Guest vidavi Posted February 15, 2011 Report Posted February 15, 2011 Installed on Storage Card, everything seems to work well, except that sometimes i cant connect to wlan(unable to start wlan), and after few restarts wlan comes back again. Is there any solution for this to avoid restarts?
Guest felalex Posted February 15, 2011 Report Posted February 15, 2011 Hi All, I was wondering, did anyone try/succeed installing a AnySoft or other keyboard? I've tried to install AnysoftKeyboard and it was installed, I've tried to enable it via Settings->Language & keyboard by checking the checkbox right to the keyboard name, but my input was still by AndroidKeyboard. Moreover, there was no checkbox next to AndroidKeyboard that could enable/disable it. Thanks,
Guest Pete B Posted February 15, 2011 Report Posted February 15, 2011 Hi All, I was wondering, did anyone try/succeed installing a AnySoft or other keyboard? I've tried to install AnysoftKeyboard and it was installed, I've tried to enable it via Settings->Language & keyboard by checking the checkbox right to the keyboard name, but my input was still by AndroidKeyboard. Moreover, there was no checkbox next to AndroidKeyboard that could enable/disable it. Thanks, You need to push and hold the icon on the bottom left of the keyboard and select your other keyboard. I think the icon is yeelow and will bring up an options list. I have installed and setup swype so it def works
Guest Clemenzo Posted February 15, 2011 Report Posted February 15, 2011 If you have not tried the original o2b2filesys package then try a fresh install with that, follow by the 2011-02-10 bugfix follow by the 2d/3d update. Other things that I did, with my SD card From WINMO Mount SD card as storage Still running WINMO, connect phone to Ubuntu machine, run sudo -s (do this once then you dont have to worry about sudo for each following command) gparted Delete all partitions on SD card, /dev/sdd Then create two partitions as follow 1st primary partition size 2047 FAT32 2nd primary partition size 2047 EXT2 then (fdisk -l to list all available partitions) mount /dev/sdd1 /media/disk1 mount /dev/sdd2 /media/disk2 Extract haret.exe. default.txt, zImage, and o2bete (for completeness) from the o2b2filesys on to disk1 Extract on to disk2 the rest of the packages in the order outlined earlier. Then sync;sync;sync umount /media/disk* that were all I did, it works everytime now, root et all. Thanks but I think I'll wait for next beta.. am using another calculator from market.
Guest Clemenzo Posted February 15, 2011 Report Posted February 15, 2011 I downloaded and installed Advanced Task Manager Free from market and I start it when beta2 just boots ok. Then I see email, messages, clock, etc applications already running. Are they expected to load on boot?
Guest bobhero Posted February 15, 2011 Report Posted February 15, 2011 You need to push and hold the icon on the bottom left of the keyboard and select your other keyboard. I think the icon is yeelow and will bring up an options list. I have installed and setup swype so it def works does swype work with speech to text? I haven't yet found any way of doing speech to text for input fields.
Guest Pete B Posted February 15, 2011 Report Posted February 15, 2011 does swype work with speech to text? I haven't yet found any way of doing speech to text for input fields. Not sure but haven't tried. Come to think of it I haven't even explored or noticed text to speech with all the other distractions
Guest felalex Posted February 15, 2011 Report Posted February 15, 2011 You need to push and hold the icon on the bottom left of the keyboard and select your other keyboard. I think the icon is yeelow and will bring up an options list. I have installed and setup swype so it def works Thanks, it worked :D
Guest Rapid81 Posted February 15, 2011 Report Posted February 15, 2011 did u change ur card? does it help upgrading the memory card? I'm using my iGO simple 2GB SD card and everything is fine with that.
Guest Omid King Posted February 15, 2011 Report Posted February 15, 2011 When I go to My Storage and click on haret.exe , It booted up Windows Mobile again. Can someone help me?
