[STOPPED] CyanogenMod Beta2 Omnia 2 (updated: 04.05.2012)

[Guest nikkotsoi]

Use the one inside the zip, first time i use the other one and i have the Android logo loading and loading

mine got loading for 10 seconds and it stopped moving :(:(:(:(

[Guest pessoa]

Geez! You guys write faaast! LOL!

Sooo... my partition on linux is /dev/sdd7...

So, it should be mmcblk1p7, right?

[Guest bsbsbs]

Guys If You install it to sd card you must have 2 partitions on it

the 1st must be vfat

the 2nd ext4

in this case the default.txt must have this line

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init console=ttySAC2,115200"

Sandor

The pink screen must not be there more than 30 sec.

Edited September 17, 2011 by bsbsbs

[Guest r1c4rd0]

My Wifi dont work :S

my wifi is not working too...

[Guest rom_omnia2]

Use the one inside the zip, first time i use the other one and i have the Android logo loading and loading

That happened, until my battery falls.

I'm charging the battery to try again later. Thanks!

.

DEVS! Take off that link of ZIMAGE below Note2.

[Guest pessoa]

fdisk returns:

Disco /dev/sda: 160.0 GB, 160041885696 bytes

255 heads, 63 sectors/track, 19457 cylinders

Unidades = cilindros de 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Identificador do disco: 0x0004774b

Dispositivo Boot Início Fim Blocos Id Sistema

/dev/sda1 * 1 19457 156286976 7 HPFS ou NTFS

Disco /dev/sdb: 500.1 GB, 500107862016 bytes

255 heads, 63 sectors/track, 60801 cylinders

Unidades = cilindros de 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Identificador do disco: 0x000c7094

Dispositivo Boot Início Fim Blocos Id Sistema

/dev/sdb1 1 60801 488384001 83 Linux

Disco /dev/sdc: 160.0 GB, 160041885696 bytes

255 heads, 63 sectors/track, 19457 cylinders

Unidades = cilindros de 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Identificador do disco: 0x000b13c1

Dispositivo Boot Início Fim Blocos Id Sistema

/dev/sdc1 * 1 1302 10458283+ 83 Linux

/dev/sdc2 1303 19317 144705487+ 83 Linux

/dev/sdc3 19318 19457 1124550 82 Linux swap / Solaris

Disco /dev/sdd: 8220 MB, 8220835840 bytes

1 heads, 62 sectors/track, 258972 cylinders

Unidades = cilindros de 62 * 512 = 31744 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Identificador do disco: 0x00066b90

Dispositivo Boot Início Fim Blocos Id Sistema

/dev/sdd1 1 258973 8028159+ 5 Estendida

A partição 1 não termina no limite do cilindro.

/dev/sdd5 1 207939 6446079 b W95 FAT32

/dev/sdd6 242061 258973 524286+ b W95 FAT32

/dev/sdd7 207968 241868 1050931 83 Linux

Partições lógicas fora da ordem do disco

Sorry it's portuguese... but, anyway... as I said, the ext4 is /dev/sdd7...

[Guest nikkotsoi]

Geez! You guys write faaast! LOL!

Sooo... my partition on linux is /dev/sdd7...

So, it should be mmcblk1p7, right?

is ur partition in my storage?

If YES, u are right

If it is in the sd card.

it should be mmcblk0p7

[Guest Ngage]

From zip package.

If You have problems, remember to set correctly mmcblk device!

Thank you Voyteckts!

First boot:

1, Pink screen: less than 1 minute

2, boot with logo ANDROID cc 5 minute

3, seting for startup less than 1 minute,

4,time is correctly

5, Thank you DEV. TEAM

6, Trying to install apps

[Guest roboreaper]

... ok so i dont get the instructions at alll

you have to manually create a partition on your SD or my storage? to Exfat?

and i dont understand step 1. Mount Your ext4 partition...

and do you need linux to get it installed... if so.. just great........<_<

[Guest nikkotsoi]

ya

after the first time i saw the android logo, it got freezed some time.

