Guest problematika Posted March 27, 2011 Report Posted March 27, 2011 You can update putting it onto my storage and automatically install or manualy with ubunto on terminal. Yes, it will replace older drivers. o2b2update.tar.gz --->>> Mix Rapid + Stu grafic libs Tnx bro! :D
Guest kgp700 Posted March 27, 2011 Report Posted March 27, 2011 WIFI battery drain super! super! fast!! Use wifi - 1minute per 1% drain without use wifi - 15minute per 1% drain
Guest longsin Posted March 27, 2011 Report Posted March 27, 2011 WIFI battery drain super! super! fast!! Use wifi - 1minute per 1% drain without use wifi - 15minute per 1% drain hi, kgp700, can u upload ur 3.1? ur 2.9 is very good, but there is not camera in it. thk!
Guest kgp700 Posted March 27, 2011 Report Posted March 27, 2011 (edited) hi, kgp700, can u upload ur 3.1? ur 2.9 is very good, but there is not camera in it. thk! hi lonsin i will upload 3.2 version only camera preview working at 3.2 can not take picture some people take picture success with another camera app but quality bad and using camera, somtimes battery drain superfast(20% per 1second drained;:D Edited March 27, 2011 by kgp700
Guest longsin Posted March 27, 2011 Report Posted March 27, 2011 hi lonsin i will upload 3.2 version only camera preview working at 3.2 can not take picture some people take picture success with another camera app but quality bad and using camera, somtimes battery drain superfast(20% per 1second drained;:D thank ,ur replied, how time u will upload 3.2? i cannot still use 3.19, and u say another camera app. which one?
Guest Kanwar Raj Singh Posted March 27, 2011 Report Posted March 27, 2011 where can i find kgp 700 install versions...!!!
Guest longsin Posted March 27, 2011 Report Posted March 27, 2011 (edited) post 210# Edited March 27, 2011 by longsin
Guest Pete B Posted March 27, 2011 Report Posted March 27, 2011 I have a problem with my sd card being mounted in Android. I'm running Android on my storage. In the original betas it worked 100%. Then after beta 2 I used to have to remove the sd card and put it back in for Android to detect it. And this worked everytime. But since the new update I still get the message of sd card removed. It works in WM, it works as an external drive.... The card is brand new and does not have any problems with it. The card is a patriot 16GB Class 10 card. I have tried formatting in win mo. I have tried removing the partition and then reformatting again. I have tried formatting in windows.... I'm starting to think that maybe its the partition mapping is not right. I should note that on the boot screen the card is recognised as a 16GB card (reported as ~15GB). Could it have something to do with the init.rc file and the partition mounting? I had to change the /storage line to kop1 so o2b2updates would install.
Guest alexovy Posted March 27, 2011 Report Posted March 27, 2011 using the update from slmz stopped my radio functionality again. @slmz: is your radio running when the screen is going to sleep?
Guest carlospaco Posted March 27, 2011 Report Posted March 27, 2011 Hey guys, i have install beta2 with new kernel on my storage with ubuntu, everything went great but when i start haret , android don't work. What text do i have do change in default, i already did it like i read on this forum; mmcblk0p2 and i tried some others combination. I make the partition like disk0 and disk , one fat and the other ext2. I did extract it perfectly with ubuntu. Thanks and regards
Guest xibianliang Posted March 27, 2011 Report Posted March 27, 2011 (edited) I have a problem with my sd card being mounted in Android. I'm running Android on my storage. In the original betas it worked 100%. Then after beta 2 I used to have to remove the sd card and put it back in for Android to detect it. And this worked everytime. But since the new update I still get the message of sd card removed. It works in WM, it works as an external drive.... The card is brand new and does not have any problems with it. The card is a patriot 16GB Class 10 card. I have tried formatting in win mo. I have tried removing the partition and then reformatting again. I have tried formatting in windows.... I'm starting to think that maybe its the partition mapping is not right. I should note that on the boot screen the card is recognised as a 16GB card (reported as ~15GB). Could it have something to do with the init.rc file and the partition mounting? I had to change the /storage line to kop1 so o2b2updates would install. [/quote. if you suspect your sd card's partitions don't match the init.rc ,you can try to thwart the startup process by putting a edited default.txt with incorrect values and the error message will then show you what available partitions you have on sdcard and internal storage.hope it can somehow help you Edited March 27, 2011 by xibianliang
Guest xibianliang Posted March 27, 2011 Report Posted March 27, 2011 sorry the quote function did'n work.i sent it from android.i can honestly say android have been very stable since the frequent freezes were eliminated by using the lock button for back function!2 day without sod and freeze under heavy usage!very good!
Guest problematika Posted March 27, 2011 Report Posted March 27, 2011 sorry the quote function did'n work.i sent it from android.i can honestly say android have been very stable since the frequent freezes were eliminated by using the lock button for back function!2 day without sod and freeze under heavy usage!very good! Which keymapping do you use?