Guest carlospaco Posted February 15, 2011 Report Posted February 15, 2011 Hello, I have did a clean install Beta 2 on sd, everything works great 3g,wifi,etc.... BUT when it goes to sleep, i can't wake him up. Then i have to pull off the baterry, i am desperate. HEEEEEELP MEEEEE :D
Guest crusssader Posted February 15, 2011 Report Posted February 15, 2011 + I feel the same kernel panic shows the same and should retsart
Guest forajido Posted February 15, 2011 Report Posted February 15, 2011 Great work...love my Omnia2 now :D Windows sucks.. Couldn't download from market ("starting download") like many others..and google solutions didn't work. had to create a new google account, worked then :D I solved this problem this way: - Restart phone - Run Haret - Open Market, go to downloads and cancel download - Click Download again - It begins downloading I don't know how or why, but it does work for me. Greetings.
Guest surenz Posted February 15, 2011 Report Posted February 15, 2011 Again for all the people suffering from Sleep of Death: Install SetCPU, configure it to not go lower than 133 MHz and put it in conservative mode. Since I've done this, I haven't even single Sleep of death, neither freeze or spontaneous reboot. 16h since unplugged and I'm on 23%. Used to wake me up today morning and for some music and try of the GPS. Still the most consumption comes from Cell standby.
Guest Gruven Posted February 15, 2011 Report Posted February 15, 2011 Forgot to post new CPU libs here... Original post
Guest radie Posted February 15, 2011 Report Posted February 15, 2011 Forgot to post new CPU libs here... Original post have you tested it? no crash??
Guest vd69 Posted February 15, 2011 Report Posted February 15, 2011 Forgot to post new CPU libs here... Original post Gruven sorry but i can not download and i dont understand so good russian . Please make onother link .
Guest FactionOne Posted February 15, 2011 Report Posted February 15, 2011 (edited) OK, another little update. Last post I described the boot-ups during setup of my most recent installation. On the fourth-boot everything seemed to be running fine. It ran for just around/over 24 hours; I fell asleep with it on charge last night, and woke-up to the sound of the Windows Mobile alarm - so Android must've rebooted at some point. I booted up again, but Android crashed when I unlocked it. Next time I had sleep of death. After that it ran OK for a little while; but now sleep of death is definitely back. I can't reinstall again until I'm back from work, but I will, and maybe will have a go with the CPU libs above ^^^ Maybe behaviour will change... Rob. EDIT: Has anyone got any ideas about using flash-optimised filesystem? (Do we know if our kernel supports any?) Perhaps there is a way to build a YAFFS(2) image or something like that? Edited February 15, 2011 by FactionOne
Guest FactionOne Posted February 15, 2011 Report Posted February 15, 2011 Gruven sorry but i can not download and i dont understand so good russian . Please make onother link .I used Google Translate to get to the post with the link: HERE - but there's a 404 when I click it; I can't imagine a 404 would be displayed if it's just hidden from guests? To have a look at the page in Google Translate (you can choose your language at the top of the screen): CLICK Rob.
Guest Javier Ilustre Posted February 15, 2011 Report Posted February 15, 2011 (edited) Hi, first of all, thanks for the beta. I've been waiting for this for so long that I only got to check this recently. Anyways, I'm not sure if it has been posted here already but I have a problem with the installation. The first time I did it, I had no problems creating the partition, etc. But when I ran haret.exe from My Storage, it won't boot up Android as listed in Post #8. So I did the entire thing again. I reformatted my SD card and when I run haret.exe from o2beta, I get the error message that "Partition 1 is already defined, delete it before re-adding" I get a "Kernel panic - not syncing: Attempted to kill init!" message and my phone reboots. Help on this one! I tried to check if there is a partition in My Storage, i found it to be not formatted. I delete the partition to get back the free space but now I can't merge it back to the rest of My Storage. Btw, I'm using Paragon Partition Manager for this one. EDIT: Oh yeah, the message "Not enough space on SD card..." also appears despite having the card formatted via Samsung settings. Edited February 15, 2011 by Javier Ilustre
Guest Sinistersky Posted February 15, 2011 Report Posted February 15, 2011 i got a question about this particular part: "Open MiniTool Partition Wizard Home Edition,select the Storage device Samsung and delete the partition->then click create and create 1020 Mb(in my case of 2 GB Internal Storage) FAT 32 partition(give it a name like disk0 without space),there will be left about 1 GB unallocated storage->select right button,click create partition format EXT2 (or EXT3) with a name like disk and select APPLY!->your My Storage will be formatted!!!you will see only 1 GB Storage device in My Computer in Windows." So, that means my whole My Storage will be limited to 1020 MB? I will loose all of my 8GB storage ?
