Guest Miki Bakaiki Posted December 2, 2012 Report Posted December 2, 2012 (edited) with what settings should i config my cpu ? :) Edited December 2, 2012 by Miki Bakaiki
Guest Buffalo Soldier Posted December 2, 2012 Report Posted December 2, 2012 Can anyone confirm that the 3G reboot bug is still present on R5? I have this problem, but not that often, I've noticed it happens more often when my network type is UMTS:3. I think you should try this: It helped some people, but for me it didn't. :( Also some people solved rebooting problem with this kernel: but this only works with stock-based roms. My solution is to keep it on 2G until I need faster connection, like when I'm using TuneIn Radio, so this way I didn't have any reboots for a few weeks now.
Guest popoyaya Posted December 2, 2012 Report Posted December 2, 2012 R5 the fastest yet here with trebuchet. And no reboots yet. I'm getting antutu scores of ~4200. I'm usb tethering with 3G without issue. For those going back to R3 I can only say: muppets!
Guest ovecka Posted December 2, 2012 Report Posted December 2, 2012 I have this problem, but not that often, I've noticed it happens more often when my network type is UMTS:3. I think you should try this: http://www.modaco.co...based-ics-roms/ It helped some people, but for me it didn't. :( Also some people solved rebooting problem with this kernel: http://www.modaco.co...-update-111112/, but this only works with stock-based roms. My solution is to keep it on 2G until I need faster connection, like when I'm using TuneIn Radio, so this way I didn't have any reboots for a few weeks now. Worth trying. I used B944 (At least I think so. Is there a way to get the version from update.app?) as a baseband 2030 source. Too bad I won't get to a 3G zone in a week.
Guest Aurimas L. Posted December 2, 2012 Report Posted December 2, 2012 Proximity sensor has problems... Screen turns off, but not wakes up when making a call... Hmz, tried infusion rom, same problem occurs...
Guest Davidoff59 Posted December 2, 2012 Report Posted December 2, 2012 The proximity sensor was an issue on the blade too and someone made an app to calibrate it. Not sure how we can fix it.
Guest jsevi83 Posted December 2, 2012 Report Posted December 2, 2012 Great work, Daz. Since I think new devices are still being accepted in CM9, I really hope you can make the G300 an official device some day. Thanks for your effort!
Guest grizzlyflea Posted December 2, 2012 Report Posted December 2, 2012 Seriously are you on your phones for all 24 hours of the day? The phone has a battery for a reason so what if it runs out
Guest marcioo Posted December 2, 2012 Report Posted December 2, 2012 You're basically just whining. No accurate description of the issue, just plain crying. Are you going to stop being background noise in this thread? So, if I found an error I cant say in here?
Guest Dazzozo Posted December 2, 2012 Report Posted December 2, 2012 So, if I found an error I cant say in here? Are you going to read what I've said for weeks? If you're going to report an issue report it properly.
Guest BoneyD Posted December 2, 2012 Report Posted December 2, 2012 (edited) Hello all, I did the OTA-type upgrade from R3 to 4, then immediately 5 (I didn't realise you could skip 4 at the time). Now I'm getting randomly dumped out of the browser to the home screen, with no message of any type. On returning to the browser, sometimes it's remembered which page I'm on, sometimes not. It actually happened just now on here if that's useful information? (full web-page view rather than the phone version, which irritatingly doesn't give you page numbers!) I wasn't having any issues with R3 apart from very occasional (presumably 3G) reboots, so I'll just revert to that for now but I'd be interested to hear if it's just me or if this is a problem other people are having. It's still the best rom available by a mile by the way, so thanks - I don't want to sound ungrateful! Edit: in case it's also useful, it seems to happen towards the end of a page loading (rather than on a fully-loaded page). Edited December 2, 2012 by BoneyD
Guest sedj Posted December 2, 2012 Report Posted December 2, 2012 (edited) Been here since the beginning the latest r5 is great no problem here fantastic work m8 :) Maybe if you do the wipes after the OTA you may not have any problems? Edited December 2, 2012 by sedj
Guest D4rius Posted December 2, 2012 Report Posted December 2, 2012 how to install all backup in this rom? Thanks.
Guest sashko69 Posted December 2, 2012 Report Posted December 2, 2012 I think you can't, use GoBackup instead.
