Coolpad F1 8297w

[Guest qwazar87]

The phone also flashes logo at startup. Firmware from emjot for flashtools is not helped out by mistake BROM ERROR: S_BROM_CMD_JUMP_DA_FAIL(2035)

Also only recovery not install too with this mistake

Pls help

[Guest Robi4ok]

China Root Tools collection (anniversary edition):

 

Odd Rabbit ROOT

Official website: http://www.7to.cn

 

ROOT Masters

Official website: http://www.mgyun.com/vroot

 

360 key ROOT

Official website: http://shuaji.360.cn/root/

 

 

Someone mentioned at Anzhi forum that he had success with new 360 root

Tried first 3 links, failure :(  

[Guest dakok]

This is just a proposal for those who understand the risk of flashing:

 

Official Coolpad F1 WCDMA 020 factory rom and flashing tool

(google translate with minor changes)

 

Official F1 WCDMA 8297w 020 Rom:

http://pan.baidu.com/s/1eQd1Dz8

http://pan.baidu.com/s/1dD9rDlB

 

Official Coolpad flashing tool:

http://pan.baidu.com/s/1pJBFkLH

 

Driver 1:

http://pan.baidu.com/s/1kTC3q9x

 

Driver 2:

http://pan.baidu.com/s/1mg4ZH5u

http://pan.baidu.com/s/1qWPkpAk

(this one goes if there is an exclamation mark in windows device manager after driver 1 installation)

 

 

Procedure:

 

1. Download drivers

2. Download Official Coolpad flashing tool

3. Press volume down (vol -) and power button together for 10 seconds until "Factory Mode" is shown. "Fastboot mode" - connect the USB cable with PC. Wait for connection.

4. Start the Official Coolpad flashing tool, like shown in picture

 

 

5. Select 100% of the official package validation and automatically into the flash

 

 

 

P.S. This is the original text for the steps 1-5:

刷入步骤

1，下载驱动

2，下载官方线刷工具

3，手机同时按音量上、下键和电源键10秒，等手机界面上方显示“FACTORY MODE”，下方显示“fastboot mode”后连接电脑，等待驱动连接

4，打开官方线刷工具，如图

 

5，选择官方包验证100%后并自动刷入

 

Original post: http://bbs.anzhi.com/thread-8908513-1-1.html

(Anzhi is not easily reachable outside of China)

Edited May 22, 2014 by dakok

[Guest qwazar87]

 

This is just a proposal for those who understand the risk of flashing:

 

Official Coolpad F1 WCDMA 020 factory rom and flashing tool

(google translate with minor changes)

 

Official F1 WCDMA 8297w 020 Rom:

http://pan.baidu.com/s/1eQd1Dz8

 

Official Coolpad flashing tool:

http://pan.baidu.com/s/1pJBFkLH

 

Driver 1:

http://pan.baidu.com/s/1kTC3q9x

 

Driver 2:

http://pan.baidu.com/s/1mg4ZH5u

(this one goes if there is an exclamation mark in windows device manager after driver 1 installation)

 

 

Procedure:

 

1. Download drivers

2. Download Official Coolpad flashing tool

3. Press volume down (vol -) and power button together for 10 seconds until "Factory Mode" is shown. "Fastboot mode" - connect the USB cable with PC. Wait for connection.

4. Start the Official Coolpad flashing tool, like shown in picture

 

Is it can help me? The phone only flashes a logo

Edited May 21, 2014 by qwazar87

[Guest dakok]

Yes, but there is a risk of bricking phone, since nobody tested it. Nobody outside of China, to be more precise.

If I were you I would try this as final measure only.

It would be good to download this and keep it if something goes wrong.

In the meantime, try to solve it with flash tool...

[Guest qwazar87]

I am try on different computers the same error . The phone is dead 4 days) The recovery not installs with a flashtools. But I have his native backup for cwm. But how this help I do not know

[Guest qwazar87]

 

This is just a proposal for those who understand the risk of flashing:

 

Official Coolpad F1 WCDMA 020 factory rom and flashing tool

(google translate with minor changes)

 

Official F1 WCDMA 8297w 020 Rom:

http://pan.baidu.com/s/1eQd1Dz8

 

Official Coolpad flashing tool:

http://pan.baidu.com/s/1pJBFkLH

 

Driver 1:

http://pan.baidu.com/s/1kTC3q9x

 

Driver 2:

http://pan.baidu.com/s/1mg4ZH5u

(this one goes if there is an exclamation mark in windows device manager after driver 1 installation)

 

 

Procedure:

 

1. Download drivers

2. Download Official Coolpad flashing tool

3. Press volume down (vol -) and power button together for 10 seconds until "Factory Mode" is shown. "Fastboot mode" - connect the USB cable with PC. Wait for connection.

