[STOPPED] CyanogenMod Beta2 Omnia 2 (updated: 04.05.2012)

[Guest voyteckst]

My Storage

My storage normally starts with partition 5 which is FAT. So probably it will be 6 or 7 for You not 2.

[Guest rom_omnia2]

My Storage

Device Boot Start End Blocks Id System

/dev/sdc1 1 808 6490228+ b W95 FAT32

/dev/sdc2 809 999 1534207+ f W95 Ext'd (LBA)

/dev/sdc5 809 999 1534176 83 Linux

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p5 init=/init"

[Guest nikkotsoi]

the market is responding so fast!

the G sensor have no more delay

great!:lol:

however , i can connect to a wifi but can get internet access?:blink:

[Guest bsbsbs]

the command line must have the console too!!!!!!!!!!!!!

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init console=ttySAC2,115200"

Sandor developer

[Guest erikcas]

the command line must have the console too!!!!!!!!!!!!!

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init console=ttySAC2,115200"

Sandor developer

Sandor,

what is the extra console option for?

[Guest nikkotsoi]

installed on mystorage with ext4 and everything works fine including wifi

but after using it for couple of minutes, the phone gets so sloooooooooow

i'll try to figure out the solution to this problem...

thx devs for your hard work!

edit: the problem was the market. it takes about 16M memory. but even with market turned off, it only leaves me with around 20M memory...

with advanced task killer + switchpro+glass clock+ mort music player (playing mp3 with speaker)

i have 53 mb left :blink:

[Guest r1c4rd0]

my wifi internet is now working, after i enable the network data and roaming services, really strange... then i could disable that and wifi is working normal.

guys try it please

Edited September 17, 2011 by r1c4rd0

[Guest haebinlim]

with advanced task killer + switchpro+glass clock+ mort music player (playing mp3 with speaker)

i have 53 mb left :blink:

dang y do i only get 20mb of memory left... i'm gonna try restarting couple of times.

im already using ATK tho

[Guest Thor2]

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p5 init=/init"

Is still pink on the screen ...

What else should I try? :blink:

Edited September 17, 2011 by Thor2

[Guest bsbsbs]

Sandor,

what is the extra console option for?

we have serial console configured in kernel, (thats why pink screen) , if you have serial cable you can see the bootlog,

and the hw must be setup properly

some guy said about freezing when connected usb, this can be the cause

My default.txt look like this

Set kernel zImage

Set ramsize 128*1024*1024

Set mtype 1626

Set ramaddr 0x50000000

Set kernelcrc 1

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init console=ttySAC2,115200"

setbitp 0x7F008808 5 1

pfw 0x7f005800 4 0x3

pfw 0x7f005804 4 0x805

pfw 0x7f005808 4 0x7

pfw 0x7f00580c 4 0x0

pfw 0x7f005828 4 0x11

pfw 0x7f00582c 4 0x80

boot

The console is in the same line as Set CMDLINE

sandor

Edited September 17, 2011 by bsbsbs

[Guest voyteckst]

with advanced task killer + switchpro+glass clock+ mort music player (playing mp3 with speaker)

i have 53 mb left :blink:

Don't use advanced task killer. It has enabled script for that.

[Guest rom_omnia2]

First Sleep Of Death after plugging my phone to PC so it can be charged. It was already in sleep mode when plugged in. Is that normal?

I was free of SOD in the previous version, i'd installed "Advance Task Killer" and set to Kill every service and app before sleep.

If it goes to sleep with many apps and services running, it will freezes, isn't a froyo problem, it's a memory problem, or processor problem. Omnia II Hardware.

I may be wrong, just sharing the experience that i had.

