[KERNEL] SFR Staraddict kernels for "all" custom roms

[Guest Viento del Sur]

Ok, thx.

[Guest Duchneau]

The first kernel didn't work for me in Atomic Mod :/. I have a "pixel screen" after wake up.

Edited September 29, 2012 by Duchneau

[Guest Youkomi]

Hello, were is the kernel for Cyanogen mod 10. Tank you.

[Guest C3C0]

Kernels updated

Changelog 21/10/2012

- CPU Governors revised

--- fixed Lagfree not scaling below 480MHz

--- fixed conservative stuck at max. frequency

--- fixed SavagedZen not ramping higher than 480MHz

--- ondemand parameters changed to match those ZTE is using in stock ROMs

--- new governor: SmartassH3 - based on SmartassV2 with parameters tuned by H3ROS (thanks) -

more efficient frequency scaling - not ramping too high when not needed this could potentially

result in better battery life

- added compatibility hack for some newer TRULY replacement LCDs

- default governor set to SmartassH3 with default min. frequency 122MHz

- added S4 for Jellybean ROMs

[Guest arocs]

I m checking in zte skate . Only for testing battery consupmtion and new governor testing. I have not staraddict , normal zte skste phone.

C3co , are you going to update your rom with this kernel updates?

Thanks

Edited October 23, 2012 by arocs

[Guest arocs]

Sorry , i should use [KERNEL] S series kernel for "all" custom ROMs and not sfr one.

Thanks

[Guest erator]

I have proximity fail with S4 kernel on CFX2ROM. with s3 kernel everything works. screen does not get dark at the beginning of a call, and if it gets dark it does not wake up to end a call on touchscreen.

S3 kernel does not have this problem.

[Guest C3C0]

How abou calibration. Have you tried it?

[Guest C3C0]

ICS S3 kernels updated for compatibility with native wifi tethering that has been recently fixed in my ParanoidAndroid ICS ROM

[Guest moominot]

Hi all!

after a glass and digitizer crash i purchased a new one and change it. All good in MokeeOS BUT not in Paranoid Android. The digitizer works like a pointer.

How difficult is to put the Mokee configuration on PA? Is it possible? Should I forget to have PA on my skate?

Please, help!

Mokee is cool, but PA is cooler!!!

http://dl.dropbox.com/u/9418650/P1060553.JPG

Here is an image of the logo, maybe it helps

Thank you all

[Guest omegavesko]

Hi all!

after a glass and digitizer crash i purchased a new one and change it. All good in MokeeOS BUT not in Paranoid Android. The digitizer works like a pointer.

How difficult is to put the Mokee configuration on PA? Is it possible? Should I forget to have PA on my skate?

Please, help!

Mokee is cool, but PA is cooler!!!

http://dl.dropbox.com/u/9418650/P1060553.JPG

Here is an image of the logo, maybe it helps

Thank you all

Have you flashed the staraddict kernel?

[Guest C3C0]

Flashing the kernal over PA should do the trick.

Pick SFR in case you have SFR otherwise pick the other one from "S series" kernel thread.

http://www.modaco.com/topic/353434-kernel-s-series-kernel-for-all-custom-roms/

[Guest moominot]

thank you very much, it works.

I already tried with an S kernel, and that did'nt work. I really did'nt see the two potions (S3 and SFR) and I tried one thinking was the other. Anyway, with SFR kernel all is working right.

Thanks, thanks, thanks, thanks, thanks, thanks, thanks, thanks, thanks, thanks, thanks, thanks, thanks, etc...

[Guest moominot]

I've been testing today and find a little error.

It was very difficult to tap the keys on the left hand: when tap the S writes A, etc.

I checked the pointer location in dev tools and saw that in the right part of the screen recognize exactly where I tap, and if I slide to left, the pointer goes faster than my finger. In the left side it is 5mm mismatch aprox.

Any ideas?

Someone else?

[Guest C3C0]

Are you sure your device requires sfr kernel?

Have you tried normal S series one?

[Guest moominot]

Yes, I did

I'll try it again...

[Guest moominot]

I don't know what I did, but now I flashed the S3 kernel and all is ok.

There are misteries in computing...

(offtopic) I was in the point to try CFX2, what differences are with PA, appart of bugs?

Thanks again!

[Guest omegavesko]

I don't know what I did, but now I flashed the S3 kernel and all is ok.

There are misteries in computing...

(offtopic) I was in the point to try CFX2, what differences are with PA, appart of bugs?

Thanks again!

Which PA? Ceco's (4.0) or Lalit's (4.1)?

[Guest C3C0]

CM9 S3 kernels have been updated for compatibility with my today's PA release

[Guest thomas1310]

There will be a coldfusionX 3 kernel version ?

[Guest omegavesko]

See here:

Happy new year to you, too :)

Now I am thinking about that driver... It's not enough to have updated kernel. Some changes are needed at rom level, too (to utilize new driver and enable USB tethering)

So if I update it, it will be compatible with ParanoidJelly only. And ParanoidJelly already contains S4

What makes sense is to update SFR version so SFR users can use it with ParanoidJelly

Sounds like he's considering it.

[Guest thomas1310]

Okay, thanks, we'll see that =)

[Guest C3C0]

S4 updated.

Changelog 10/01/2013

- S4 updated for compatibility with the ParanoidJelly CM10 (and possibly CFX3 CM10.1)

[Guest tilal6991]

Yep it is compatible with CFX3.

[Guest plegdroid]

S4 updated.

Thank You C3CO :)