Guest zhvihti Posted February 15, 2011 Report Posted February 15, 2011 In case anybody else gets the "Unable to scan for networks" message, I was able to solve the issue by removing /data/misc/wifi/bcm_supp.conf, which clears all remembered networks and passwords. Steps: Get a terminal from the market like "Terminal Emulator" and start it then type in the next commands: su cd /data/misc/wifi rm bcm_supp.conf Reboot Android and wifi should work again.
Guest problematika Posted February 15, 2011 Report Posted February 15, 2011 (edited) i got a question about this particular part: "Open MiniTool Partition Wizard Home Edition,select the Storage device Samsung and delete the partition->then click create and create 1020 Mb(in my case of 2 GB Internal Storage) FAT 32 partition(give it a name like disk0 without space),there will be left about 1 GB unallocated storage->select right button,click create partition format EXT2 (or EXT3) with a name like disk and select APPLY!->your My Storage will be formatted!!!you will see only 1 GB Storage device in My Computer in Windows." So, that means my whole My Storage will be limited to 1020 MB? I will loose all of my 8GB storage ? ne, kreirat ces od 8 GB (koje imas normalno) 2GB FAT32, 2GB ext2 (ili ext3, ja sam kreirao ext2) i ostat ce ti 3,nesto GB unlocated + 0,5 GB (za WM). to bi sve trebao vidjeti. Znaci kreiras FAT32, ext2 (ili ext3) i ostane ti nelocirano oko 3,5 GB + 0,5GB za WM. :D Sorry for lenguage...mate from my country! :D Edited February 15, 2011 by problematika
Guest dadme Posted February 15, 2011 Report Posted February 15, 2011 If you have not tried the original o2b2filesys package then try a fresh install with that, follow by the 2011-02-10 bugfix follow by the 2d/3d update. Other things that I did, with my SD card From WINMO Mount SD card as storage Still running WINMO, connect phone to Ubuntu machine, run sudo -s (do this once then you dont have to worry about sudo for each following command) gparted Delete all partitions on SD card, /dev/sdd Then create two partitions as follow 1st primary partition size 2047 FAT32 2nd primary partition size 2047 EXT2 then (fdisk -l to list all available partitions) mount /dev/sdd1 /media/disk1 mount /dev/sdd2 /media/disk2 Extract haret.exe. default.txt, zImage, and o2bete (for completeness) from the o2b2filesys on to disk1 Extract on to disk2 the rest of the packages in the order outlined earlier. Then sync;sync;sync umount /media/disk* that were all I did, it works everytime now, root et all. Tryed this on T*Omnia II koreean version. No chance to work. Got Kernel panic - not syncing: No init found. Try passing init= option to kernel. after first boot. Mounting SDCARD in Linux and starting Gparted got me to the point that second partition with all android files is gone and formated to FAT32 ( by the phone i think on card insertion) so at the and i have 1st primary partition size 2047 FAT32 with haret.exe, default.txt and zImage and 2 nd primary partition size 2047 FAT32 with a system folder on it created again, i supose by phone. Get me mad. Only working version it wos omlaxy 0.2 with works with a rootfs.img filesystem like on HTC HD2. Any ideeas on how het this particular type of Omnia II to work with Android?
Guest fusioncoast Posted February 15, 2011 Report Posted February 15, 2011 works finw with me nice realease only problem i have is importing contacts from sim also
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now