Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 So ur advice is to install Adroid on ext3 and then update partition to ext4, rite? sorry for bothering but those are really my frst steps at Linux yes install android first check that its stable and proceed
Guest bofff Posted February 22, 2011 Report Posted February 22, 2011 yes install android first check that its stable and proceed gr8, thx for ur kindly help I ll try it this afternoon
Guest ricvec Posted February 22, 2011 Report Posted February 22, 2011 SEARCH IS WORKING! you have to select the above level and not directly the last discussion. my current setup is: - ext4, 2GB - modified zimage for ext4 - new cpu libs - new 2d/3d - button fix - no setcpu works on charger perfectly, but after unplugging i got sleep of death after 2min ;D sucks little bit. i charged the whole night, and rebootet one time. winmo says 86% battery, thats not enough. so probably i got now batterydrain problem or no charging (not usb). My setup before was the same but without ext4 and the modified kernel, without setcpu and it worked fine. and i had never the large power drain. Cause i didn't find out where the benchmark values came from, i couldn't test my phone so far. But as long as the ext4 is more unstable as my previous setup, i'll change back. edit: i will test ext4 setup with setcpu, lets see what happens to sleep of death. AND SEARCH DOESN'T WORK IN THIS FORUM AT ALL. LIKE MANY OTHER THINGS. PLZ FIX IT!
Guest dorosk Posted February 22, 2011 Report Posted February 22, 2011 SEARCH IS WORKING! you have to select the above level and not directly the last discussion. It will not search in the Android thread. Search for example for "o2bupdate.tar.gz" it will not show up.
Guest bennyhuang Posted February 22, 2011 Report Posted February 22, 2011 well this is what i did we need the beta2 from project page http://87.229.73.80/beta2_1024.zip we need vmware player and ubuntu Thank you very much! I make it. I'm using Ubuntu live CD. But now, the android can't be woken up from deep sleep even I set the cpu clock over 133MHZ with setcpu. Could you know what causes this issue? is it help if I update to ext4? Thanks again.
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 Thank you very much! I make it. I'm using Ubuntu live CD. But now, the android can't be woken up from deep sleep even I set the cpu clock over 133MHZ with setcpu. Could you know what causes this issue? is it help if I update to ext4? Thanks again. probably setcpu dont know try to boot with usb and without check the differences
Guest avantgarde280 Posted February 22, 2011 Report Posted February 22, 2011 SEARCH IS WORKING! you have to select the above level and not directly the last discussion. stupid... :huh:
Guest bennyhuang Posted February 22, 2011 Report Posted February 22, 2011 probably setcpu dont know try to boot with usb and without check the differencesI converted to ext4. seems working well so far.
Guest bennyhuang Posted February 22, 2011 Report Posted February 22, 2011 probably setcpu dont know try to boot with usb and without check the differences Hi Jim, where can I find the lib you said '3d lib by stu_2k1 and cpu libs somewhere in the first pages'. coud you show me a link? Thank you so much!
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 (edited) Hi Jim, where can I find the lib you said '3d lib by stu_2k1 and cpu libs somewhere in the first pages'. coud you show me a link? Thank you so much! xmm the are in this thread somewhere cpu lib somewhere at page 20 and 3d libs about 20 pages back Post #3171 page 159 couldnt find them ether so here you are http://rapidshare.com/files/449287110/Updates.rar can anyone tell me how to upload screen shoots ? Edited February 22, 2011 by jimmad
Guest Sinistersky Posted February 22, 2011 Report Posted February 22, 2011 ok...i applied every single update, even the updates.rar posted in previous posts... Now i get this wierd error: [ 481.619819] init: untracked pid 2422 exited request_suspend_state: wakeup (0->0) at 57102 6323874 (2011-02-22 16:22:58.112632018 UTC) and it repeats itself with different numbers about millions of times until i take out the battery myself... I am trying to run android on My Storage with the compiled modified ext4 zimage on an ext4 partition because none of the 3d drivers have worked for me because it rebooted everytime before bootup screen.. Now, what the badword is this goddamn error?