Guest nsmacd1 Posted December 2, 2012 Report Posted December 2, 2012 (edited) how to install all backup in this rom? Thanks. Download the zipped version from here and flash using .Zip file installer in ClockworkMod - http://translate.goo...ved=0CD8Q7gEwAQ Edited December 2, 2012 by nsmacd1
Guest JRow Posted December 2, 2012 Report Posted December 2, 2012 how to install all backup in this rom? Thanks. You have to install it as a zip from sd card with cwm.You can download the zip file here http://www.solidfiles.com/d/5255e3a333/ I dont think its advisable to use allbackup if your constantly chopping and changing roms - it can screw up system files. I just use it for backing up my own data,not system or apps
Guest JRow Posted December 2, 2012 Report Posted December 2, 2012 Download the zipped version from here and flash using .Zip file installer in ClockworkMod - http://translate.goo...ved=0CD8Q7gEwAQ lol,you ninja'd me whilst i was trying to find the d/load link
Guest peterck Posted December 3, 2012 Report Posted December 3, 2012 (edited) Hello all, I did the OTA-type upgrade from R3 to 4, then immediately 5 (I didn't realise you could skip 4 at the time). Now I'm getting randomly dumped out of the browser to the home screen, with no message of any type. On returning to the browser, sometimes it's remembered which page I'm on, sometimes not. It actually happened just now on here if that's useful information? (full web-page view rather than the phone version, which irritatingly doesn't give you page numbers!) I wasn't having any issues with R3 apart from very occasional (presumably 3G) reboots, so I'll just revert to that for now but I'd be interested to hear if it's just me or if this is a problem other people are having. It's still the best rom available by a mile by the way, so thanks - I don't want to sound ungrateful! Edit: in case it's also useful, it seems to happen towards the end of a page loading (rather than on a fully-loaded page). your not the only one it happens to me too but I don't mind that much. This Rom is still the best out there :D. Edited December 3, 2012 by peterck
Guest Ludak021 Posted December 3, 2012 Report Posted December 3, 2012 (edited) @Dazzozo: Viber not working for me. I tried 3 different wi-fi networks with 5 phones (4 phones + mine), different phones. 2 of them are on CM10, 2 are on sense. Viber works between those 4 phones, on my phone it works but I cannot hear people while other 4 phones don't have this problem. Phones involved were: htc hd2 x 2 (one cm9 other cm10) sensation and samsung s3. edit: I installed first CM9 RC1 manually with all wipes formats etc, rest went through OTA. Edited December 3, 2012 by Ludak021
Guest tcpaulh Posted December 3, 2012 Report Posted December 3, 2012 (edited) If anyone is having a problem, please try and catch it happening in a log. Details of how to do so are at https://docs.google....s5lPW7XdiA/edit The Android Debug Bridge windows executable (adb.exe) can be used to collect logs from a connected android device. Download adb.zip and extract it to your PC Open the adb folder then open a command window in it (shift+rightclick, open command window here) Plug phone into your PC! Standard logcat (android system log) adb logcat > logcat.txt ctrl-c when you want to stop logging radio logcat (for eg wifi probs) adb logcat -b radio > radiolog.txt ctrl-c when you want to stop logging kernel logs adb shell su cat /proc/kmsg > /sdcard/kmsg.txt exit adb pull /sdcard/kmsg.txt kernel message buffer (on request) adb shell dmesg > /sdcard/dmesg.txt exit adb pull /sdcard/dmesg.txt /proc/last_kmsg (not available in G300 CM9. Possibly in the future?) Once log collected, take a look to see if you can see any errors and post to pastebin.com. kmsg/dmesg are generally helpful in tracking down ‘low level’ problems related to hardware devices, whilst logcat is helpful for problems with specific apps and the Android user environment. If you can’t decide which log is pertinent, provide both. Edit: These instructions were brought to you by the letters T and C and the lads on IRC Edited December 3, 2012 by tcpaulh
Guest apopberz Posted December 3, 2012 Report Posted December 3, 2012 I seem to constantly have an issue with this rom where moving from a Wifi-area to a non-wifi area the phone should fall-back to 3G but does not. I need to disable 3G (or enable airplane mode) and then re-enable it to have the data connection work. I've checked the APN settings are correct as I suspected this may have been the issue but it seems fine.
Guest apopberz Posted December 3, 2012 Report Posted December 3, 2012 I seem to constantly have an issue with this rom where moving from a Wifi-area to a non-wifi area the phone should fall-back to 3G but does not. I need to disable 3G (or enable airplane mode) and then re-enable it to have the data connection work. I've checked the APN settings are correct as I suspected this may have been the issue but it seems fine.
Guest thebuell Posted December 3, 2012 Report Posted December 3, 2012 I'm now quite happily running CM9, thanks for all that hard work making it available. Just a small niggle, I just noticed the lock screen displays the long date in the american format, perhaps something to be addressed in future?
Guest MrPuddington Posted December 3, 2012 Report Posted December 3, 2012 I seem to constantly have an issue with this rom where moving from a Wifi-area to a non-wifi area the phone should fall-back to 3G but does not. I need to disable 3G (or enable airplane mode) and then re-enable it to have the data connection work. I've checked the APN settings are correct as I suspected this may have been the issue but it seems fine. Sometimes it fails to connect to mobile broadband when I switch it on in the toggles. Even using the settings it does not initiate mobile broadband, and I have to reboot - then it works just fine. I suppose that could be one of those RIL issues? This is on R1 through R3, and it sounds vaguely similar to your issue.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now