4. Start the Official Coolpad flashing tool, like shown in picture

 

 

5. Select 100% of the official package validation and automatically into the flash

 

 

 

P.S. This is the original text for the steps 1-5:

刷入步骤

1，下载驱动

2，下载官方线刷工具

3，手机同时按音量上、下键和电源键10秒，等手机界面上方显示“FACTORY MODE”，下方显示“fastboot mode”后连接电脑，等待驱动连接

4，打开官方线刷工具，如图

 

5，选择官方包验证100%后并自动刷入

 

Original post: http://bbs.anzhi.com/thread-8908513-1-1.html

(Anzhi is not easily reachable outside of China)

 

Can you download it on google disc?

[Guest dakok]

I'll do my best :)

[Guest qwazar87]

Thanks hope that phone will work after that

[Guest cristian77]

I manage to get root on the phone. But this root is not permanent, after restarting your phone you have to root the phone again.

 

 

I have a sort of chinese android market place where i look for root apk and i find this apk 

 

http://www.1mobile.com/com-mgyun-shua-su-974796.html

 

with this apk you manage to get root rights, after the phone is restarted you have to root again. is not complicated - 2 click away and is still better than none.

 

if someoane manage to get permanent root it will be awesome. :)

 

I have original rom version 4.2.015.P0.140321.8297W

 

good luck!

[Guest dakok]

Well, Cristian, that is great news - and it doesn't matter that it is not permanent.

 

Root enables the MobileUncle app to install CWM and with CWM you are able to 

do the nandroid backup and then 

flash another rom which will probably have the permanent root :D

 

P.S. I think this is vRoot (mobile version)

Edited May 22, 2014 by dakok

[Guest bryfly]

T

http://bbs.ydss.cn/forum.php?mod=viewthread&tid=417103&extra=page%3D1%26filter%3Dtypeid%26typeid%3D2295%26typeid%3D2295

also mentions 015 official package push to upgrade to 020 after seemingly unable to root it

 

Just for info guys:- Tried the above package, which worked ok and took me back to original coolpad rom (all chinese apps) and did allow OTA update from coolpad, but it wiped out Gapps and CWM.. Only two languages chinese and english.

Changed the recovery img in the rom  for the cwm recovery img and re flashed the rom, this worked fine but removed the ability to do OTA updates, so guess the update OTA function must rely on the coolpad recovery IMG, as i gained nothing i  went back to one of my cwm backups.

[Guest dakok]

Bryfly, now you are an experienced Flash Tool user so could you make a short flashing guide, since we have to fight with the language? :D

 

Factory rom v 015 could be handy if things go wrong.

Edited May 22, 2014 by dakok

[Guest cristian77]

I have a question - it is the only thing that i can not do with this phone - setup an yahoo acount on default email apk!

Help?!

[Guest jamjamjam]

Would anyone be so kind as to give their impressions of the device? A lot of people seem to have it but not many are yet commenting on the device itself.

 

I'm strongly considering getting one of these to replace my battered Vowney V5 so any opinions would be really helpful.

[Guest goodfella123]

Bryfly, now you are an experienced Flash Tool user so could you make a short flashing guide, since we have to fight with the language? :D

 

Factory rom v 015 could be handy if things go wrong.

 

Please could we make a guide.

I'm due to receive mine in approx 7 days and would be grateful.

There is a lot of info on here but all in one post would be ideal.

I have flashed roms before but never owned a phone from China.

When i receive mine i'll try and provide whatever input i can to help.

[Guest dakok]

@jamjamjam

 

What do you think why nobody comments about phone? :D

 

Same thing happens at russian 4PDA forum and at two spanish forums.

Most complaints are about problems with root, after OTA upgrades, and I think this was Coolpad's intention.

 

Phone looks good, screen is great, back cover is very firm, camera is better than others in that price range, GPS is perfect.

Gyroscope sensor absence does not affect the screen orientation change. WiFi is slightly better than that of my v987 (which is just fine),

No glitches in most of the roms, official and custom, everything goes smooth

No heating

Big 50g battery (1g is approximately 50 mAh)

Huge ammount of custom roms

3-4 official updates during last 2 months (and option of using updates from a similar phone - TD version)

 

@goodfella123

 

No problem. You can go through the topic and copy and save the links of the most useful posts.

By the time your phone arrives we will have a nice collection :)

Then I can try to organise it and we can kindly ask bryfly to host that in his first post :D

Edited May 22, 2014 by dakok

[Guest bryfly]

Bryfly, now you are an experienced Flash Tool user so could you make a short flashing guide, since we have to fight with the language? :D

 

Factory rom v 015 could be handy if things go wrong.

Not really experienced enough to write a guide re flashing, as when I did it I had my fingers crossed and eyes shut, what I will say is that getting the drivers into the pc was the hardest thing to do, once they are installed correctly the rest was quite straight forward.

I followed the tutorial packaged with the rom which I googled into English, also there is a lot of tutorials on the following forum to help people out

http://www.chinaphonearena.com/forum/Forum-Tutorials

[Guest Maringer]

My only real criticism of the phone so far is that the speaker (and earpiece), seem to be a little quiet. However, I have a feeling that this may be down to the ROM I'm using at present, Jonzalvo's port of AOSP. The thread on the Spanish forum mentions something about increasing volumes if required, but I haven't bothered to do so as yet.