Guest tobv71doh Posted March 27, 2011 Report Posted March 27, 2011 Originally Posted by l3ong91 Okay, now just stick to Beta 2. 1. Install Beta 2. 2. Copy 3D drivers after device rebooted. 3. Put in the latest patch( 19 March). 4. Android should be running fine. well, I did this but it says in the kernel I get from the 02beta map: kernel panic: not syncing init, so do I have to paste this zimage file in my sd card? 9/3/2011 There was a rare condition when the SD card appeared sooner than the internal flash at boot - resulting the "No init found" error in kernel. The reason that the sdhci interfaces was not stricly assigned to an mmc device - the first sdhci was the mmc0. This is corrected now, so the s3c-sdhci.1 is the mmc0, .2 is the mmc1 and so on. The corresponding kernel ( svn version 100): zImage
Guest xcavs Posted March 27, 2011 Report Posted March 27, 2011 Which keymapping do you use? Post #4674, also confirm that with these keylayout there is no freeze on my phone. :D
Guest kgp700 Posted March 27, 2011 Report Posted March 27, 2011 (edited) Neok OMNIA2 Android Beta2 Pack Ver3.2 Turbo & Smooth it's based on beta2 Optimized Performance and stable DVM Library - arm11 JIT DVM ver8.13 for spica (8Mflops) 2D/3D Driver - Mix ver3(fix) for spica(smooth and little faster 3D Games) Modules - dpram.ko(beta1),multipdp.ko(optimized for korea omnia2), s3c-camera.ko(lastest), libertaspi.ko(March-18-2011,17kb) , other modules - lastest modules(March-19-2011) cpu clock - conservative, LCD ON - 133Mhz,800Mhz sleep- 133Mhz,266Mhz only working camera preview on default cammera app but using "Aspect Camera" app it's possible take picture(640x480) but quality bad (battery drain amazing super super fast, sometimes 40% down per 1second) warning it's optimized for korea omnia2 do not use included zImage(kernel) â–¼Use this zImage(kernel) on i8000 http://o2droid.phj.hu/kernel_19032011.zip Download Neok OMNIA2 Android Beta2 Pack Ver3.2 Turbo & Smooth - http://www.multiupload.com/R1NYGHA1W8 Edited March 27, 2011 by kgp700
Guest adaze Posted March 27, 2011 Report Posted March 27, 2011 I'm sure I've already read this somewhere before, but does anyone else find that the battery profile doesn't match (1903 update). Just booted up Android, WM at 50% battery, Android 29%.....
Guest mishatir Posted March 27, 2011 Report Posted March 27, 2011 How do I get the root permission? chmod 6755 su (Setting the SUID/SGID bits: Giving a program YOUR permissions when it runs)
Guest generalekamikaze Posted March 27, 2011 Report Posted March 27, 2011 Neok OMNIA2 Android Beta2 Pack Ver3.2 Turbo & Smooth Optimized Performance and stable DVM Library - arm11 JIT DVM ver8.13 for spica (8Mflops) 2D/3D Driver - Mix ver3(fix) for spica(smooth and little faster 3D Games) Modules - dpram.ko(beta1),multipdp.ko(optimized for korea omnia2), s3c-camera.ko(lastest), libertaspi.ko(March-18-2011,17kb) , other modules - lastest modules(March-19-2011) cpu clock - conservative, LCD ON - 133Mhz,800Mhz sleep- 133Mhz,266Mhz only working camera preview warning it's optimized for korea omnia2 do not use included zImage(kernel) â–¼Use this zImage(kernel) on i8000 http://o2droid.phj.hu/kernel_19032011.zip Download Neok OMNIA2 Android Beta2 Pack Ver3.2 Turbo & Smooth - http://www.multiupload.com/R1NYGHA1W8 How can i remove the "optimized for korea"??? What are this optimized?
Guest kgp700 Posted March 27, 2011 Report Posted March 27, 2011 How can i remove the "optimized for korea"??? What are this optimized? that settings on system/build.prop persist.sys.timezone=Asia/Seoul persist.sys.language=ko persist.sys.country=KR ro.product.locale.region=KR ro.product.locale.language=ko ro.com.android.dateformat=yyyy-MM-dd ro.com.google.clientidbase.am=android-skt-kr
Guest longsin Posted March 27, 2011 Report Posted March 27, 2011 that settings on system/build.prop persist.sys.timezone=Asia/Seoul persist.sys.language=ko persist.sys.country=KR ro.product.locale.region=KR ro.product.locale.language=ko ro.com.android.dateformat=yyyy-MM-dd ro.com.google.clientidbase.am=android-skt-kr cannot download! cannot connect
Guest kgp700 Posted March 27, 2011 Report Posted March 27, 2011 (edited) this picture is ... take picture using " Aspect Camera " app on my omnia2 android pack ver3.2 support only 640x480 and quality bad Edited March 27, 2011 by kgp700
Guest generalekamikaze Posted March 27, 2011 Report Posted March 27, 2011 Modules - dpram.ko(beta1),multipdp.ko(optimized for korea omnia2), And, What about this? I can use another pack of modules for europe?
Guest kgp700 Posted March 27, 2011 Report Posted March 27, 2011 (edited) cannot download! cannot connect many people download this package in korea i think that overload try again And, What about this? I can use another pack of modules for europe? that modules normally working on europe i8000 but maybe 3g is not working correctly (multipdp.ko) i don't know that Edited March 27, 2011 by kgp700
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now