[LiquidSmooth][Y300/G510 ROM KK][MileStone-v3.2][UNOFFICIAL][ WEEKLY]

[Guest luca020400]

OK ;-)

Good test ;-)

[Guest spanitzer]

Wow!

The Bootanimation is very nice!

[Guest Domino2115]

Wow!

The Bootanimation is very nice!

And what about ui is it smooth? Pull down and everything else?

[Guest Y300-0100]

Wow!

The Bootanimation is very nice!

can you check NFC using logcat. with phone you can do it through terminal using command

su
logcat > /sdcard/nfc.txt

to see is it connecting with your hardware.

[Guest moochermick]

I don't think nfc is working, it won't detect my bank card which it does on stock rom.

[Guest Y300-0100]

I don't think nfc is working, it won't detect my bank card which it does on stock rom.

can you make a logcat and send it to me? As i said i don't own g510 and i was working on blind.

[Guest moochermick]

can you make a logcat and send it to me? As i said i don't own g510 and i was working on blind.

Back on cm11 now, i just did a quick test while on dinner break. I will try later when I don't need my phone so much.

[Guest Obi8]

Hi thanks for the ROM, nice look.

 

Can i use this kernel Chil360-kernel v0.50 with your ROM?

[Guest spanitzer]

This Rom is smooth for a KitKat Rom.

[Guest dus40]

This Rom is smooth for a KitKat Rom.

Screenshot_2014-09-04-15-48-05.pngScreenshot_2014-09-04-15-46-46.pngScreenshot_2014-09-04-15-46-55.png

how is ic comparing to slimkat ? to stock ?

[Guest spanitzer]

Better than Stock.

I dont know about slimkat. I doesnt test it.

Antutu crashes by my.

[Guest spanitzer]

--------- beginning of /dev/log/main

E/ ( 137): virtual void android::QCameraStream_preview::stop(): X

E/ ( 137): App_cb Notify 0x0, datacb=0x0

E/ ( 137): Qvoid android::disable_msg_type(camera_device*, int32_t): E

E/ ( 137): Qvoid android::disable_msg_type(camera_device*, int32_t): E

E/ ( 137): Qvoid android::stop_preview(camera_device*): E

E/ ( 137): Qint android::cancel_picture(camera_device*): E

E/ ( 137): Qvoid android::release(camera_device*): E

E/ ( 137): setPreviewWindow: E mPreviewState = 0, mStreamDisplay = 0x400120c8

E/ ( 137): android::status_t android::QCameraHardwareInterface::setPreviewWindow(preview_stream_ops_t*):Received Setting NULL preview window

E/ ( 137): android::status_t android::QCameraHardwareInterface::setPreviewWindow(preview_stream_ops_t*): mPreviewWindow = 0x0x0, mStreamDisplay = 0x0x400120c8

E/ ( 137): setPreviewWindow: E

W/ ( 137): Setting NULL preview window

E/ ( 137): setPreviewWindow : X, mPreviewState = 0

I/CameraClient( 137): Destroying camera 0

E/ ( 137): Qint android::close_camera_device(hw_device_t*): device =0x4069a2b8 E

E/ ( 137): virtual void android::QCameraStream_preview::release() : BEGIN

E/ ( 137): : virtual void android::QCameraStream_preview::release() : De init Channel

E/ ( 137): virtual void android::QCameraStream_preview::release(): END

I/mm-still-omx( 137): omxJpegClose:

E/QCameraHWI_Rdi( 137): virtual void android::QCameraStream_Rdi::release() : BEGIN

E/QCameraHWI_Rdi( 137): : virtual void android::QCameraStream_Rdi::release() : De init Channel

E/QCameraHWI_Rdi( 137): virtual void android::QCameraStream_Rdi::release(): END

E/mm-camera( 146): config_shutdown_pp Camera not in streaming mode. Returning.

W/MemoryDealer( 137): madvise(0x43626000, 16384, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40045480 successful

W/MemoryDealer( 137): madvise(0x40692000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x400453c8 successful

W/MemoryDealer( 137): madvise(0x40690000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x400452f8 successful

W/MemoryDealer( 137): madvise(0x4068e000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40045168 successful

W/MemoryDealer( 137): madvise(0x4068c000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40730cc0 successful

W/MemoryDealer( 137): madvise(0x4262a000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40730b98 successful

W/MemoryDealer( 137): madvise(0x42622000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x400ddbd8 successful

W/MemoryDealer( 137): madvise(0x4261a000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x4072e7e0 successful

W/MemoryDealer( 137): madvise(0x42612000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40699818 successful

W/MemoryDealer( 137): madvise(0x4082d000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40699760 successful

W/MemoryDealer( 137): madvise(0x4082b000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40699690 successful

