[ROM] <<< Fish'N'Chips 7 >>> [2.3.5]

[Guest Timotei]

will there be an add on for power controlls etc in the notification bar at all, like in previous RLS versions (i think) ?

thanks

[Guest raverrr]

will there be an add on for power controlls etc in the notification bar at all, like in previous RLS versions (i think) ?

thanks

working on it now. With a bit of luck will incluse in next release.

[Guest Hermione01]

If you're asking that then you're probably not overclocked because you have to actually set those values yourself and it sounds like you haven't. If you did want to overclock, or even underclock, then you would use an app like SetCPU or AnTuTu CPU Master

Thanks for this, Just to recap, flash the new RLS 4 ROM, reboot, load a Overclock App, set to 902mhz.reboot and enjoy

[Guest PsYcHoKiLLa]

Thanks for this, Just to recap, flash the new RLS 4 ROM, reboot, load a Overclock App, set to 902mhz.reboot and enjoy

Jobs a good un ;)

Edited March 13, 2012 by PsYcHoKiLLa

[Guest fredoche]

Sorry for my very bad english, french version bottom

With the rls4 sf2 blade S

I've got one time

'partage bluetooth' eating 100% CPU

and one time

'apeller *' eating 100% CPU

But for the upgrade RLS3-> RLS4 i don't do 'wipe data/factory reset', juste wipe cache partition and wipe dalvik cache.

May be it's come from here. So i just do it (wipe data/factory reset")

If, it happen another time, sould i do something for help you debugging ?

---------------------

avec la rls 4 sf2

J'ai eu un coup "partage Bluetooth" qui bouffait 100% du cpu

un coup "appeler *" qui bouffait 100%

par contre entre la rls3 et la rls4 j'ai pas fait une "wipe data/factory reset", juste le cache partition et Dalvik cache

Une chance que ça vienne de la ? Du coup je viens de le faire !

si ça le refait, un truc a faire pour envoyer des infos pour le debug ?

Edited March 14, 2012 by fredoche

[Guest Titas]

There were some problems with bluetooth not working on previous rls so there is a strong possibility that a clean re-flash will solve the problem wipe cache, data/factory reset & Dalvik cache. If you still have the problem (or not!) post the outcome. Bon chance!

[Guest JohnnyZTE]

My freind asked me to do a clean install of RLS 4 on his San fran, I performed a partition first of 512 Meg on a 8gig card same as mine and done it twice now, I cannot get A2SDGUI to activate and put apps on SD card, it keeps going back to Apps on internal storage anybody have any Ideas.

I also wiped everything, Dalvik.

Phone does not have a SIM in it but I cant imagine that would make a difference.

I done the same with my own phone so Im somewhat confused.

What application is included for this in RLS4 and if its included where is it?

[Guest raverrr]

My freind asked me to do a clean install of RLS 4 on his San fran, I performed a partition first of 512 Meg on a 8gig card same as mine and done it twice now, I cannot get A2SDGUI to activate and put apps on SD card, it keeps going back to Apps on internal storage anybody have any Ideas.

I also wiped everything, Dalvik.

Phone does not have a SIM in it but I cant imagine that would make a difference.

I done the same with my own phone so Im somewhat confused.

What application is included for this in RLS4 and if its included where is it?

get darktremor apps to sd from the market. should work.

[Guest JohnnyZTE]

get darktremor apps to sd from the market. should work.

Thats what im using, I think the partition is not mounted, do you know how to mount it?

[Guest fear_hardcore]

Hello, I've got more information for the bluetooth problem :

Here is a log of a typical start and crash of the bluetooth subsystem : Bluetooth log

In short, the problem seem to come from here :

I/InputManager-Callbacks( 277): No input device calibration properties found for device AVRCP.

I hope that this will help you :)

[Guest Titas]

My freind asked me to do a clean install of RLS 4 on his San fran, I performed a partition first of 512 Meg on a 8gig card same as mine and done it twice now, I cannot get A2SDGUI to activate and put apps on SD card, it keeps going back to Apps on internal storage anybody have any Ideas.

I also wiped everything, Dalvik.

Phone does not have a SIM in it but I cant imagine that would make a difference.

I done the same with my own phone so Im somewhat confused.

What application is included for this in RLS4 and if its included where is it?

