very well. I have noticed one bug though, perhaps you are interested: When leaving the phone locked for a longish period of time (leave it somewhere and forget about it sort of thing), the touchscreen sometimes completely stops responding, leaving me with no way to unlock the phone other than taking out the battery.
Guest Cass67 Posted December 13, 2010 Report Posted December 13, 2010 Hey I've been using this ROM for a few days now, most things are working very well. I have noticed one bug though, perhaps you are interested: When leaving the phone locked for a longish period of time (leave it somewhere and forget about it sort of thing), the touchscreen sometimes completely stops responding, leaving me with no way to unlock the phone other than taking out the battery. Seems this is a known issue, workaround is to use the pattern lock screen from security in settings, ive not seen a hang yet with this.
Guest mtrim Posted December 13, 2010 Report Posted December 13, 2010 Seems this is a known issue, workaround is to use the pattern lock screen from security in settings, ive not seen a hang yet with this. It has still locked up for me when using the pattern lock. Last was this morning. I assume that it is a process using all the cpu. My phone was fully charged and working when I left home this morning. At the office 1.5 hours later it was locked up. After restarting the battery was showing 76% - 10 hours later, with only occasional email use, it is showing 68%.
Guest zuti Posted December 14, 2010 Report Posted December 14, 2010 (edited) Nevermind :) Edited December 14, 2010 by zuti
Guest lpinho Posted December 15, 2010 Report Posted December 15, 2010 (edited) Before with the previous rom I was using I could at least get a GPS signal even if it was in the wrong place. Now I get nothing with or without Wifi and have tried downloading GPS status and playing around with the settings. I'm on Vodafone can anyone help? Hi, I don't know if it's a coincidence (the last few times I had to use GPS, the weather was very cloudy and this can affect locking times), since I install R4 my GPS applications are taking a bit more time (minutes) to lock. I used to have sebastians rom, but I needed a2sd, and since Paul delivers that as an option in the kitchen, I started using this version. But I remember to have an almost instant lock when I entered the GPS's applications. Edited December 15, 2010 by lpinho
Guest PsychoChimp Posted December 15, 2010 Report Posted December 15, 2010 Any news on the TFT version of this ROM? Chimp
Guest yekxmerr Posted December 15, 2010 Report Posted December 15, 2010 Hey Paul, are you going to support this rom on the TFT devices ? I would love to have this piece of great work on my phone, since i dont relate very well to other roms. I like it very stockish lol Regards :)
Guest Quu Posted December 15, 2010 Report Posted December 15, 2010 (edited) Hi, im getting this ZTE Blade phone. Problem is its a slightly customized finnish operator (Saunalahti) phone. It has TFT screen instead of amoLED(?) and 5mpix camera. I have heard results of putting Modaco rom inside and having problems (screen freeze, too small icons etc. because of the different drivers i suppose. So is there a slight possibility to create a custom rom for us? :) If you need some ROM dump i can provide it on next week. This ROM is for OLED-screened phones, Finnish ones got TFT. And ROM-dumb from original Saunalahti is already atleast 8 places on this forum. edit: also, was not on last page when replying this.. :| edit2: also, ignore this whole post.. Edited December 15, 2010 by Quu
Guest _Carl_ Posted December 16, 2010 Report Posted December 16, 2010 I'll be updating this ROM to R5 (TFT compatible) early next week. :) P Excellent news! =] Looking forward to using your rom on my TFT SF Keep up the good work! ^^
Guest tralivali Posted December 17, 2010 Report Posted December 17, 2010 My WiFi keeps disconnecting after some minutes of work. What's the matter? I don't know whether this problem presented on the original stock firmware, but it does present in MCR.
Guest Genieuk Posted December 17, 2010 Report Posted December 17, 2010 I've got the stock ROM on my week old San Frans, after reading lots of comments on the various ROMS, this one seems the most stable (?). Anyway, mines a grey TFT, is it safe to flash this onto it, or should I just wait for Paul to update it R5 (not sure when that'll come). I'm getting twitchy, just wanna flash it to something stable without the Orange cr*pware.
Guest _Carl_ Posted December 17, 2010 Report Posted December 17, 2010 (edited) Anyway, mines a grey TFT, is it safe to flash this onto it No! currently this is OLED only (saying that it probably wouldn't damage the phone) we have to wait until R5 :) Edited December 17, 2010 by _Carl_
Guest kidimon Posted December 17, 2010 Report Posted December 17, 2010 everything works very good but! when phone goes to screen time out, it newer comes back :/ i mean u can press anything but display doesn't light up.Only way to get it work is by taking battery out and turning it back on. Could anyone please help me? Thanks in advance :) btw now i`v set screen timeout to 30 minutes lol.
