[STOPPED] CyanogenMod Beta2 Omnia 2 (updated: 04.05.2012)

[Guest andylau]

my phone freeze and cant boot into android again(comes out phone and system forse close), now i format my storage and sdcard to reinstall, but it says cant mount internal stoarge? my storage is logical partition

[Guest ggwfnh]

I have no SD card, my STORAGE is the primary partition, how to install???

I will try to sd.cpio.gz unpack. Edit the init will change from mmcblk1 to mmcblk0

Failure

Edited October 20, 2011 by ggwfnh

[Guest Job21]

my phone freeze and cant boot into android again(comes out phone and system forse close), now i format my storage and sdcard to reinstall, but it says cant mount internal stoarge? my storage is logical partition

please check if the storage is of 1st / 2nd logical partition

the installation is base on an untouched storage which is 1st logical partition (mmcblk1p5)

[Guest lzq55555]

I'm using it daily (bsbsbs also does). Memory is enough for normal light usage.

This version seems to get rid of automatic memory management " tweak.sh", will need to add it ?

[Guest thanh_nha0706]

my problem is:

in first level of install when i choose androidinstall.exe this error display to me:

"mounting dev/block/mmcblk1p5 on sd card faild ; No such device or address

cant mount internal flash!!!!!!"

pls help me.....

(sorry for my bad english!)

I think you have to use your phone to format your SD card (make sure your phone recognize SD card normally). Put all the files that you downloaded to the root of My storage and then run autoinstall again. I just tried once and succeeded.

I have no SD card, my STORAGE is the primary partition, how to install???

So you have to wait until the My Storage Installation released...

[Guest finacho]

This beta 3 is very lag ! anyone has the same problem? it is impossible to use...lag, freeze , fast batery drain...

[Guest ggwfnh]

My storage is primarg partition ,Not SD Card .

I don't change to logical partition，How to install?

[Guest andylau]

please check if the storage is of 1st / 2nd logical partition

the installation is base on an untouched storage which is 1st logical partition (mmcblk1p5)

how about the sdcard? primary partition?

this time it comes out:

error: Partition doesn't exist

parted: invalid option -1

parted: invalid option -3

parted: invalid option -6

......

tune2fs: No such file or directory while trying to open /dev/block/mmcblk0p

Couldn't find valid filesystem superblock.

e2fsck: No such file or directory while trying to open /dev/block/mmcblk0p

End?

edit: it is OK now

so i think beta3 require my storage with logical partition 1st and sdcard primary partition as default :rolleyes:

hope this time it didnt freeze anymore

maybe i should get myself a better scard, this 8G one is so slowly

Edited October 20, 2011 by andylau

[Guest Gardakkan]

I successfully installed Beta 3 on my i8000 (my storage), I find it a bit clunky but I haven't finished configuring it all yet so we'll see. The swap partition (linux-swap) definitely works since right now it says 23mb used when I type free in terminal emulator. Angry birds is awesome now though, but still sound cuts off when there is some big animations, but hey its a 3 year old phone its just amazing that it runs android :)

USB for sharing data definitely doesn't work for me when booted in android (i tried on linux and win7) so I'm stuck with using SwiFTP server to transfer files to my phone.

It's weird that I don't see my phone number in the status page anymore but the phone works well. I'm hoping the devs will have some fixes soon for the USB. But its funny that last time I had the some problem with USB but plugged it at work on a XP pc and it worked on win7 when i got home. I'll try it again tomorrow when I get to work.

[Guest erikcas]

FINALLY! For 2 days trying I can get Android on my O2! Sweet! Almost apps works fine! Thx! Really thx for @PuCiNhOOO his do the hard working loosing all day try to fix my MyStorage (all problem its there). Thx for @antonio junior that give me some tips, thx to @Voyteckst to make the installer, and for other Devs! Thx guys!

I will be back soon! (now its time to use some Android)

Enjoy!

[Guest maxlilt]

I don't like beta3, it much slowly compared to b2! I would prefer to get memory back or apply microphone fix to beta2.

Update: with installer I have better performance. First time upgrade been used...

Edited October 20, 2011 by maxlilt

[Guest ASIDER]

This beta 3 is very lag ! anyone has the same problem? it is impossible to use...lag, freeze , fast batery drain...

yes :(:unsure::huh:

Edited October 20, 2011 by ASIDER

[Guest voyteckst]

yes :(:unsure::huh:

No, for me works fine.

Comparing to beta2, beta3 has only less ram (beside working BT, fixed microphones, phone etc.). Practically no changes to filesystem, so it simply can't be slow. If You have slow SD card, it will be slow.

And believe me: I'm not using any other version than You.

Edited October 20, 2011 by voyteckst

[Guest Job21]

I don't like beta3, it much slowly compared to b2! I would prefer to get memory back or apply microphone fix to beta2.

yes :(:unsure::huh:

No, for me works fine.

Comparing to beta2, beta3 has only less ram (beside working BT, fixed microphones, phone etc.). Practically no changes to filesystem, so it simply can't be slow. If You have slow SD card, it will be slow.

And believe me: I'm not using any other version than You.

guys, try to follow the guide. In beta 3, if you have the swap space properly mounted, it should go good (B2 as well)

And I don't believe dev team will build some good while ruining the existing

Only slight reminder: battery drain is serious (comparatively), probably becoz of the wifi fix?

