[Kernel] CeXstel v0.62 (Y300/G510) [Stock/CM] [29/03/14]

[Guest angellgtz]

Can you explain how to undervolt @ceastel ?

[Guest kripticmc]

PAC kernel just make my phone boot loop on huawei logo with PAC an cm10.1 I am on y300 please help

[Guest kripticmc]

This kernel doesn't support voltage control every app apart from trickster says it so maybe the vdD is fake like the oc was :(

Edited November 8, 2013 by kripticmc

[Guest angellgtz]

This kernel doesn't support voltage control every app apart from trickster says it so maybe the vdD is fake like the oc was :(

Yes : ( it needs to be fixed In cm10 works very smooth for some time then it lags and stop responding : ( And can you add this opcion to the kernel? : https://github.com/Christopher83/samsung-kernel-msm7x30/commit/bd8ec68009b419c8dcfa22bfa5c2e2f49b359448 Edited November 8, 2013 by angellgtz

[Guest Gliwusss]

oc wasn't fake, it was fully working for me :P

[Guest kripticmc]

oc wasn't fake, it was fully working for me :P

Read back even dev said it was fake oc

An great work ceastel I know these huawei y300 are tedious phones all thanks to huawei lol

[Guest Nidzap]

what is fiops scheduler? How it works ?

[Guest Ceastel]

@kripticmc

Kernel for Cm10.1 is comaptible wtih PAC but PAC kernel is not comatible with Cm10.1 :D

 

This kernel have support for voltage control... (now only on y300)
You can see it here :

(you can set here voltage in steps from 1 to 7)

I think it's not fake ... When i tried set 7 in voltage table y300 getting crash because it's too high voltage for this device...

@angellgtz
Maybe I will add this feature in new version.
And sorry I don't tested Cm10 kernel

 

@Nidzap

Check this : LINK

[Guest kripticmc]

@kripticmc

Kernel for Cm10.1 is comaptible wtih PAC but PAC kernel is not comatible with Cm10.1 :D

This kernel have support for voltage control... (now only on y300)

You can see it here :

(you can set here voltage in steps from 1 to 7)

I think it's not fake ... When i tried set 7 in voltage table y300 getting crash because it's too high voltage for this device...

@angellgtz

Maybe I will add this feature in new version.

And sorry I don't tested Cm10 kernel

@Nidzap

Check this : LINK

What should I set the voltage to

[Guest kripticmc]

Worked out how to use voltage but can't under volt only let's you over volt tbh

[Guest angellgtz]

@kripticmc

Kernel for Cm10.1 is comaptible wtih PAC but PAC kernel is not comatible with Cm10.1 :D

This kernel have support for voltage control... (now only on y300)

You can see it here :

(you can set here voltage in steps from 1 to 7)

I think it's not fake ... When i tried set 7 in voltage table y300 getting crash because it's too high voltage for this device...

@angellgtz

Maybe I will add this feature in new version.

And sorry I don't tested Cm10 kernel

@Nidzap

Check this : LINK

Thanks I hope you can fix it for cm10

Because I've loved it is very very fast !

[Guest PrinceEndymion88]

Your kernel is very fast but is really unstable on cyanogenmod 10.1 =( . The screen often freezes and I have to remove the battery and reboot! =(

Edited November 8, 2013 by PrinceEndymion88

[Guest kripticmc]

Your kernel is very fast but is really unstable on cyanogenmod 10.1 =( . The screen often freezes and I have to remove the battery and reboot! =(

I had same prob but I did a full wipe an a clean install of all an now its sweet

[Guest PrinceEndymion88]

I had same prob but I did a full wipe an a clean install of all an now its sweet

I did a full wipe too... but nothing...after a while the problem returns...

[Guest kripticmc]

I did a full wipe too... but nothing...after a while the problem returns...

Did you alter any settings I advise putting it on on demand governor an soi I/o schedule

[Guest PrinceEndymion88]

Did you alter any settings I advise putting it on on demand governor an soi I/o schedule

I always use ONDEMAND governor... and I've tried both with NOOP and with ROW scheduler, but I've always the same problem =(

[Guest kripticmc]

At you g510 or y300 @ above

[Guest Silencer96]

This kernel runs like a dream on CM10.1. All it's missing is a 1.2GHz default overclock and default lowered voltages (ie: -25mV across the board). 

 

Keep up the good work!

[Guest Parnas72]

Hi,

do I need a "cifs.ko" module in order to use CIFS with this kernel, or is it embedded ?

I flashed the stock version from the first post, but when I try to "mount -t cifs" some network resources I always get "invalid argument".

 

I'm on a Y300-0100 terminal with a B175 stock ROM.

[Guest fonz93]

kernel is stable on stock b197, also on cyanogenmod 10 rc9, coming overclock?:DD (joking hehe xD)

[Guest Gliwusss]

which i/o sheduler and TCP congestion control algorithm are You using?

i wanna have good performence balanced with battery saving

[Guest ZolaIII]

which i/o sheduler and TCP congestion control algorithm are You using?

i wanna have good performence balanced with battery saving

Deadline & Westwood for the moment be!

Actually best performing ones will save battery life! Purpose of this is actually to test them & report back so that Ceastel & others can establish default ones & clean out others!

[Guest PrinceEndymion88]

why I have problems with cm10.1 r14? =( my screen often freezes =(

[Guest Gliwusss]

@Zolalll

it's working visual better on your confuguration (mine was tcp cubic and i/o sio), but the antutu score is about 300 points lower

[Guest Sigray]

With your latest kernel all MiUi has a great visual quality without milky screen but camera doesnt work. It cant connect...whats the reason?