Guest _JT Posted June 24, 2011 Report Posted June 24, 2011 While using a different sd card I still get this: Used this guide: http://www.modaco.com/content-page/322429/...011/page/2040/# Only cant do this: then, type this "cd /media/disk" [ii] then, type this "cd bin" [iii]then, type this "rm -f su" [iv] then, type type "ln -s /media/disk/system/xbin/su" ----> (EDITED) It can't find /bin even though ls /media/disk shows it's there. Could it have something to do with this? Or does anyone have an idea? Otherwise I'm gonna give up, must have spent at least 10-15 hours trying to get it to work :)
Guest alabama20 Posted June 25, 2011 Report Posted June 25, 2011 While using a different sd card I still get this: Used this guide: http://www.modaco.com/content-page/322429/...011/page/2040/# Only cant do this: then, type this "cd /media/disk" [ii] then, type this "cd bin" [iii]then, type this "rm -f su" [iv] then, type type "ln -s /media/disk/system/xbin/su" ----> (EDITED) It can't find /bin even though ls /media/disk shows it's there. Could it have something to do with this? Or does anyone have an idea? Otherwise I'm gonna give up, must have spent at least 10-15 hours trying to get it to work :) The only missing things according to the picture are 2D/3D drivers!!! Put them there where you have haret.exe and you're done
Guest voyteckst Posted June 25, 2011 Report Posted June 25, 2011 The only missing things according to the picture are 2D/3D drivers!!! Put them there where you have haret.exe and you're done It's not 2d/3d drivers but no ext partition. He didn't follow steps from guide (it's mounting vfat partition instead of ext2/4). Check haret settings and check if partition exists.
Guest alabama20 Posted June 25, 2011 Report Posted June 25, 2011 It's not 2d/3d drivers but no ext partition. He didn't follow steps from guide (it's mounting vfat partition instead of ext2/4). Check haret settings and check if partition exists. for me this error appeared when i dont put the 2d/3d driver to the haret.exe
Guest voyteckst Posted June 25, 2011 Report Posted June 25, 2011 (edited) for me this error appeared when i dont put the 2d/3d driver to the haret.exe It's kernel panic, because init program was not found. For 2d/3d lack there is another error. Edited June 25, 2011 by voyteckst
Guest alabama20 Posted June 25, 2011 Report Posted June 25, 2011 It's kernel panic, because init program was not found. For 2d/3d lack there is another error. But when the drivers are missing then it writes this same error message "Kernel panic - not syncing..."
Guest voyteckst Posted June 25, 2011 Report Posted June 25, 2011 But when the drivers are missing then it writes this same error message "Kernel panic - not syncing..." Read whole screen ;-)
Guest alabama20 Posted June 25, 2011 Report Posted June 25, 2011 Read whole screen ;-) Voytekst on what are you working now on froyo? I'm a bit curious :)
Guest PuCiNhOOO Posted June 25, 2011 Report Posted June 25, 2011 (edited) Voytekst, do you think that wold be possible to create a full ROM for this Android to Omnia2? If that could be true, I would mantain the phone. if you think not, I think that I would start to think about the new N9 from Nokia ... It's Awesome, and Meego wold be capable of support all android aplications :) What do you think? Edited June 25, 2011 by PuCiNhOOO
Guest sambosat Posted June 25, 2011 Report Posted June 25, 2011 Voytekst, do you think that wold be possible to create a full ROM for this Android to Omnia2? If that could be true, I would mantain the phone. if you think not, I think that I would start to think about the new N9 from Nokia ... It's Awesome, and Meego wold be capable of support all android aplications :) What do you think? I'm with you on this and actually the DEVs are keeping me from spending money that I do not have and I like the phone but hate samsung support. I have faith in the Devs since they reached this point I doubt that they can't do it
Guest sykim Posted June 25, 2011 Report Posted June 25, 2011 (edited) You have to use our libsec-ril.so, because it's patched for Omnia 2. Have You copied all neccesary binaries (like efsd, ipctool etc.)? Additionally enable logging to level 8 (on the begining of init.rc) and logging (uncomment dd and adb lines in initr.rc). Read logs - this should hep a lot. PS. Galaxy S has totally different hardware... thanks a lot. I will try it and reply too. =============== I attemped your advice but not worked. I edit init.rc in logging to level 8 but i can't find log file. What can i see log file? What phone+wifi linked files or setup init? Please details explane. Edited June 26, 2011 by sykim
Guest Thor2 Posted June 26, 2011 Report Posted June 26, 2011 The project died? When it leaves the 2.3? ...they forgive me for my bad english…
Guest voyteckst Posted June 26, 2011 Report Posted June 26, 2011 thanks a lot. I will try it and reply too. =============== I attemped your advice but not worked. I edit init.rc in logging to level 8 but i can't find log file. What can i see log file? What phone+wifi linked files or setup init? Please details explane. sykim, if You don't understand why You don't have logs I just can't help You. If You don't know where los are, that means, that You didn't read init.rc file. There are lines showing that logs are in the root ("/") and are named logcat.log and kernel.log. In these logs will be written many important things. PS. I assume that You have linux knowledge and know how it works. If You just unpacked (or even compiled) gingerbread it isn't enough.
