[STOPPED] CyanogenMod Beta2 Omnia 2 (updated: 04.05.2012)

[Guest andylau]

Me too.. check my sdcard partition using easeus partition manager on Windows there is 3,9Gb space unlocated (on my SDCARD), buts its not big problem, just resizing the active partition one.

Problems on my phone:

1.Dont know why but some apps hv a problem when i tried to open it (to slow, working but dont open completely, pop up force close/wait)

2.My Camera dont work.. it always crash then the rotation sensor not work too (after camera crash)..

Sorry for my bad english..

队列中有移动 /dev/sdb1 分区的起始扇区的操作。

Failure to boot is most likely to occur if you move the GNU/Linux partition containing /boot, or if you move the Windows system partition C:.

您可以在 GParted FAQ 中学习如何修复启动配置。

http://gparted.org/faq.php

Moving a partition might take a very long time to apply.

sorry i cant translate all of the above into english, it comes out when i move/resize the fat32 partition, will it affect my android that i have to install again?

1. maybe the the size of app you use is just too big and require more ram or something like that

2.the camera and rotation sensor both worked for me well

sorry for my english too

edit: it doesn't matters, after resize i can alsoboot into android succefully, thank you

Edited October 19, 2011 by andylau

[Guest MinaseTaki]

for those with partition problem (END?) format the card from winmo and it will work ;) hope it helps

[Guest vidavi]

for those with partition problem (END?) format the card from winmo and it will work ;) hope it helps

For me didnt work. I found another workaround. I used my other android phone, unmounted sd card and then format it. This way i managed to gain all partitions, and then worked

[Guest crusssader]

for all who have problem with missing partition on sd card ...use Paragon partition manager and you will see all size of sd cart ... just delete litle partiton and create one new with full size of the card

[Guest vmosc]

All you need for an Internal Storage Install, let the Automatik-Installer make the Partition's, also the first Step (...go into beta 2 Folder...).Start Ubuntu to unpack the System Folder (ext4.tar.gz) on ext2 partion from Internal Storage. Don't forgett to root, 'cause dosn't the Atomatik-Installer. And than start Haret from My Storage, done. Maybe you must Format the SD-Card to use it.

How can you root???

[Guest peyman_omnia2]

anybody can slove arabic font problem?

[Guest MinaseTaki]

1 question because our screen isn't multi touch we cant resize the screen on angry birds ,right?

[Guest malavin]

How can you root???

Someone has post a way under ubuntu with the Console. Can't find the thread but here are the commands:

type without "-"

-cd /media/disk/system/bin

-sudo rm -rf su

-sudo ln -s /media/disk/system/xbin/su

-sudo chmod 6755 /media/disk/system/xbin/su

disk is the Partition Name from Beta3 Filesystem. If you have another Laber, than you have to replace that

Edited October 19, 2011 by malavin

[Guest ALBERJ]

Did a clean install of beta 3. Used to get around 30-35 hours running 2G only on beta 2. This beta is similar to beta 1 in that I'm finding it warms up more than usual and battery life is closer to 10 hours.Try to change to 2G but finding it difficult. Finding it difficult to switch to 2G. Anyone else? But at least 3G works this time.

I Like beta1 to change from 2G to 3G or 3G to 2G only works if I connected to the wifi internet. Imagine how it uses the same way that the beta2 phone as there the same problem. Otherwise everything seems to work well in both 2G and 3G, 2G uses less battery.

This notice something beta3 the slower manual even though I installed the 128 internal memory and swap left....

traducido google de español a ingeles

Yo igual que en beta1 para poder cambiar de 2G a 3G o de 3G a 2G solo me funciona si esta el Wifi conectado a internet. Imagino que como utiliza la misma manera de telefono que la beta2 pues existe el mismo problema. Por lo demás todo parece funcionar bien, tanto en 2G como en 3G, en 2G gasta menos batería.

Esta beta3 la noto algo mas lenta aunque la he instalado manual en la memoria interna y dejado 128 de swap.

Edited October 19, 2011 by ALBERJ

[Guest con73]

Hello.

I have a problem with sending MMS in beta3. MMS composition goes well but when you press the send status all the time I send.MMS never arrives. The operator Orange Poland. Internet APN and MMS are in the system.

Do you have any idea what to do?

[Guest riku89]

i can install properly but there is some error on launching a scrip file ..default.txt i wonder what is that .

and also there is a thing message , start waiting for connection on port 9999, when u connect , you will get a remote hardware examination tools.. if i press listen for network connection . it just run withouting showing anything

there is a display , found machine M900

[Guest longsin]

do the start.txt of B3 be same as B2? I installed B3 with ubuntu ,only used ext4, and zImage,When i open UC ,often appear that memory is not enough?

[Guest PuCiNhOOO]

Yes, just mantain the startup.txt from b2 and it will be alright...

After that You need to create swap

[Guest Nexere]

damn i was halfway through running the automatic installer when i saw the big "DON'T USE AUTOMATIC INTERNAL STORAGE INSTALLER" message on the site :( can this be installed manually ?

Edited October 19, 2011 by Nexere

[Guest voyteckst]

Yes, just mantain the startup.txt from b2 and it will be alright...

After that You need to create swap

And add correct entry in /etc/fstab

[Guest wlw6600]

And add correct entry in /etc/fstab

Thanks a lot for you strive,

I'm very excited in this achievement,

unfortunately,B3's camera unexpected stop as B2,only B1's camera can run once after reset .