 

Video recordings also have a sort of wavy distortion line running through the clip but I'm sure this is down to my current ROM because I briefly tested a MIUI ROM which didn't exhibit the same issue.

[Guest qwazar87]

 

This is just a proposal for those who understand the risk of flashing:

 

Official Coolpad F1 WCDMA 020 factory rom and flashing tool

(google translate with minor changes)

 

Official F1 WCDMA 8297w 020 Rom:

http://pan.baidu.com/s/1eQd1Dz8

http://pan.baidu.com/s/1dD9rDlB

 

Official Coolpad flashing tool:

http://pan.baidu.com/s/1pJBFkLH

 

Driver 1:

http://pan.baidu.com/s/1kTC3q9x

 

Driver 2:

http://pan.baidu.com/s/1mg4ZH5u

http://pan.baidu.com/s/1qWPkpAk

(this one goes if there is an exclamation mark in windows device manager after driver 1 installation)

 

 

Procedure:

 

1. Download drivers

2. Download Official Coolpad flashing tool

3. Press volume down (vol -) and power button together for 10 seconds until "Factory Mode" is shown. "Fastboot mode" - connect the USB cable with PC. Wait for connection.

4. Start the Official Coolpad flashing tool, like shown in picture

 

 

5. Select 100% of the official package validation and automatically into the flash

 

 

 

P.S. This is the original text for the steps 1-5:

刷入步骤

1，下载驱动

2，下载官方线刷工具

3，手机同时按音量上、下键和电源键10秒，等手机界面上方显示“FACTORY MODE”，下方显示“fastboot mode”后连接电脑，等待驱动连接

4，打开官方线刷工具，如图

 

5，选择官方包验证100%后并自动刷入

 

Original post: http://bbs.anzhi.com/thread-8908513-1-1.html

(Anzhi is not easily reachable outside of China)

 

Please can you download this firmware only to uzbek filehosting? file.nnm.uz

But there need to break archives for 100 mb

[Guest dakok]

I will upload it to google drive. Chinese download takes some time and my upload is no fast. Don't worry, I will upload it.

[Guest dakok]

Two broken downloads :(

Trying with Jdownloader now...

[Guest qwazar87]

thanks

[Guest dakok]

I found the way for a speedy download from Baidu :D

 

Use Orbit Downloader. Take care while installing it to skip some adware stuff (cancel things if unsure what they mean)

 

Open links at Baidu to start download (use Chrome browser for translation)

When download starts, go to Chrome menu -> downloads.

Find your downloading file there and right click on it and copy link address.

You can stop Chrome download now.

 

Open that link in Orbit

 

Voila! It flies at 300 - 350 KB/s during last 15 minutes!

Normal dload speed was 60 KB/s and it usually brought corruted files.

 

 

 

For those of you that do not want to wait for my google drive upload, here is factory 020 installation pack,

collected and redirected to my Baidu Drive:

 

http://pan.baidu.com/s/1pJtzFDL

 

1st driver is 15MB

2nd driver is 8MB

There is PDF of the Modaco post, too

 

 

1st driver: I think this is the same driver that comes on the phone partition that mounts as CD drive when phone is attached to PC

 

2nd driver: Upgrade drivers:

2nd drivers

Release Note

 

Version Description

V1.5 Add new USB VID/PID for VIA pcmodem. The further detail, please see the sheet of Combination.

V1.4 Remove un-used files: adb.exe

V1.3 Add new USB VID/PID for CDC-ACM

V1.2 Remove un-used files: usb8023x.sys, rndismpx.sys, winusbcoinstaller.dll

V1.1 Update new USB VID/PID for ICS

 

V1.0

 

Windows RNDIS driver for Android Tethering 

Installation:

   

1. Please update Microsoft Hotfix KB959765 for windows XP;

   

2. Then install RNDIS driver using tetherxp.inf.

 

 

Windows ACM COM port driver for Android 

Installation:

   

1. Please update Microsoft Hotfix KB943198 for windows XP;

   

2. It is better to update your windows XP to SP3;

   

3. Then install ACM driver using cdc-acm.inf.

 

 

Windows adb driver for Android 

Installation:

  

1. Install adb driver using android_winusb.inf.

 

 

Windows MTP driver for Android 

Installation:

  

1. install Windows media player 10 or above version

  

2. Install MTP driver using wpdmtp.inf."

 

 

Supported OS

Windows XP 32 (Professional)

Windows Vista32

Windows Vista64

Windows7 32bit

Windows7 64bit

 

Edited May 22, 2014 by dakok

[Guest bryfly]

Another good guide is here for flashing ROMs http://droidchina.com/forum/Thread-ROM-flashing-tutorial-for-MTK-chipset-phones