Guest sykim Posted June 26, 2011 Report Posted June 26, 2011 (edited) sykim, if You don't understand why You don't have logs I just can't help You. If You don't know where los are, that means, that You didn't read init.rc file. There are lines showing that logs are in the root ("/") and are named logcat.log and kernel.log. In these logs will be written many important things. PS. I assume that You have linux knowledge and know how it works. If You just unpacked (or even compiled) gingerbread it isn't enough. Thanks a lot your advice. I 'm cofusing. I mixed froyo + ginger bread but not work wifi+phone. Please download my files and then test. My files linked site is ginger test ==>http://www.megaupload.com/?d=41YFTQE6 Perfect used froyo file linked ==>http://pds.dreamx.com/NPViewPds.asp?fileSeq=285425 http://www.megaupload.com/?d=Y0ZZXXJU I failed get logs file. ==> log viewer apps install but not work. I guess not rooting phone. Edited June 26, 2011 by sykim
Guest Yce Posted June 26, 2011 Report Posted June 26, 2011 @Devs I've noticed that when I phone, my ears warm up a bit, while when I phone in windows it doesnt happen. By the way, anyone noticed this too?
Guest Sinistersky Posted June 26, 2011 Report Posted June 26, 2011 (edited) @Devs I've noticed that when I phone, my ears warm up a bit, while when I phone in windows it doesnt happen. By the way, anyone noticed this too? yea... :) it's kinnda old news actually B) Edited June 26, 2011 by Sinistersky
Guest voyteckst Posted June 26, 2011 Report Posted June 26, 2011 Thanks a lot your advice. I 'm cofusing. I mixed froyo + ginger bread but not work wifi+phone. Please download my files and then test. My files linked site is ginger test ==>http://www.megaupload.com/?d=41YFTQE6 Perfect used froyo file linked ==>http://pds.dreamx.com/NPViewPds.asp?fileSeq=285425 http://www.megaupload.com/?d=Y0ZZXXJU I failed get logs file. ==> log viewer apps install but not work. I guess not rooting phone. Are You using froyo's init.rc? If not look at it and search logging lines.
Guest sykim Posted June 26, 2011 Report Posted June 26, 2011 Are You using froyo's init.rc? If not look at it and search logging lines. Hi.~! Thanks a lot. Are You using froyo's init.rc? ==> No. I test ginger init.rc. I not found logging lines. But i used debugger apps and i saved error files. ===================================== W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2242): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 72 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2244): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 74 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2246): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) I/LogViewer( 2195): [log.LogCatThread] LogCatThread stop success. W/InputManagerService( 1862): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@406d2eb0 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 81 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 70 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2250): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/KeyCharacterMap( 2195): Can't open keycharmap file W/KeyCharacterMap( 2195): Error loading keycharmap file '/system/usr/keychars/s3c-keypad.kcm.bin'. hw.keyboards.0.devname='s3c-keypad' W/KeyCharacterMap( 2195): Using default keymap: /system/usr/keychars/qwerty.kcm.bin W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/IInputConnectionWrapper( 2195): showStatusIcon on inactive InputConnection I/LogViewer( 2195): [log.LogCatThread] LogCatThread stop success. I/Process ( 1862): Sending signal. PID: 2195 SIG: 9 W/libdbus ( 2251): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/libdbus ( 2252): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/ActivityManager( 1862): Activity destroy timeout for HistoryRecord{405ae508 ukzzang.android.app.logviewer/.act.MainAct} W/libdbus ( 2253): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 87 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) I/CPUTuner( 2038): Millies to switch profile: 122 W/libdbus ( 2256): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/KeyCharacterMap( 1934): Can't open keycharmap file W/KeyCharacterMap( 1934): Error loading keycharmap file '/system/usr/keychars/s3c-keypad.kcm.bin'. hw.keyboards.0.devname='s3c-keypad' W/KeyCharacterMap( 1934): Using default keymap: /system/usr/keychars/qwerty.kcm.bin W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) I/dalvikvm( 1862): Jit: resizing JitTable from 1024 to 2048 D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 79 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2258): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 71 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2260): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/libdbus ( 2261): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 69 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2263): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) I/ActivityManager( 1862): Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=de.softxperience.android.nedebug/.LogcatActivity } from pid 1934 I/ActivityManager( 1862): Start proc de.softxperience.android.nedebug for activity