On my second try, i am successful and trying the new android ! thx :lol::lol:

[Guest rom_omnia2]

fdisk returns:

Disco /dev/sdd: 8220 MB, 8220835840 bytes

/dev/sdd1 1 258973 8028159+ 5 Estendida

/dev/sdd5 1 207939 6446079 b W95 FAT32

/dev/sdd6 242061 258973 524286+ b W95 FAT32

/dev/sdd7 207968 241868 1050931 83 Linux

If sdd is your SDCARD then your startup should be:

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p7 init=/init"

Or else it's My Storage:

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p7 init=/init"

.

Try it, i may be wrong.

Edited September 17, 2011 by rom_omnia2

[Guest pessoa]

If sdd is your SDCARD then your startup should be:

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p7 init=/init"

Or else it's My Storage:

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p7 init=/init"

.

Try it, i may be wrong.

Thnks, mate!!!

I'm on "ANDROID" screen now!!! Taking some time, but, i think it's going forward... it blinked black about 3 times so far, it supposed to be like that? The logo never stopped "moving", though...

[Guest grlrv]

My WiFi doesn't work too

[Guest rom_omnia2]

... ok so i dont get the instructions at alll

you have to manually create a partition on your SD or my storage? to Exfat?

and i dont understand step 1. Mount Your ext4 partition...

and do you need linux to get it installed... if so.. just great........<_<

If you don't have a Linux then you will have wait for the installer.

Or you can use some froyo bundle like this one:

Just use the new beta froyo package.

[Guest rom_omnia2]

Thnks, mate!!!

I'm on "ANDROID" screen now!!! Taking some time, but, i think it's going forward... it blinked black about 3 times so far, it supposed to be like that? The logo never stopped "moving", though...

What ZImage are you using?

You have to use the ZIMAGE inside ZIP package.

That Zimage out of zip file DOES NOT WORK

[Guest pessoa]

I'm timing it... Every 3min or so, my "ANDROID" screen flashes black and doesn't go forward...

Anyone else getting this? Should I try again or let the thing does it's thing?

[Guest pessoa]

What ZImage are you using?

You have to use the ZIMAGE inside ZIP package.

That Zimage out of zip file DOES NOT WORK

I'm using the zImage from the zip package....

Wondering if it is a part-like kind of problem...?

[Guest rom_omnia2]

I'm using the zImage from the zip package....

Wondering if it is a part-like kind of problem...?

Dude, i'm in the same page.

I'm using the zimage from zip package but still, can't get out of Android logo loading. I'm going to reboot and try again.

[Guest pessoa]

Dude, i'm in the same page.

I'm using the zimage from zip package but still, can't get out of Android logo loading. I'm going to reboot and try again.

Did you tryied the zImage OUT of the package too?

I think i'm going to try the one that is out of the package... starting the become a matter of faith... lol

[Guest rom_omnia2]

Did you tryied the zImage OUT of the package too?

I think i'm going to try the one that is out of the package... starting the become a matter of faith... lol

Yes, i was using that one and Android Logo Loading won't leave.

I thought that zimage was the problem, but now with the zimage from zip file the problem still.

[Guest pessoa]

Yes, i was using that one and Android Logo Loading won't leave.

I thought that zimage was the problem, but now with the zimage from zip file the problem still.

Ok, so, I'm out of ideas...

Anyway to see a debug screen instead of the Logo screen?

[Guest Ngage]

My WiFi doesn't work too

+1

[Guest dabiz]

Mines doesn't seem to work anyway... I'm sure I'm setting right the partition but still stuck on pink screen...

[Guest alabama20]

my wifi is not working too...

Did you solved the problem?!

[Guest Ngage]

Yes, i was using that one and Android Logo Loading won't leave.

I thought that zimage was the problem, but now with the zimage from zip file the problem still.

Try to format partition to ext3, I solved this problem with beta1.