Guest slmz Posted February 22, 2011 Report Posted February 22, 2011 ok...i applied every single update, even the updates.rar posted in previous posts... Now i get this wierd error: [ 481.619819] init: untracked pid 2422 exited request_suspend_state: wakeup (0->0) at 57102 6323874 (2011-02-22 16:22:58.112632018 UTC) and it repeats itself with different numbers about millions of times until i take out the battery myself... I am trying to run android on My Storage with the compiled modified ext4 zimage on an ext4 partition because none of the 3d drivers have worked for me because it rebooted everytime before bootup screen.. Now, what the badword is this goddamn error? Same here. I did reinstall to stop freezes, following jimmad tuto and got freezes again on secound boot, after last pack of updates the boot stop on that error like you.
Guest Sinistersky Posted February 22, 2011 Report Posted February 22, 2011 (edited) Same here. I did reinstall to stop freezes, following jimmad tuto and got freezes again on secound boot, after last pack of updates the boot stop on that error like you. now i get this with a freeze on top [ 481.619819] init: untracked pid 2422 exited request_suspend_state: wakeup (0->0) at 57102 6323874 (2011-02-22 16:22:58.112632018 UTC) Unable to handle kernel paging request at virtual adress e3609f84 pgd = d0854000 Edited February 22, 2011 by Sinistersky
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 both reboot 2 3 times with usb on and off
Guest Sinistersky Posted February 22, 2011 Report Posted February 22, 2011 both reboot 2 3 times with usb on and off nope...didn't do a thing :huh: everything is the same
Guest fusioncoast Posted February 22, 2011 Report Posted February 22, 2011 everything was working fine untill a few days back i tried to dual boot using genYdual Boot but cudnt boot since my sd card dint have a copy of the files now when i boot i get a dump state_syslog error and i cannot open the Dialer
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 Sinistersky send pm to go step by step together if you want
Guest urkopi Posted February 22, 2011 Report Posted February 22, 2011 Why when I'm charging the battery the Android shows that I'm not, and on the other hand, when I'm not charging, it shows that I'm? Thanks!
Guest Sinistersky Posted February 22, 2011 Report Posted February 22, 2011 Sinistersky send pm to go step by step together if you want thank you for the interest, i sent you the pm :huh:
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 (edited) Edited February 22, 2011 by jimmad
Guest surenz Posted February 22, 2011 Report Posted February 22, 2011 (edited) deleted Edited February 22, 2011 by surenz
Guest CalvinH Posted February 22, 2011 Report Posted February 22, 2011 Followed jimmad method for installation and everything worked like a charm. Now I have my ext4-android running :huh: . Now let's see if it is more stable than the standard beta2 posted by the developers. Will post how the system behaves on the following hours. My first impression is that it starts much faster than before, and Home seems more "fluid". BTW, I installed it on a 600 Mb ext4 partition on my 4Gb SD Card (only 2 Gb My Storage) using lubuntu. Thanks once again to jimmad for the guide!. Regards.
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 (edited) glad to help ohh are my screen shots viewable now ? Edited February 22, 2011 by jimmad
Guest shoarmabakpao Posted February 22, 2011 Report Posted February 22, 2011 @ jimmad Why do I get on every test more points than you got? Very weird, my linpack was 9.4MFLOPS Quadrant, I always score something +- 300 I am using Ext2 on SD card
Guest jimmad Posted February 22, 2011 Report Posted February 22, 2011 @ jimmad Why do I get on every test more points than you got? Very weird, my linpack was 9.4MFLOPS Quadrant, I always score something +- 300 I am using Ext2 on SD card don't know why u should tell me what you have done with your phone don't make install ext2 on sd card at midnight with out reason eg does you phone run any services ? do you have class 10 sd card ? native android phone like zte blade score aroun 5,5 in linpack
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now