Guest kidimon Posted December 18, 2010 Report Posted December 18, 2010 everything works very good but! when phone goes to screen time out, it newer comes back :/ i mean u can press anything but display doesn't light up.Only way to get it work is by taking battery out and turning it back on. Could anyone please help me? Thanks in advance :) btw now i`v set screen timeout to 30 minutes lol. update: fixed screen timeout with putting original san francisco rom on ;)
Guest wellb_b Posted December 18, 2010 Report Posted December 18, 2010 (edited) Before with the previous rom I was using I could at least get a GPS signal even if it was in the wrong place. Now I get nothing with or without Wifi and have tried downloading GPS status and playing around with the settings. I'm on Vodafone can anyone help? I am on Orange and as the sim lock dissabled when I alpha3-4'd the rom I tried a 3 sim and have the same problem. GPS will not find position. Where ya at Paul? Help us out mate. :) EDIT:Sorry Paul it does work... just tried it again outside. NooooooB!!!! Edited December 18, 2010 by wellb_b
Guest wellb_b Posted December 18, 2010 Report Posted December 18, 2010 (edited) To those having a problem getting a data connection with r4: Get the apns-conf.xml from alpha3-update-modacocustomrom-blade-kitchen-unsigned.zip, it's in /system/etc/ Overwriting the one in r4 worked for me on Orange payg. Hi Any idea if this would have a positive affect on GPS :) Sorry people my GPS is working....NoooooooB Edited December 18, 2010 by wellb_b
Guest Bobbajob Posted December 19, 2010 Report Posted December 19, 2010 I've just installed this rom from the Online Kitchen and was looking for a big app to see whther the A2SD was woking properly, so went looking for Google Earth. It's not there. Shows up fine on my Desire, but even linking to it from appbrain brings up item cannot be found. Any ideas how to get this to show up? And possibly other missing apps? Thanks.
Guest rikuumi Posted December 19, 2010 Report Posted December 19, 2010 What happens if I try to install this on TFT phone?
Guest NightSt@lk3r Posted December 20, 2010 Report Posted December 20, 2010 You will get messed up colors and once the phone goes into standby the only way to get it out again is to remove the battery + many other issues probably.
Guest _Carl_ Posted December 20, 2010 Report Posted December 20, 2010 You will get messed up colors and once the phone goes into standby the only way to get it out again is to remove the battery + many other issues probably. and that's only if you can get it to actually boot... (mine didn't)
Guest youngbrov Posted December 20, 2010 Report Posted December 20, 2010 I'm pleased to present my MoDaCo Custom ROM for the Orange San Francisco (aka ZTE Blade)! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know. ;) Remember that if you use this ROM, you do so entirely at your own risk! About MoDaCo Custom ROMs MoDaCo Custom ROMs are based on official ROMs - either shipping or leaked. A MCR release is designed to feel as far as possible like a stock ROM, with optimisations, tweaks and complimentary additions that enhance the user experience. The aim of a MCR is to be ultra reliable for use on an everyday device. Requirements In order to install this ROM on your device, you must have the ClockworkMod recovery installed. FeaturesBased on the OUK_P729BV1.0.0B05 ROM releaseHardware acceleration enabledStock kernelPre-rooted with su and Superuser Permissions by ChainsDDBuilt, tweaked and massaged with the MCR build process which boosts the speed of the ROMbusybox with Droid Explorer supportMCR version displayed in 'About' screenUpdated Google Maps and Street ViewAdded Adobe ReaderAdded Car DockAdded Email applicationAdded Google TalkAdded Voice SearchAdded Spare Parts (switch both animations to fast!)Added WiFi Status indicatorAdded Genie News / WeatherRemoved Orange boot logoAdded MCR boot logoRemoved a multitude of Orange junk, Glu games are still presentRemoved DocumentsToGo (same trial version is available from the Android Market)Removed MobileWeatherRemove Orange default wallpaperWiFi TweaksOnline KitchenOptional ROM ManagerOptional Titanium BackupOptional Wavesecure via the online kitchen (installed to system partition for maximum security)Update from ERE27 to a later Eclair releaseCustom kernelChange button theme from dark to lightInvestigate possibility of odexing the ROMMore stuff i've probably forgottenChangelog Please see 2 posts below this one for the changes in each release.Downloads This ROM is also available in update.zip format (for ClockworkMod Recovery) in the online kitchen in the post below this one.for installation via ClockworkMod Recovery: r4 (default kitchen options) - DOWNLOAD (ROMraid Load Balancing) - MD5: 05c8445bd0c5a19136d8955fe5baa542for installation via ClockworkMod Recovery: r4 (default kitchen options, no MoDaCo Additions) - DOWNLOAD (ROMraid Load Balancing) - MD5: ea16544c56d4c0bec8454ce312b8c5fcInstallation To install this ROM using ClockworkMod Recovery: [*]Download the update zip above and copy to your SD card. [*]Restart your device in recovery mode (turn on your device with 'Volume Down' held). [*]Use the recovery menu to apply the update zip. Upgrading No wipe is required to use this ROM. Reverting to stock A stock ROM image can be found in this topic. Thanks It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect. And finally... If you would like to show your appreciation for the ROM, please consider supporting MoDaCo by signing up for a MoDaCo Ad Free or MoDaCo Plus account, both of which also give you early access to Beta ROM releases and access to the the online kitchens. Enjoy! :) PDoes this have the normal lock screen or the pendulum lock screen.
Guest Odes1 Posted December 21, 2010 Report Posted December 21, 2010 All of the MCR ROMs for 2.1 have the "normal" lock screen :).
Guest rikuumi Posted December 21, 2010 Report Posted December 21, 2010 Is there any way to backup my files / apps and then install some ROM over it but apps and settings aren't gone?
Guest Odes1 Posted December 21, 2010 Report Posted December 21, 2010 Is there any way to backup my files / apps and then install some ROM over it but apps and settings aren't gone? Use clockwork to perform a backup :). You will then be able to do a complete restore of your current setup.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now