Jump to content

[ICS] [CM9] [4.0.4] ColdFusionX for the ZTE Skate [ROM] [UPDATED - 28/06]


Recommended Posts

Guest Skate Away
Posted

No. it will install a version 4.014 or so of CWM recovery

Thanks !!

14 mins until Gapps finishes downloading :)

Guest e.miron
Posted (edited)

14 mins until Gapps finishes downloading :)

Am I crazy or am I the only one on this forum actually using a PC?.

Dear Lord, earlier was one with 17 hours of download or so, now you, c'mon people, get real. If I have to wait 17 hours to download a file of 100 mb I'll go nuts long before it finishes. ( even on dial-up it's faster)

Are there no PC available whatsoever?

I downloaded every version on CM9 in under 2 minutes, installed it in 10 and ready to fly in another 10.

Nowadays a pc is not that expensive , people.

Edited by e.miron
Guest trueno2k
Posted
Am I crazy or am I the only one on this forum actually using a PC?.

Dear Lord, earlier was one with 17 hours of download or so, now you, c'mon people, get real. If I have to wait 17 hours to download a file of 100 mb I'll go nuts long before it finishes. ( even on dial-up it's faster)

Are there no PC available whatsoever?

I downloaded every version on CM9 in under 2 minutes, installed it in 10 and ready to fly in another 10.

Nowadays a pc is not that expensive , people.

I'm with you there, I always use my PC for downloading roms and rom modifications, you just can't do half the stuff that you can do on PC with a smartphone!... PC FTW completely! :P
Guest Skate Away
Posted (edited)

Am I crazy or am I the only one on this forum actually using a PC?.

Dear Lord, earlier was one with 17 hours of download or so, now you, c'mon people, get real. If I have to wait 17 hours to download a file of 100 mb I'll go nuts long before it finishes. ( even on dial-up it's faster)

Are there no PC available whatsoever?

I downloaded every version on CM9 in under 2 minutes, installed it in 10 and ready to fly in another 10.

Nowadays a pc is not that expensive , people.

That's on my PC !!

With a good net connection too.

:)

Edit: I'm pretty sure it's down to the file sharing site...

Edited by Skate Away
Guest jtharmor
Posted

roaming evrytime have to select network manually once network is lost. phone does nt register automatically once back in coverage.

Posted

i already use the new 150512 build few dsys, so far so good.

every thing work fine, no problem in this rom.

but, i have 2 questions, may be you can solve it.

1. this is use very fast & smooth, but sometimes the reaction a little delay, usually after sleep, when make up phone.

is normal ? or i need set up someting? (overclock 245~940, used app2sd )

2. here is no wifi ap function, right ? i used wireless tether still no used.

has any way can make the phone to be wifi ap to share 3g network for my friends.

thank every, Especially tilal6991 !!

Guest C3C0
Posted

I'm not fussed about the wakelock function whilst plugged into the mains as it doesn't seriously affect the charging much, however it does for when my OMC is plugged into the usb power charging, the screen definitely needs wakelock to shut off when screen is off and plugged into usb power, unless usb power charging is just too weak, then it's something I just have to and can live with anyways... I just like it that when my screen is off whilst I unplug the cable that the screen stays off, it saves me having to turn the screen off myself or waiting for it to turn off by itself...

Looks like this can be changed:

<bool name="config_unplugTurnsOnScreen">true</bool>

Guest cooler11
Posted

i already use the new 150512 build few dsys, so far so good.

every thing work fine, no problem in this rom.

but, i have 2 questions, may be you can solve it.

1. this is use very fast & smooth, but sometimes the reaction a little delay, usually after sleep, when make up phone.

is normal ? or i need set up someting? (overclock 245~940, used app2sd )

2. here is no wifi ap function, right ? i used wireless tether still no used.

has any way can make the phone to be wifi ap to share 3g network for my friends.

thank every, Especially tilal6991 !!

I need wifi tether too!

Guest creedence
Posted
@creedance Using mini tool to create an sd-ext partition doesn't delete everything on the SD card.....are you sure if you create a partition through clockwork mod that it deletes everything?

With mini-tool, not everything is deleted. But even with Clockwork.

Guest Skate Away
Posted

Ok,

I'm attempting to follow the TPT instructions to the letter, only nothing seems to be happening.