Edited October 19, 2011 by wlw6600

[Guest enriquedopico]

I Like beta1 to change from 2G to 3G or 3G to 2G only works if I connected to the wifi internet. Imagine how it uses the same way that the beta2 phone as there the same problem. Otherwise everything seems to work well in both 2G and 3G, 2G uses less battery.

This notice something beta3 the slower manual even though I installed the 128 internal memory and swap left....

traducido google de español a ingeles

Yo igual que en beta1 para poder cambiar de 2G a 3G o de 3G a 2G solo me funciona si esta el Wifi conectado a internet. Imagino que como utiliza la misma manera de telefono que la beta2 pues existe el mismo problema. Por lo demás todo parece funcionar bien, tanto en 2G como en 3G, en 2G gasta menos batería.

Esta beta3 la noto algo mas lenta aunque la he instalado manual en la memoria interna y dejado 128 de swap.

Esto es lo que yo preguntaba desde ayer. Lo único que me hace falta es saber en que posición y de que tamaño ha de ser la partición SWAP.

Yo creo que no te está funcionando el SWAP debido a que no está la partición en la posición correcta (posición que desconozco todavía jaja)

Si te está funcionando el SWAP, unos mensajes más atrás decía voyteckst como comprobarlo.

Como hiciste el update?

Extrayendo el tar.gz con linux y metiendo los updates y el zImage en My Storage o metiendo TODO en My Storage y dejando que lo hiciera??

Saludos

Is possible update from beta2 to beta3 if is now installed in My Storage through manual install??

-Backup

-Copy zImage, frb2update.tar.gz and frb2update.sh in My Storage

-Create addicional partition????

Maybe??

Regards

Edited October 19, 2011 by enriquedopico

[Guest katokato]

Beta3 complete installation on SD:

Phone :OK

Data (3G HDSP ...) :OK

WiFi : OK

BT: OK

MMS: OK

Voice command : OK

Rotation : OK

Sim application : OK (!!! MANY THANKS)

Camera : OK

Lags : more than b2.

SWAP memory: I don't know how to check

Free Mem : 35

MANY MANY THANKS TO DEV TEAM

Edited October 19, 2011 by katokato

[Guest PuCiNhOOO]

Esto es lo que yo preguntaba desde ayer. Lo único que me hace falta es saber en que posición y de que tamaño ha de ser la partición SWAP.

Yo creo que no te está funcionando el SWAP debido a que no está la partición en la posición correcta (posición que desconozco todavía jaja)

Si te está funcionando el SWAP, unos mensajes más atrás decía voyteckst como comprobarlo.

Como hiciste el update?

Extrayendo el tar.gz con linux y metiendo los updates y el zImage en My Storage o metiendo TODO en My Storage y dejando que lo hiciera??

Saludos

Is possible update from beta2 to beta3 if is now installed in My Storage through manual install??

-Backup

-Copy zImage, frb2update.tar.gz and frb2update.sh in My Storage

-Create addicional partition????

Maybe??

Regards

It may be possible, but you will need ubuntu, and also to use the terminal in android ... you need some knowledge ...

[Guest finacho]

1 - Realize auto installation (before the announcement of bug), and is too slow and lag

2 - The battery drains extremely fast

3 - Work 3G and phone signal

4 - The camera quality is still low

Great work also!

PS: The beta2 were more fluent

[Guest harrypotter222]

quick feedback on beta3

-cleaned up beta2 install on custom partitioned mystorage (using minitool partition)

-used auto-installer to install on SD

bluetooth works beautifully , stereo works on my bt headset, listening to music while using 3G data radio for web browsing.

This is the first time I can utilize this phone under android OS on the road!

Amazing. Used it heavily for one hour, battery down to 83%, not bad at all. Considering BT and 3G in use for an hour.

SDCARD mount point works out of the box now, angry birds doesn't have white squares and looks smoother than before.

Only minor thing, not sure if it's the default music player or my own BT hardware, sometimes the BT seems to try hard to "ensure connection", occasionally it jitters, then the music will have a lower tone gradually (like fading out), then it slowly resume correct tone in a few seconds. Will try different hardware/software so see if it behaves the same way.

[Guest enriquedopico]

It may be possible, but you will need ubuntu, and also to use the terminal in android ... you need some knowledge ...

OK, but, HOW??

Only copy three update files

or

extract + copy .sh and zImage

THEN

What kind of partition and where position for swap in?

Regards

[Guest rom_omnia2]

Beta3 complete installation on SD:

[...]

Rotation : OK

[...]

MANY MANY THANKS TO DEV TEAM

Here it switch to landscape mode (ok, Rotation works), but does not back to portrait mode.

PS: About camera, it's working better now (thanks to better 3D performance). But is it normal video recording unable to enable flash?

Edited October 19, 2011 by rom_omnia2

[Guest carlospaco]

After working with beta 3 for a few hours, seems quite good.

Angry birds graphics are good, no white boxes, 3g and wifi also good.

Calling ok

But i have one time that android was asking my pin code, it was restart or something.

Does anybody know of experience same thing

£Sorry for my english.

Thanks

[Guest ASMARTTECHIE]

Thanks yet again to all Dev's for this wonderful release!

No complaints at all ..

All that has been said.. works fine !

Thanks again !

{{{ btw, I used the automatic installer on sd card 2gb.. everything went fine.. - for those getting YES/NO error... clean reformat ur card properly or even jus leave it unallocated rather than maikng it a fat32 or any other thing.. it'll work fine! }}}