A2SD is working fine for me (on my TMV) & I guess for others too so it's not likely to be a ROM issue. As you have done this successfully previously I'm not sure I can help but here are a couple of thoughts anyway. A2SD is already in the ROM & provided that there is an ext partition apps should automatically be installed there - it doesn't need to be activated. A2SDGUI shows if apps are on ext or internal & you can move them from one to the other by pressing the button. How did you partition the card? Have you confirmed partition exists (Titanium or Free Space or SD Maid or similar)? Is the partition big enough ( I used 1Gb)? If all that is OK then I would suspect the SD Card itself. The card should be mounted automatically on boot - what makes you think it may not be? Can you read/write from the card?

[Guest fr0do]

I have the same problem. Titanium recognises my 1gb swap partition as a2sd with some data on it.

I presume you didn't wipe the partition between roms. I'm sure I haven't before.

.

Edited March 15, 2012 by fr0do

[Guest Titas]

I have the same problem. Titanium recognises my 1gb swap partition as a2sd with some data on it.

I presume you didn't wipe the partition between roms. I'm sure I haven't before.

.

I didn't wipe the SD card - just usual wipe cache, wipe data/factory reset, wipe Dalvik. A2SD installs APK's on ext partition but app data & Dalvik cache will remain on internal so you will still run out of space eventually. Mine is currently: Internal 170 Mb (48.6Mb free) & A2SD 959Mb (849Mb free).

Presumably you have you tried moving apps to internal memory & then back to ext?

Edited March 15, 2012 by Titas

[Guest fr0do]

That's what I did. Apps won't move back to memory - not enough space. Internal 240mb / 63mb free; SD EXT 914mb / 673mb free ( cache 40mb / 34mb free; ram 431mb / 250mb free).

[Guest Titas]

That's what I did. Apps won't move back to memory - not enough space. Internal 240mb / 63mb free; SD EXT 914mb / 673mb free ( cache 40mb / 34mb free; ram 431mb / 250mb free).

I guess not cos you have 241Mb of apps on your ext partition Your internal memory will mostly be taken up by the data associated with the apps on your SD. The only way to create more space internally is to move Dalvik cache to SD (prob. minimal benefit) or to use one of Amorphas's TPT to re-partition system space to around 160Mb thus freeing up around 40Mb (+ anything gained from reducing cache size) of wasted space. This is fine as long as you don't change to a ROM such as ICS which needs more space than that.

Edited March 15, 2012 by Titas

[Guest fr0do]

Note the 40mb cache ;) :P. I guess I need to temporarily uninstall one or more of these big apps.

[Guest Titas]

Note the 40mb cache ;) :P. I guess I need to temporarily uninstall one or more of these big apps.

lol - yeah - I forgot the easiest option of all!

[Guest Titas]

Hello, I've got more information for the bluetooth problem :

Here is a log of a typical start and crash of the bluetooth subsystem : Bluetooth log

In short, the problem seem to come from here :

I/InputManager-Callbacks( 277): No input device calibration properties found for device AVRCP.

I hope that this will help you :)

I guess this is one for raverr. I'm using the Astro bluetooth module on my TMV & it's working fine

[Guest Josef Prusa]

I guess this is one for raverr. I'm using the Astro bluetooth module on my TMV & it's working fine

But the Bluetooth audio is broken for you as well?

Cheers

[Guest Titas]

The ROM's bluetooth was not connecting so I installed Astro which connects to my hands-free device just fine. I don't use it for audio so can't comment on that.

[Guest Titas]

removed - double post

Edited March 15, 2012 by Titas

[Guest app10336]

The ROM's bluetooth was not connecting so I installed Astro which connects to my hands-free device just fine. I don't use it for audio so can't comment on that.

With SF2 rom

Don't work fine as is (not w/ astro). Bluetooth audio&hands-free device can be paired, but near 100% cpu (when turn off bluetooth, it stay in 100% cpu...)

Other bt need password for pairing, just have strange issue..

(Sorry for my English :þ)

Edited March 15, 2012 by app10336

[Guest yoann54]

Hello,

does google talk vidéo works on this last release ? that could be something great for the blade s i think because he doesnt support skype vidéo and very badly the tango too. Good evening everyones..

Yoann

[Guest wazy]

Raverrr is looking into the Bluetooth issues, hopefully he is able to swap a few files from one of the working stock roms :D

[Guest Reider59]

I got Bluetooth to work once on the SFII using third party software, but nothing since. I tried again today with Astro and others, still nothing. That's using two different Bluetooth gadgets. A poundshop variety and a good quality BT Bluetooth Adaptor. Though I'm not 100% reliant on it I too need Bluetooth working, so let's hope it works in the next version of FnC.

Edited March 16, 2012 by Reider59