Guest crusssader Posted February 15, 2011 Report Posted February 15, 2011 hello the problem with different clock Win Mo and Android decision appears to be following in WINMO set the timezone GMT +0 London and Android in your time zone ... tested working correctly exuse me for my english
Guest Gruven Posted February 15, 2011 Report Posted February 15, 2011 have you tested it? no crash?? Sure. Working fine for me.
Guest alexovy Posted February 15, 2011 Report Posted February 15, 2011 kernel panic . not syncing: no init found. try passing init does anybody know what is the problem here? This is the fifth time this week that I am getting this kernel message. What files are corrupt...or missing? I had to reinstall everything...and this is happening like every 3...4 days.
Guest slmz Posted February 15, 2011 Report Posted February 15, 2011 kernel panic . not syncing: no init found. try passing init does anybody know what is the problem here? This is the fifth time this week that I am getting this kernel message. What files are corrupt...or missing? I had to reinstall everything...and this is happening like every 3...4 days. Its partition problem, try delete and remake partition.
Guest Sinistersky Posted February 15, 2011 Report Posted February 15, 2011 ok, so i installed to my storage using the guide in info...Everything installed fine i presume...but... The phone reboots after i get OK!IPC START TRANSFER!... I just get black screen and then auto-reboot... What should i do?
Guest nonione Posted February 15, 2011 Report Posted February 15, 2011 ok, so i installed to my storage using the guide in info...Everything installed fine i presume...but... The phone reboots after i get OK!IPC START TRANSFER!... I just get black screen and then auto-reboot... What should i do? add the 2d/3d libs to my storage!
Guest crusssader Posted February 15, 2011 Report Posted February 15, 2011 add the 2d/3d libs to my storage! + i have some problem add 2d/3d library and everyting is ok
Guest Sinistersky Posted February 15, 2011 Report Posted February 15, 2011 add the 2d/3d libs to my storage! yea...how do i do that? i tried with sudo commands in ubuntu...if i add them manualy from o2b2update.tar.gz then it gives the same thing.. idk xD :D
Guest crusssader Posted February 15, 2011 Report Posted February 15, 2011 yea...how do i do that? i tried with sudo commands in ubuntu...if i add them manualy from o2b2update.tar.gz then it gives the same thing.. idk xD :D just put in "o2b2update.tar.gz" in My storage and run Haret
Guest Sinistersky Posted February 15, 2011 Report Posted February 15, 2011 just put in "o2b2update.tar.gz" in My storage and run Haret same thing...wich 2d/3d drivers should i use?
Guest bu11d0g Posted February 15, 2011 Report Posted February 15, 2011 same thing...wich 2d/3d drivers should i use? dl from thread 1st page i use the 1.4mb file if u need, rename it to o2b2update.tar.gz good luck
Guest Sinistersky Posted February 15, 2011 Report Posted February 15, 2011 dl from thread 1st page i use the 1.4mb file if u need, rename it to o2b2update.tar.gz good luck tnx... do you have an idea how i should root the device?
Guest bu11d0g Posted February 15, 2011 Report Posted February 15, 2011 tnx... do you have an idea how i should root the device? from what i know the beta2 already comes rooted if u go to: settings > about phone and check the kernel version it says: root@devel
Guest crusssader Posted February 15, 2011 Report Posted February 15, 2011 (edited) same thing...wich 2d/3d drivers should i use? first use thisone http://www.modaco.com/content-page/322429/...8000/page/3020/ post 3031 second http://www.modaco.com/content-page/322429/...8000/page/900/# ver 1.3 just put in place where is Haret.exe Edited February 15, 2011 by crusssader
Guest ASMARTTECHIE Posted February 15, 2011 Report Posted February 15, 2011 same thing...wich 2d/3d drivers should i use? @Sinistersky use the same drivers that were first ever released ... FIRST EVER ORIGINAL ones rename to o2b2.. and put in my storage.. only the original ones work flawless .. at least for me.. btw i installed beta2 as: 1) clean format sd 2)use files from a 512/1024 beta1 3)paste filesys of beta2, rename to ext2... 4)paste 2d drivers after renaming to o2b2 for in detail steps follow the info thread .. it has something for beta2 install also..