W/MemoryDealer( 137): madvise(0x40829000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40048de0 successful

W/MemoryDealer( 137): madvise(0x40827000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40699e28 successful

W/MemoryDealer( 137): madvise(0x4260a000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40699d00 successful

W/MemoryDealer( 137): madvise(0x42602000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x40699bc0 successful

W/MemoryDealer( 137): madvise(0x425fa000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/OMXNodeInstance( 137): OMX_FreeBuffer for buffer header 0x406999a0 successful

W/MemoryDealer( 137): madvise(0x425f2000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint

I/GEL ( 771): handleIntent(Intent { act=android.intent.action.MAIN cat=[android.intent.category.HOME] flg=0x10600000 cmp=com.google.android.googlequicksearchbox/com.google.android.launcher.GEL })

W/CAM_UI ( 2169): SurfaceTexture destroyed

I/Timeline( 771): Timeline: Activity_idle id: android.os.BinderProxy@41a13f80 time:357631

I/Timeline( 517): Timeline: Activity_windows_visible id: ActivityRecord{41f60e40 u0 com.google.android.googlequicksearchbox/com.google.android.launcher.GEL t1} time:357854

I/ActivityManager( 517): Displayed com.android.systemui/.recent.RecentsActivity: +425ms

I/Timeline( 602): Timeline: Activity_idle id: android.os.BinderProxy@428b3868 time:358714

I/Timeline( 517): Timeline: Activity_windows_visible id: ActivityRecord{41e40e90 u0 com.android.systemui/.recent.RecentsActivity t7} time:358806

I/Timeline( 771): Timeline: Activity_idle id: android.os.BinderProxy@41a13f80 time:360108

W/InputDispatcher( 517): channel '41f965a8 com.android.camera2/com.android.camera.CameraLauncher (server)' ~ Consumer closed input channel or an error occurred. events=0x9

E/InputDispatcher( 517): channel '41f965a8 com.android.camera2/com.android.camera.CameraLauncher (server)' ~ Channel is unrecoverably broken and will be disposed!

W/InputDispatcher( 517): Attempted to unregister already unregistered input channel '41f965a8 com.android.camera2/com.android.camera.CameraLauncher (server)'

I/Timeline( 517): Timeline: Activity_windows_visible id: ActivityRecord{41f60e40 u0 com.google.android.googlequicksearchbox/com.google.android.launcher.GEL t1} time:360282

W/lights ( 517): TP Button Light current value is 0

W/lights ( 517): button_backlight:property_get,percent =0

W/lights ( 517): TP Button Light current value is 255

W/lights ( 517): button_backlight:property_get,percent =0

W/AudioTrack( 517): AUDIO_OUTPUT_FLAG_FAST denied by client due to mismatching sample rate (48000 vs 44100)

I/AudioHardwareMSM76XXA( 137): Routing audio to Speakerphone

I/Timeline( 771): Timeline: Activity_launch_request id:com.quoord.tapatalkpro.activity time:365095

E/ThermalDaemon( 149): Sensor 'MSM_THERM' - alarm cleared 1 at 37.0 degC

W/Uploader( 803): No account for auth token provided

W/FlurryAgent( 2458): Start session

W/ResourceType( 2458): getEntry failing because entryIndex 52 is beyond type entryCount 1

W/Uploader( 803): No account for auth token provided

W/Uploader( 803): No account for auth token provided

I/Adreno200-EGL( 2458):

[Guest FrankAxtell]

Y300 don't have nfc?

[Guest luca020400]

No only g510

 

New comment on youtube ;-)

Edited September 4, 2014 by luca020400

[Guest Y300-0100]

Better than Stock.

I dont know about slimkat. I doesnt test it.

Antutu crashes by my.

Antutu 5 crashes sometimes antutu 4 doesn't. What about NFC? Is it working because from logcat I didn't see anything regarding NFC?

[Guest spanitzer]

I will test it on friday ;) .

This Liquid Smooth Rom is very very smooth! Smoother than Stock, CM11 and SlimKat.

[Guest Y300-0100]

I will test it on friday ;) .

This Liquid Smooth Rom is very very smooth! Smoother than Stock, CM11 and SlimKat.

wait to see next build.

[Guest spanitzer]

[Guest luca020400]

So work ??

[Guest spanitzer]

I dont know :(

I will test it today.

[Guest spanitzer]

[Guest fonz93]

Screenshot_2014-09-06-10-57-07.png

 

What it says, is not true... check free RAM in settings/applications, not there

[Guest Y300-0100]

New build for g510 should be in dropbox folder.

Some fixes of paths for NFC and new drivers.

And vold is not swinchable but default path is removable SD and some APS can be moved and some can't be.

[Guest spanitzer]

New driver for what?

[Guest Y300-0100]

New driver for what?

NFC driver.