Guest tadopogi Posted March 24, 2014 Report Posted March 24, 2014 ndi moba na encounter ung mtagal na pag wake up ng fon..pag pinindot ung powerkey... use english here man. i dont encounter long wakeups when pressing the powerkey.
Guest tadopogi Posted March 24, 2014 Report Posted March 24, 2014 for me the latest release is great! so was the 3.85. I only had some minor lag in 3.8. Everything is working fine! and the ui is soo smooth. Great work! it's always best to clean install rather than flashing over the older rom.
Guest Jonnel Santiago Posted March 24, 2014 Report Posted March 24, 2014 (edited) use english here man. i dont encounter long wakeups when pressing the powerkey. oops sori...;-) im poor in english... (via google translate):-P Edited March 24, 2014 by Jonnel Santiago
Guest SaurabhRCk Posted March 24, 2014 Report Posted March 24, 2014 it's always best to clean install rather than flashing over the older rom. I did not do clean install, always dirty flash! no problem here! :)
Guest chil360 Posted March 24, 2014 Report Posted March 24, 2014 The 3.10 is out Looking at gerrit, there is only 1 commit from 3.9 to 3.10. that is relevent to us. When I built my 3.9, I synced my sources after this commit had been made so it's already in my 3.9 build. So, I can't see much point rebuilding the rom just to update the version number.
Guest cristian22898 Posted March 24, 2014 Report Posted March 24, 2014 I tried the version 3.90 and I have to say that the performance compared to only 3.85 and installed the whatsapp ye got activate the swap and AnTuTu benchmark sac only to 7000 and 7650 to 3.85
Guest SaurabhRCk Posted March 24, 2014 Report Posted March 24, 2014 I tried the version 3.90 and I have to say that the performance compared to only 3.85 and installed the whatsapp ye got activate the swap and AnTuTu benchmark sac only to 7000 and 7650 to 3.85 have you used Victod's new method to active swap??
Guest squal Posted March 24, 2014 Report Posted March 24, 2014 for me the latest release is great! so was the 3.85. I only had some minor lag in 3.8. Everything is working fine! and the ui is soo smooth. Great work! how about the games? its run like in the stock?
Guest SaurabhRCk Posted March 24, 2014 Report Posted March 24, 2014 how about the games? its run like in the stock? Depends on game. I havw good performance in dead trigger 2, subway surfer, world of goo. Soo it depends on game.
Guest squal Posted March 24, 2014 Report Posted March 24, 2014 Depends on game. I havw good performance in dead trigger 2, subway surfer, world of goo. Soo it depends on game. really? good to know that;-) im in cm11...and the games laggy...
Guest squal Posted March 24, 2014 Report Posted March 24, 2014 use english here man. i dont encounter long wakeups when pressing the powerkey. what recovery do you use...
Guest farfix Posted March 24, 2014 Report Posted March 24, 2014 I used the victor's method and I notice a better performance in the 3.9 Build... I have a doubt... I'm using the "Xperia Z1" launcher and I missed the transparent bar.... Is there a way to recover the transparent bar without using Nova Launcher?
Guest thetonyxx Posted March 24, 2014 Report Posted March 24, 2014 Is there a way to recover the transparent bar without using Nova Launcher? use stock kk launcher or one copy of it avaible on google play
Guest cristian22898 Posted March 24, 2014 Report Posted March 24, 2014 have you used Victod's new method to active swap?? hello I used this method to disable zram trickster flashee mod zip by recovery and run a 250 megabyte swap file within the folder system enters this link: http://www.modaco.com/topic/370237-kk-all-modother-disable-zram-enable-swap-file/#entry2198605
Guest wackoj Posted March 24, 2014 Report Posted March 24, 2014 The cropped numbers when writing the PIN now are shown complete! I hope everything is as good as it seems
Guest Nidzap Posted March 24, 2014 Report Posted March 24, 2014 i have bad battery life , can i improve that?