[Guest nikkotsoi]

Don't use advanced task killer. It has enabled script for that.

what do u mean enabled script?

so any suggestions ?

thanks :)

[Guest alabama20]

my wifi internet is now working, after i enable the network data and roaming services, really strange... then i could disable that and wifi is working normal.

guys try it please

For me this isn't working :(

[Guest rom_omnia2]

My Storage

Device Boot Start End Blocks Id System

/dev/sdc1 1 808 6490228+ b W95 FAT32

/dev/sdc2 809 999 1534207+ f W95 Ext'd (LBA)

/dev/sdc5 809 999 1534176 83 Linux

Set CMDLINE "rootdelay=2 root=/dev/mmcblk1p5 init=/init"

Is still pink on the screen ...

What else should I try? :blink:

Damn, i may be wrong. Hard to know...

Read the comment #203

Edited September 17, 2011 by rom_omnia2

[Guest bsbsbs]

Task killer is not needed Please do not use any.

[Guest rom_omnia2]

the command line must have the console too!!!!!!!!!!!!!

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init console=ttySAC2,115200"

Sandor developer

Some one want to try explain this? :unsure:

Edited September 17, 2011 by rom_omnia2

[Guest erikcas]

we have serial console configured in kernel, (thats why pink screen) , if you have serial cable you can see the bootlog,

and the hw must be setup properly

some guy said about freezing when connected usb, this can be the cause

My default.txt look like this

Set kernel zImage

Set ramsize 128*1024*1024

Set mtype 1626

Set ramaddr 0x50000000

Set kernelcrc 1

setbitp 0x7F008808 5 1

pfw 0x7f005800 4 0x3

pfw 0x7f005804 4 0x805

pfw 0x7f005808 4 0x7

pfw 0x7f00580c 4 0x0

pfw 0x7f005828 4 0x11

pfw 0x7f00582c 4 0x80

boot

sandor

Oke.

Without the extra option I don't get passed "pink screen" when on USB, while I get passed without the option.

On B7610, phonepart isn't loaded and sensors not working. In notificationbar I see airplane mode thumbnail, while the airplane mode is OFF according to settings.

Could this be B7610-hardware related?

[Guest nikkotsoi]

very strange

i can connect to wifi

i can go to the router config page (192.168.1.1) but i can't go to the internet

it must not be the router 's problem since i am using the notebook with wifi on it

i am sure i have never sleep the phone since booted

hope it can be solved

[Guest voyteckst]

very strange

i can connect to wifi

i can go to the router config page (192.168.1.1) but i can't go to the internet

it must not be the router 's problem since i am using the notebook with wifi on it

i am sure i have never sleep the phone since booted

hope it can be solved

Don't know why, but I had it on one of routers. It's DNS not set.

[Guest bsbsbs]

we have serial console configured in kernel, (thats why pink screen) , if you have serial cable you can see the bootlog,

and the hw must be setup properly

some guy said about freezing when connected usb, this can be the cause

My default.txt look like this

Set kernel zImage

Set ramsize 128*1024*1024

Set mtype 1626

Set ramaddr 0x50000000

Set kernelcrc 1

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init console=ttySAC2,115200"

setbitp 0x7F008808 5 1

pfw 0x7f005800 4 0x3

pfw 0x7f005804 4 0x805

pfw 0x7f005808 4 0x7

pfw 0x7f00580c 4 0x0

pfw 0x7f005828 4 0x11

pfw 0x7f00582c 4 0x80

boot

The console is in the same line as Set CMDLINE

sandor

this is the correct one

[Guest bsbsbs]

Oke.

Without the extra option I don't get passed "pink screen" when on USB, while I get passed without the option.

On B7610, phonepart isn't loaded and sensors not working. In notificationbar I see airplane mode thumbnail, while the airplane mode is OFF according to settings.

Could this be B7610-hardware related?

this is not for B7610, it has diferent hardware

[Guest alabama20]

Don't use advanced task killer. It has enabled script for that.

Wojtek i made the adb debug so i'll test the wifi :)

[Guest pessoa]

ok, but, what about the logo screen issue...

Any chance of figuring out why I'm stuck on the ANDROID Logo screen?

[Guest voyteckst]

this is the correct one

First post updated with that.