de.softxperience.android.nedebug/.LogcatActivity: pid=2264 uid=10039 gids={1007, 1015} D/installd( 1807): DexInv: --- BEGIN '/system/app/de.softxperience.android.nedebug-1.apk' --- D/installd( 1807): DexInv: --- END '/system/app/de.softxperience.android.nedebug-1.apk' (success) --- W/WindowManager( 1862): Rebuild removed 3 windows but added 2 W/libdbus ( 2276): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied I/ActivityManager( 1862): Displayed de.softxperience.android.nedebug/.LogcatActivity: +5s26ms W/copybit ( 1862): stretch_copybit::render == NULL I/dalvikvm( 2264): Jit: resizing JitTable from 512 to 1024 E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2277): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2278): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2279): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/libdbus ( 2280): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2281): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2282): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2283): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 97 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 102 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2286): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 141 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2288): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 196 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2290): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/dalvikvm( 2264): Jit: resizing JitTable from 1024 to 2048 I/CPUTuner( 2038): Millies to switch profile: 161 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 172 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2293): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 96 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2295): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/libdbus ( 2296): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 165 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) D/CPUTuner( 2038): BatteryReceiver got intent: android.intent.action.BATTERY_CHANGED D/CPUTuner( 2038): Battery Level Remaining: 79% I/CPUTuner( 2038): Millies to switch profile: 149 W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) W/libdbus ( 2299): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied W/copybit ( 1862): stretch_copybit::render == NULL E/libagl ( 1862): copybit failed (Unknown error: -22) ======================================== W/libdbus ( 2295): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied ==> I edit permission /etc/dbus.conf but nothing state. I will try it..
Guest voyteckst Posted June 27, 2011 Report Posted June 27, 2011 Hi.~! Thanks a lot. Are You using froyo's init.rc? ==> No. I test ginger init.rc. I not found logging lines. But i used debugger apps and i saved error files. ===================================== ............ ======================================== W/libdbus ( 2295): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied ==> I edit permission /etc/dbus.conf but nothing state. I will try it.. First of all: do You have enabled rilcorrect service(set property)? Second: Just add lines with logging to Your init.rc - kernel logs are needed.
Guest sykim Posted June 27, 2011 Report Posted June 27, 2011 First of all: do You have enabled rilcorrect service(set property)? Second: Just add lines with logging to Your init.rc - kernel logs are needed. Thanks a lot interest my question..I shamed not enough english and technical knowledge. I will try your advice and reply. Have a good day ~!
Guest alabama20 Posted June 27, 2011 Report Posted June 27, 2011 Thanks a lot interest my question..I shamed not enough english and technical knowledge. I will try your advice and reply. Have a good day ~! sykim your bluetooth is working on froyo?
Guest sykim Posted June 27, 2011 Report Posted June 27, 2011 sykim your bluetooth is working on froyo? Sorry. I 'm not used Bluetooth product. My foryo edition is link http://pds.dreamx.com/NPViewPds.asp?fileSeq=285425 http://www.megaupload.com/?d=Y0ZZXXJU
Guest AnYhOw Posted June 28, 2011 Report Posted June 28, 2011 Sorry. I 'm not used Bluetooth product. My foryo edition is link http://pds.dreamx.com/NPViewPds.asp?fileSeq=285425 http://www.megaupload.com/?d=Y0ZZXXJU Hi, do you did any speed optimize on your Foryo rom? Or any changes between the Foryo rom from the developer? Thanks.
Guest myo2wantandroid Posted June 28, 2011 Report Posted June 28, 2011 Hey guys I have searched for the Froyo Iso now more than 8 hours. I cant find it :)( Please give me a link for the Froyo iso and everything that is needed for a iso install. Please help me, you are my last hope (dont know if thats english xD) Thank you very much regards mo2wa
Guest Ngage Posted June 28, 2011 Report Posted June 28, 2011 Sorry. I 'm not used Bluetooth product. My foryo edition is link http://pds.dreamx.com/NPViewPds.asp?fileSeq=285425 http://www.megaupload.com/?d=Y0ZZXXJU Hi Sykim! Your Froyo is good, but is not corect with power changer. In normal mode without power changer, it show connected power changer. when I connect changer to Omnia2, it show disconnect changer. Fix this, please.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now