Guest ivan41 Posted March 25, 2014 Report Posted March 25, 2014 :( :( :( :( I have to report the death of my Ascend Y300. RIP. I flashed 3.9 through TWRP late yesterday as normal after a notification from Slim OTA. Downloaded, and rebooted into recovery. No problemo......... Flashed 3.9. Flashed SLIM AOI GAPPS. Fine. Wiped cache, wiped dalvik. Rebooted. GOT Huawei Splash screen, then slimkat boot image. Then bright green screen with a blue rectangle at the top and a red rectangle at the bottom. then bright blue screen for 20 seconds. Phone went off and wont switch back on. Took out battery, left out 10 seconds but putting battery in or putting charger in has no effect, its totally dead and unresponsive. thats my second Y300 in 6 months, and wifey dear has now laid the law down saying i cant have a new mobile every 3 months, i cant get another as she says "crap chinese thing" Shes trying to get me to get a Samsung..................... anyway, looks like a total harDware failure so ill be skipping off to carphone warehouse at the weekend, and NOT coming back with a Samsung ;-D
Guest Mirke Posted March 25, 2014 Report Posted March 25, 2014 Copy dload folder from this zip to your SD-Card (must be on root folder): http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=18269 While Holding Vol+ and Vol- press and keep power button. Keep them all three together until Flash procedure starts. Buy me a beer after ;) Best regards (Pozdrav)
Guest SaurabhRCk Posted March 25, 2014 Report Posted March 25, 2014 :( :( :( :( I have to report the death of my Ascend Y300. RIP. I flashed 3.9 through TWRP late yesterday as normal after a notification from Slim OTA. Downloaded, and rebooted into recovery. No problemo......... Flashed 3.9. Flashed SLIM AOI GAPPS. Fine. Wiped cache, wiped dalvik. Rebooted. GOT Huawei Splash screen, then slimkat boot image. Then bright green screen with a blue rectangle at the top and a red rectangle at the bottom. then bright blue screen for 20 seconds. Phone went off and wont switch back on. Took out battery, left out 10 seconds but putting battery in or putting charger in has no effect, its totally dead and unresponsive. thats my second Y300 in 6 months, and wifey dear has now laid the law down saying i cant have a new mobile every 3 months, i cant get another as she says "crap chinese thing" Shes trying to get me to get a Samsung..................... anyway, looks like a total harDware failure so ill be skipping off to carphone warehouse at the weekend, and NOT coming back with a Samsung ;-D Copy dload folder from this zip to your SD-Card (must be on root folder): http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=18269 While Holding Vol+ and Vol- press and keep power button. Keep them all three together until Flash procedure starts. Buy me a beer after ;) Best regards (Pozdrav) I also heard this method works for many y300/g510 users who were having same problem. Give it a try.
Guest spanitzer Posted March 25, 2014 Report Posted March 25, 2014 Lulzactive-Sio-1046mhz-196mhz {style_image_url}/attachicon.gif uploadfromtaptalk1395687811452.jpg{style_image_url}/attachicon.gif uploadfromtaptalk1395687823899.jpg ? 3D Test crashed by me :( :( :( :( :( I have to report the death of my Ascend Y300. RIP. I flashed 3.9 through TWRP late yesterday as normal after a notification from Slim OTA. Downloaded, and rebooted into recovery. No problemo......... Flashed 3.9. Flashed SLIM AOI GAPPS. Fine. Wiped cache, wiped dalvik. Rebooted. GOT Huawei Splash screen, then slimkat boot image. Then bright green screen with a blue rectangle at the top and a red rectangle at the bottom. then bright blue screen for 20 seconds. Phone went off and wont switch back on. Took out battery, left out 10 seconds but putting battery in or putting charger in has no effect, its totally dead and unresponsive. thats my second Y300 in 6 months, and wifey dear has now laid the law down saying i cant have a new mobile every 3 months, i cant get another as she says "crap chinese thing" Shes trying to get me to get a Samsung..................... anyway, looks like a total harDware failure so ill be skipping off to carphone warehouse at the weekend, and NOT coming back with a Samsung ;-D EMMC bricked?
Guest DamnedMaruko Posted March 25, 2014 Report Posted March 25, 2014 ? 3D Test crashed by me :( EMMC bricked? Check if 2d force rendering is on in developer settings. if its on, uncheck it!
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now