Edited October 20, 2011 by Job21

[Guest con73]

Hello.

I installed the program from the market Swapper. The program detects the FAT on the SD card. I create the new 200MB swap partition.Reboot the system. swapper runs when booting the system and activates the new created partition swap. The result is a significant acceleration in my system and other applications like Andry birds.

Thanks for the dev.

Edited October 20, 2011 by con73

[Guest enriquedopico]

guys, try to follow the guide. In beta 3, if you have the swap space properly mounted, it should go good (B2 as well)

And I don't believe dev team will build some good while ruining the existing

Only slight reminder: battery drain is serious (comparatively), probably becoz of the wifi fix?

Which is default kind and size of swap partition?? ext4, ext3 ??? 128Mb ???

I only need to know this!!! jeje

Thanks

[Guest Job21]

Which is default kind and size of swap partition?? ext4, ext3 ??? 128Mb ???

I only need to know this!!! jeje

Thanks

my setting

swappiness: 30

size: 200mb ( I choose swap partition instead of just a swap file, hopefully to control the damage within certain sector of the SD)

how to? pls read ur prev. post of last page. con73 was sharing minutes ago

Edited October 20, 2011 by Job21

[Guest enriquedopico]

my setting

swappiness: 30

size: 200mb ( I choose swap partition instead of just a swap file, hopefully to control the damage within certain sector of the SD)

how to? pls read ur prev. post of last page. con73 was sharing minutes ago

I already knew how do. I only needed kind and size of swap partition.

Thanks!!

[Guest voyteckst]

Hello.

I installed the program from the market Swapper. The program detects the FAT on the SD card. I create the new 200MB swap partition.Reboot the system. swapper runs when booting the system and activates the new created partition swap. The result is a significant acceleration in my system and other applications like Andry birds.

Thanks for the dev.

You do not need any app for swap...

--------------------------------------------------------------------

And one more thing... Sorry, but if installer don't work and no one will test it, I just will not repair it, because I don't have time for testing such things. Someone declared that will test my corrections and now, it's working for him, so no testing... It just don't work like that. I'm really disappointed with that...

Edited October 20, 2011 by voyteckst

[Guest vidavi]

You do not need any app for swap...

--------------------------------------------------------------------

And one more thing... Sorry, but if installer don't work and no one will test it, I just will not repair it, because I don't have time for testing such things. Someone declared that will test my corrections and now, it's working for him, so no testing... It just don't work like that. I'm really disappointed with that...

You dont have to be dissapointed, here there are so many people watching this thread, that you can hear so many opinions. I am one of them that dont have so much knowledge of linux, but i keep googling to find answers. From beta2 i use everyday, it has a few lags but its ok. In my opinion as i am not interested in games i think memory should focus to run android without lag and not for 3d. I think you can consider 2 versions as many people dont use Omnia for gaming.

[Guest carlospaco]

You do not need any app for swap...

--------------------------------------------------------------------

And one more thing... Sorry, but if installer don't work and no one will test it, I just will not repair it, because I don't have time for testing such things. Someone declared that will test my corrections and now, it's working for him, so no testing... It just don't work like that. I'm really disappointed with that...

Hello , xan someone then explane how and what is swap? And how we install it or something like that?

I have android beta 3 on sd 2gig and it works like a charm , but i do need meer ram memory, and i think that swap will do this.

THANKS

[Guest PuCiNhOOO]

I've made a fresh instalation of beta3 to MyStorage, and I'm amazed ...

The RAM is ok, the phone work awesomly, the batery drain is amazing! (all night on sleep, and it changes from 79% to 79%, Yes, it didn't loose any batery during the sleep mode, in 2g.

Since I've no used the autoinstall the unique thing that is not so ok, is the swapper ... I'll create an swap partition on SDCard, with ext4 format, and will be doing new point =)

Thanks a lot devs ;)

[Guest katokato]

Hi master! i'm here ready to test what you wont. I dont' understand how check it swap exist and works but...

You do not need any app for swap...

--------------------------------------------------------------------

And one more thing... Sorry, but if installer don't work and no one will test it, I just will not repair it, because I don't have time for testing such things. Someone declared that will test my corrections and now, it's working for him, so no testing... It just don't work like that. I'm really disappointed with that...

[Guest peyman_omnia2]

mr voyteckst you can slove this problem?

in first level of install when i choose androidinstall.exe this error display to me:

"mounting dev/block/mmcblk1p5 on sd card faild ; No such device or address

cant mount internal flash!!!!!!"

partition is correct(fat32 primary)

this is very important problem plz answer

Edited October 20, 2011 by peyman_omnia2

[Guest Job21]

mr voyteckst you can slove this problem?

in first level of install when i choose androidinstall.exe this error display to me:

"mounting dev/block/mmcblk1p5 on sd card faild ; No such device or address

cant mount internal flash!!!!!!"

partition is correct(fat32 primary)

this is very important problem plz answer

partition code was wrong

if SD is inserted when installing

SD card = mmcblk0

storage = mmcblk1

partition code: primary p1,p2,p3 / logical p5,p6,p7