1) Download a TPT - I've downloaded 'Skate-v2b.zip' as this one was recommended

2) Check the MD5sum matches - result "Matches expected value"

3) Unzip the TPT - image folder created on SD card containing image.bin & nandroid.md5

4) Check the contents of the image folder - number of matches 1/1

5) Turn off the phone

6) Menu + Vol + Power

7) Green text should appear on the screen then the phone should reboot into recovery

Ok, no 'green text' - the phone just goes straight into recovery.

What should I do ?

Guest e.miron
Posted

Try using a different, smaller sd card. Sometimes tpt does not like a card but likes another

Guest phuang3
Posted

only problem is hq video ;)

Yes, I wish hq video can be fixed, too. I want to watch MKVs.

Guest hugobosslives
Posted

That's on my PC !!

With a good net connection too.

:)

Edit: I'm pretty sure it's down to the file sharing site...

nah thats not the file sharing site. i can download the rom from goo in about a minute

and from mediafire it takes 20 or so seconds

6) Menu + Vol + Power

7) Green text should appear on the screen then the phone should reboot into recovery

Ok, no 'green text' - the phone just goes straight into recovery.

What should I do ?

try the home button instead/aswell. i seem to remember someone saying their skate had a different key combo

Guest Skate Away
Posted

Yes, I wish hq video can be fixed, too. I want to watch MKVs.

Can't you watch MKVs in MX Player ?

Guest trueno2k
Posted
Looks like this can be changed:

<bool name="config_unplugTurnsOnScreen">true</bool>

Am I able to change this setting off within the rom zip, then please can you tell me where this setting is, so I can have screen stay off when I unplug power lead, if not then whenever its possible can you or Lalit sort this out, I'm happy wait for this fix in the next big update...

Cheers...

Guest creedence
Posted

nah thats not the file sharing site. i can download the rom from goo in about a minute

and from mediafire it takes 20 or so seconds

try the home button instead/aswell. i seem to remember someone saying their skate had a different key combo

power + on holding the vol+ and menu buttons

Maybe not the right sequence?

Guest plegdroid
Posted
Am I able to change this setting off within the rom zip, then please can you tell me where this setting is, so I can have screen stay off when I unplug power lead, if not then whenever its possible can you or Lalit sort this out, I'm happy wait for this fix in the next big update...

Cheers...

you'll have to decompile which ever system apk it's in, make the change then recompile the apk again and fire back into system. :)

Guest eLJay
Posted (edited)

What should I do ?

I'd advise first backing up your Contacts and SMS with MobileGo

Which has an app on the phone and an app that sits on your PC.

Then load the ROM onto your sd card.

Make a Backup of your phone in case you need to put it back on.

Next use the 'TPT helper' app, load the second TPT file and run the second option,

it will probably stop your current ROM working.

Then use recovery to load the ROM following the instructions ~(using the buttons when starting the phone).

When all that is done use MobileGo to reload your SMS and Contacts (I did not load the Apps).

This worked for me and meant I didn't have to mess around lots with TPT.

Also all my SMS messages and Contacts went across thanks to MobileGo.

Edited by eLJay
Guest Skate Away
Posted

FLASH ORDER:

  • First: you should get the GAPPs and ROM and put them on your SD card
  • Now FORMAT SYSTEM <- VERY IMPORTANT

Ok,

Again, I realise I'm probably missing something obvious...

Where is 'FORMAT SYSTEM' ?

I can't find it and it's very important....

Guest plegdroid
Posted (edited)

Ok,

Again, I realise I'm probably missing something obvious...

Where is 'FORMAT SYSTEM' ?

I can't find it and it's very important....

cwm storage and mount's

I definitely don't want to come across as being a thread nazi, but

could we please start using the discussion thread for any other ics related issues, like tpt, will this, will that app work, what size partition do I need please ect , iam as guilty as anyone else, for off topic posts O:) so iam not pontificating.

this is a development thread specific for cfx builds, could we please start to use the thread started by tilal for this purpose, :)

@Tilal, could you please edit the topics name to reflect cfx, not iceskater, will stop confusion :)

Edited by plegdroid
Guest plegdroid
Posted

@skate away, that was not specifically aimed at you, I just added it as an edit to your reply. :)

I would have added this to the above post, but tapa is playing up.

Guest Skate Away
Posted

this is a development thread specific for cfx builds, could we please start to use the thread started by tilal for this purpose, :)

http://www.modaco.co...d-for-IceSkater

I confess, I didn't know that thread existed...

:blush:

Guest Skate Away
Posted

cwm storage and mount's

What happens if you don't 'FORMAT SYSTEM' ?

:(

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.