Jump to content

[STOPPED] CyanogenMod Beta2 Omnia 2 (updated: 04.05.2012)


Guest voyteckst
 Share

Recommended Posts

Guest MinaseTaki

guys here is my full startup


Set kernel zImage

Set ramsize 180*1024*1024

Set mtype 1626

Set ramaddr 0x50000000

Set kernelcrc 1

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p2 init=/init"

boot

this time i did install it on My Storage but same problem pink screen a few seconds after that it just reboot...

any idea ? i did try the whole night to make it work ....

and i have the right zImage 2.43MB

Edited by MinaseTaki
Link to comment
Share on other sites

Guest hirophang

dunno i am really so damn stupid or what...

after 12 hours of try, still pink screen......

can anyone who successed, teach me how to install....

i have no ubuntu, can manual install using window only?

Edited by hirophang
Link to comment
Share on other sites

Guest voyteckst

I can not access the contents of My Storage Storage at home when I open / storage.

Is there any way to do it?

If You changed default partitioning layout, where My Storage was on partition 5, You have to change its number in /init.rc file (line with mounting of /storage.

Link to comment
Share on other sites

If You changed default partitioning layout, where My Storage was on partition 5, You have to change its number in /init.rc file (line with mounting of /storage.

Ok ... voyteckst I do this later ... thanks! B)

Just one question: is this Froyo is rooted?

Edited by Thor2
Link to comment
Share on other sites

setbitp 0x7F008808 5 1

pfw 0x7f005800 4 0x3

pfw 0x7f005804 4 0x805

pfw 0x7f005808 4 0x7

pfw 0x7f00580c 4 0x0

pfw 0x7f005828 4 0x11

pfw 0x7f00582c 4 0x80

I guess this isnt necessary, running Android properly without this SETBITB in my startup file.

About Wifi, works fine but if internet dont work you have to set IP to static and add a gateway as well. Right after internet wont work again, so you just have to disable the Static IP. Working fine now.

Hi

if You do not know what are these why posting nonsense?

if You do not know what are these why posting nonsense?

These lines are needed very much.

We use serial console and these sets the the chip parameters.

And this sets the clocks before booting linux.

Without these the phone can be unstable and freeze when you connect usb

Sandor

developer

Link to comment
Share on other sites

Guest roboreaper

My method

1. download the ubuntu iso and burn as cd

2. Boot up the computer with the CD using the Try mode (live CD)

3. Use a card reader to read my micro sd card

4. system> administration > GParted Partition Editor

5.Find my sd card driver on the right top corner

6. Delete all partition of the sd card (there is normally two partition in the sd card if you installed froyo beta 1 before with the installer)

7. Create a new partiton by right click > new> fat 32> enter the size of your sd card - 1000MB >"disk0"

8. create another partition by right click > new>ext4> size 1000mb>label "disk"

9. click the "tick" above and wait for the computer to finish

10. Go to desktop , click "examples" > find ur downloaded froyo beta2 zip

11. extract all the files inside on the desktop

12. click applications>accessories>terminal

13. type in cd Desktop

14. type in "sudo tar zxvf ext4.tar.gz -C /media/disk "

15. wait until process finished

16.check from the explorer to see if there are files copied into "disk" that is ur sd card

17. plugin the sd card back to ur phone

18. copy haret.exe +startup.txt+zimage into my storage

19. edit the startup.txt to mmcblk0p2

20. Start haret!!

(for me the first boot is failed, but 2nd boot is success , maybe same to you :D)

ok i tried to follow these instructions but when i do step 14 it says:

allot of times permission denied........ cannot create mk dir. allot

Link to comment
Share on other sites

Guest voyteckst

Hi

if You do not know what are these why posting nonsense?

if You do not know what are these why posting nonsense?

These lines are needed very much.

We use serial console and these sets the the chip parameters.

And this sets the clocks before booting linux.

Without these the phone can be unstable and freeze when you connect usb

Sandor

developer

According to Sandor's response - please all read first post. You should only change root device.

Link to comment
Share on other sites

Guest nikkotsoi

ok i tried to follow these instructions but when i do step 14 it says:

allot of times permission denied........ cannot create mk dir. allot

have you mount your disk?

Link to comment
Share on other sites

Guest thanh_nha0706

Hi everyone,

I have just installed the Froyo beta 2, I will let you know how it be after using it few days.

And once again, thank the team very much for this new beta. :))

Link to comment
Share on other sites

Hi , i instally beta2 in my storage ,but it ran from the pink screen in less then 1 minute to black and nothing happened later ,then i had to pull out the battery,anyone have the same problem or knows why? Thanks

And my startup.txt is as below:

Set kernel zImage

Set ramsize 180*1024*1024

Set mtype 1626

Set ramaddr 0x50000000

Set kernelcrc 1

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p2 init=/init console=ttySAC2,115200"

setbitp 0x7F008808 5 1

pfw 0x7f005800 4 0x3

pfw 0x7f005804 4 0x805

pfw 0x7f005808 4 0x7

pfw 0x7f00580c 4 0x0

pfw 0x7f005828 4 0x11

pfw 0x7f00582c 4 0x80

boot

Link to comment
Share on other sites

Guest Extremegmx

We are using this froyo version and kernel daily, there are no SOD's and freezes...

Does it matter how big the ext4 partition is ?(which one should I use, 1gb or 2gb?) Thanks!

Link to comment
Share on other sites

Guest voyteckst

how did you do that, with the beta1 installer?

Theoretically it can work, but it won't create ext4 partition, only ext2. But it creates also wrong startup.txt.

First post updated with testing kernel with enabled screen display (ONLY FOR TESTING what's wrong).

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.