Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 will use the small update and report for info, away from external power source, wake up proved impossible, looks like the battery saving setting is affecting the µSD card...and since the system runs from it....
Guest alexovy Posted March 31, 2011 Report Posted March 31, 2011 Hello, my files "o2b2update.tar.gz" are not updating anymore. Does anybody know how can I fix this back? Thank you!
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 (edited) Guys, i have a situation. I made my partition to ext4 and android boot's perfectly. The only side effect that i'm facing right now is that, android keeps on showing SDCard Removed. I'm not sure why... any solution's to this issue or do i need to change the init.rc?? Edited March 31, 2011 by ashburn
Guest n4m3less Posted March 31, 2011 Report Posted March 31, 2011 This version is only for korea phone? or can be be used on european version ? EXT4 + FS (kpg700/neok_om2android_beta2p_ver32stts) + kernel 1903 (for European Omnia 2) => file image fs.iso 1) download http://www.multiupload.com/FPZ86ULH0T (200M) 2) unpack iso_kor.rar (500M) to Storage Card : \Storage Card\iso\fs.iso \Storage Card\iso\haret.exe \Storage Card\iso\sd.cpio.gz \Storage Card\iso\default.txt \Storage Card\iso\zImage 3) Start \Storage Card\iso\haret.exe OR 2) unpack iso_kor.rar to My Storage : \My Storage\iso\fs.iso \My Storage\iso\haret.exe \My Storage\iso\default.txt \My Storage\iso\zImage 3) download sd0.cpio.gz 4) copy sd0.cpio.gz to \My Storage\iso\sd.cpio.gz 5) change in \My Storage\iso\default.txt : Set initrd sd.cpio.gz to Set initrd sd0.cpio.gz 6) Start \My Storage\iso\haret.exe good luck! P.S. For change fs.iso from Linux: ( if set in phone "USB FLASH MODE" connect phone to PC mount phone to /mnt/sd0 then: ) #losetup /dev/loop6 /mnt/sd0/iso/fs.iso #fsck /dev/loop6 #mkdir /sd3 #mount /dev/loop6 /sd3 ........ change ........ #umount /sd3 #losetup -d /dev/loop6 #umount /mnt/sd0
Guest mishatir Posted March 31, 2011 Report Posted March 31, 2011 (edited) This version is only for korea phone? or can be be used on european version ? This version is only for european version phone! --------------- http://www.multiupload.com/W6DCD9DMLM for MyStorage. Edited April 1, 2011 by mishatir
Guest carlospaco Posted March 31, 2011 Report Posted March 31, 2011 (edited) Hey guys , i have tried to install spb shel 3d, it's finally out. But if i start it op i get error" your video system do not support spb shell 3d" . I think i need something like open gles 2. Is this possible to install it on android 2.1 on my omnia. Thanks Edit: I have managed to start it up with stu drivers, only the names and writing aren't that good but the icons are fin, i wanted to know is ther some better 3d drivers? Thanks Edited March 31, 2011 by carlospaco
Guest demy94 Posted March 31, 2011 Report Posted March 31, 2011 obtain ip address from ..... and unsucceful. I have tried with other but nothing. I have restart the phone and connection work with windows mobile why?
Guest felalex Posted March 31, 2011 Report Posted March 31, 2011 obtain ip address from ..... and unsucceful. I have tried with other but nothing. I have restart the phone and connection work with windows mobile why? Happens for me too from time to time. I have to click connect 3-4 times in a row (one right after the other) to get it connect to a WEP secured network, because otherwise it either doesn't try to connect at all or fails to get an IP. Don't know if it will work for you too...
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 (edited) anyone has a solution for this? i tried editing init.rc i still cant get it working. Installed ext4 Edited March 31, 2011 by ashburn
Guest demy94 Posted March 31, 2011 Report Posted March 31, 2011 (edited) obtain ip address from ..... and unsucceful. I have tried with other but nothing. I have restart the phone and connection work with windows mobile why? Happens for me too from time to time. I have to click connect 3-4 times in a row (one right after the other) to get it connect to a WEP secured network, because otherwise it either doesn't try to connect at all or fails to get an IP. Don't know if it will work for you too... does not work. anyone has any other solutions? Edited March 31, 2011 by demy94
Guest sam7128 Posted March 31, 2011 Report Posted March 31, 2011 sorry, this fs.iso make for users 4pda.ru key cube - BACK key camera - MENU key back - HOME key power - POWER ---------- change (root explorer) in qwerty.kl key 26 LEFT_BRACKET to key 26 ENDCALL WAKE -------- see keylayout from kernel_19032011 Thanks, it work great (in stall in my storage card). With root explorer, I can change key as per your suggestion. :D To be able to change time zone, I have put o2b2update.sh from 08-02-11 in the root (same location as system folder). Have to change number from 1 to 0 in sh file. Then execute it from root explorer. Reset, you can change time zone after that. All other update can do by using root explorer.
Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 anyone has a solution for this? i tried editing init.rc i still cant get it working. Installed ext4 an update file has been posted on the previous page, correcting that issue. New question, does this version run completely from the ISO folder we copy, or does it create its own linux partition? I ask, because I would try to use the "my memory" version to see if the wakeup issue exists too
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 (edited) an update file has been posted on the previous page, correcting that issue. New question, does this version run completely from the ISO folder we copy, or does it create its own linux partition? I ask, because I would try to use the "my memory" version to see if the wakeup issue exists too i'm did a manual install, directly from ubuntu using gparted to make partitions. It's not from the ISO folder. I'm using dev original files & mix 3D file. i'll try the updated file see if anything works.. Edit: It's not working. Edited March 31, 2011 by ashburn
Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 i'm did a manual install, directly from ubuntu using gparted to make partitions. It's not from the ISO folder. I'm using dev original files & mix 3D file. i'll try the updated file see if anything works.. Edit: It's not working. well in that case I would suggest you to do as explained, not any manual thing, then use the updated file, as this works liek a charm, as long as you are connected to an external power source
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 (edited) well in that case I would suggest you to do as explained, not any manual thing, then use the updated file, as this works liek a charm, as long as you are connected to an external power source don't mind me asking... did you just only replace sd.cpio.gz or did you replace it and do a completed reinstall of android? Edited March 31, 2011 by ashburn
Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 don't mind me asking... did you just only replace sd.cpio.gz or did you replace it and do a completed reinstall of android? only replaced that sd.cpio.gz file before, system behaved as if no sd card was there, although system was running from it, now I can see files
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 so you used the fs.iso method... which is with kpg700/neok_om2android_beta2p_ver32stts am i right?
Guest adaze Posted March 31, 2011 Report Posted March 31, 2011 (edited) I've been running the Beta2 (19.03 - 1GB) update, which pretty much has been fine save the battery drain. Today tried to download 2 apps from the market, but they never downloaded or installed, just disappeared. Tried a reboot and now freezing on: []EXT2-fs warning: mounting unchecked root device... []EXT2-fs mounting unchecked fs, running e2fsck is recommended []Freeing init memory: 140K []BFS CPU scheduler v0.310 by Con Kolivas []EXT2-fs error (device mmcblk1p2): ext2_checl_page: bad entry in directory #2 : inode out of bounds - offset=0, inode=3795845132, rec_len=152, name_len=144 []Warning : unable to open initial console. []Failed to execute /init. Attempting defaults... []Kernel panic - not syncing: No init found. Try passing init= option to kernel Then freeze.... Any ideas, or is it a reinstall?! Before this every time I started Android I was getting a warning on the "Android" logo screen *#9900# dump log or something similar. Only difference it seemed to make was the the Anrdoid logo didn't "glow" whilst loading... EDIT: Dump txt available HERE if it is any use to the devs.... Edited March 31, 2011 by adaze
Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 so you used the fs.iso method... which is with kpg700/neok_om2android_beta2p_ver32stts am i right? completely right sir
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 completely right sir okay thanks. I'll try and see the different between Beta 2 and The korean version.
Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 okay thanks. I'll try and see the different between Beta 2 and The korean version. beta 2 stuff is ANdroid 2.1 Eclair the korean stuff or so called is Android 2.3 Froyo....
Guest demy94 Posted March 31, 2011 Report Posted March 31, 2011 obtain ip address from ..... and unsucceful. I have tried with other but nothing. I have restart the phone and connection work with windows mobile why?
Guest avantgarde280 Posted March 31, 2011 Report Posted March 31, 2011 beta 2 stuff is ANdroid 2.1 Eclair the korean stuff or so called is Android 2.3 Froyo.... android 2.3 Froyo??? B) Funniest answer... :D
Guest ashburn Posted March 31, 2011 Report Posted March 31, 2011 (edited) android 2.3 Froyo??? B) Funniest answer... :D lol's maybe his confused with the theme... its not 2.3 nor its froyo. It's still eclair. ;) edit: omg! it's so pressurizing, no matter what i do i still have the SDCard Removed. Insert A New One. I Tried a different sdcard also and i still have this issue.. even when to ext3 to see if it works or not and its kill me. [cause it does not work.] Yet SDCARD shows on windows Mobile & even as an external storage on a computer. Edited March 31, 2011 by ashburn
Guest sony tuckson Posted March 31, 2011 Report Posted March 31, 2011 my bad.....now I feel stupid....
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now