Guest bu11d0g Posted February 15, 2011 Report Posted February 15, 2011 first use thisone http://www.modaco.com/content-page/322429/...8000/page/3020/ post 3031 second http://www.modaco.com/content-page/322429/...8000/page/900/# ver 1.3 just put in place where is Haret.exe can i just use these on top of the one i'm using right now without any problems?
Guest igorbr Posted February 15, 2011 Report Posted February 15, 2011 from what i know the beta2 already comes rooted if u go to: settings > about phone and check the kernel version it says: root@devel kernel version it says: root@devel #12 but rootexplorer says: "root access could not be obtained because su failed with following message: su: access granted, courtesy of www.magicandroidapps.com" and i can't get access on data folder...
Guest bu11d0g Posted February 15, 2011 Report Posted February 15, 2011 kernel version it says: root@devel #12 but rootexplorer says: "root access could not be obtained because su failed with following message: su: access granted, courtesy of www.magicandroidapps.com" and i can't get access on data folder... oh well, i haven't tried that yet maybe u should ask the linux pros around here hehe boa sorte
Guest forajido Posted February 15, 2011 Report Posted February 15, 2011 kernel version it says: root@devel #12 but rootexplorer says: "root access could not be obtained because su failed with following message: su: access granted, courtesy of www.magicandroidapps.com" and i can't get access on data folder... The same for me with last Rootexplorer version, but not with an older one. Try an older version.
Guest Pete B Posted February 15, 2011 Report Posted February 15, 2011 Again for all the people suffering from Sleep of Death: Install SetCPU, configure it to not go lower than 133 MHz and put it in conservative mode. Since I've done this, I haven't even single Sleep of death, neither freeze or spontaneous reboot. 16h since unplugged and I'm on 23%. Used to wake me up today morning and for some music and try of the GPS. Still the most consumption comes from Cell standby. So I have downloaded setcpu and set the minimum cpu as 133MHz. Now I didn't think I had rooted my phone but wondering if it was done at install. In the setcpu program the minimum it goes down to is 133MHz which it used to do down to 66MHz off memory. So I assume this means it is working and my phone must be rooted. I have set run at boot and think this all I need to do. Sorry I know it looks like all is done correctly buy just want to be 100% sure. P.S I was going to suggest for the info thread that they put the steps for rooting but it appears it doesn't need to be done on the new install. If this is not the case I will suggest to put it in the other thread.
Guest crusssader Posted February 15, 2011 Report Posted February 15, 2011 can i just use these on top of the one i'm using right now without any problems? yes i think
Guest surenz Posted February 15, 2011 Report Posted February 15, 2011 (edited) You can always follow the on screen realtime frequency whether your cpu is going to 66 MHz. The new beta 2 fresh install seems to be rooted out-of-the-box ... but I can't neither enter in the /data folder. Anyway this is not an obstacle to use the SetCPU. Unfortunately, I had one sleep of death when I connected my data cable. I think it's caused by my Linux laptop trying to work in some strange mode because this happens for second time already. No problems to charge the phone with the charger or to connect it to my Windows laptop (with Ubuntu VM included). Edited February 15, 2011 by surenz
Guest muchospesos Posted February 15, 2011 Report Posted February 15, 2011 Anyone managed to get sms from windows to android? I tried some methods but they couldn't do the job.
Guest slmz Posted February 15, 2011 Report Posted February 15, 2011 ok, so i installed to my storage using the guide in info...Everything installed fine i presume...but... The phone reboots after i get OK!IPC START TRANSFER!... I just get black screen and then auto-reboot... What should i do? I got this problem and solved it changing ext2 partition for ext3.
Guest surenz Posted February 15, 2011 Report Posted February 15, 2011 Anyone managed to get sms from windows to android? I tried some methods but they couldn't do the job. This method is working: http://android.riteshsahu.com/tips/importe...bile-to-android For the Android import use the http://android.riteshsahu.com/apps/sms-backup-restore
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now