Guest adeii Posted May 23, 2017 Report Share Posted May 23, 2017 On ponedeljak, 22. maj 2017. at 0:34 PM, degradatoome said: Hi, Adeii! I want to inform you, that y300 can be a bit overclocked to 1095 MHz. Thus you can make overclocked kernels for y300, just set cpu at 1095)) Chil360 overclocked it to 1048 MHz. Any patch to up 1048 to 1095 or add new freq. on freq.table? Link to comment Share on other sites More sharing options...
Guest madix-333 Posted May 23, 2017 Report Share Posted May 23, 2017 (edited) Hi logcat-dmesg from boot GlazeOS ? I see in xda LG L7 II not boot, because the kernel related problems. Edited May 23, 2017 by madix-333 Link to comment Share on other sites More sharing options...
Guest adeii Posted May 25, 2017 Report Share Posted May 25, 2017 Operation was successful, the patient is dead! https://www.androidfilehost.com/?w=files&flid=183925 Y300 still can not boot GlazeOS, android 7.1.2_r8; dmesg is uploaded. Some of errors are below: [ 0.000000] allocated 1472512 bytes of page_cgroup <6>[0, swa0000] please try 'cgroup_disable=memory' option if you don't want memory cgroups 0.097244] smps3: Failed to create debugfs directory 0.100829] Boot Reason = 0x01 <4>[1, swapper/0] [ 0.100853] mtk6252_dev_init not support <3>[1, swapper/0] [ 0.104531] i2c i2c-0: Failed to register i2c client ov8825 at 0x0d (-16) <3>[1, swapper/0] [ 0.104564] i2c i2c-0: Can't create device at 0x0d <3>[1, swapper/0] [ 0.104598] i2c i2c-0: Failed to register i2c client sc628a at 0x6e (-16) <3>[1, swapper/0] [ 0.104624] i2c i2c-0: Can't create device at 0x6e <6>[1, swapper/0] [ 0.110676] fs_gfx3d: normal <6>[1, swapper/0] [ 0.134634] bio: create slab <bio-0> at 0 <3>[1, swapper/0] [ 0.390696] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x22 <3>[1, swapper/0] [ 0.390726] qup_i2c qup_i2c.0: I2C Status: 132100 <3>[1, swapper/0] [ 0.390749] qup_i2c qup_i2c.0: QUP Status: 0 <3>[1, swapper/0] [ 0.390771] qup_i2c qup_i2c.0: OP Flags: 10 <4>[1, swapper/0] [ 0.390809] sx150x 0-0022: i2c write fail: can't write 01 to 10: -110 <4>[1, swapper/0] [ 0.390856] sx150x: probe of 0-0022 failed with error -110 <3>[0, swapper/0] [ 0.391184] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75 <3>[1, swapper/0] [ 0.391241] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected <4>[1, swapper/0] [ 0.391279] sx150x 1-003e: i2c write fail: can't write 01 to 1f: -107 <4>[1, swapper/0] [ 0.391319] sx150x: probe of 1-003e failed with error -107 <6>[1, swapper/0] [ 0.906603] __msm_rpc_connect: server not found 30000002:20001 <3>[27, kworker/u:2] [ 0.906688] rpcrouter: Server create rejected, version = 0, program = 3000003b <1>[1, swapper/0] [ 2.598614] pmem: pmem_setup: unable to register pmem driver(pmem) - zero size passed in! <4>[1, swapper/0] [ 2.604309] android_pmem: probe of android_pmem.0 failed with error -1 <1>[1, swapper/0] [ 2.612184] pmem: pmem_setup: unable to register pmem driver(pmem_adsp) - zero size passed in! <4>[1, swapper/0] [ 2.622053] android_pmem: probe of android_pmem.1 failed with error -1 <1>[1, swapper/0] [ 2.629876] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in! <4>[1, swapper/0] [ 2.639834] android_pmem: probe of android_pmem.2 failed with error -1 <3>[1, swapper/0] [ 3.005831] qup_i2c qup_i2c.1: I2C slave addr:0x28 not connected <3>[0, swapper/0] [ 3.112063] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75 <3>[1, swapper/0] [ 3.112386] qup_i2c qup_i2c.1: I2C slave addr:0x28 not connected <3>[0, swapper/0] [ 3.218601] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75 <3>[1, swapper/0] [ 3.218923] qup_i2c qup_i2c.1: I2C slave addr:0x28 not connected <7>[1, swapper/0] [ 3.229269] gpio_request: gpio-113 (gpio 113 for NFC pn544) status -16 <3>[0, swapper/0] [ 3.355199] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75 <3>[1, swapper/0] [ 3.355521] qup_i2c qup_i2c.1: I2C slave addr:0x28 not connected <4>[1, swapper/0] [ 3.355801] pn544_probe:unable to probe device. <4>[1, swapper/0] [ 3.356721] pn544_clock_output_ctrl close when error <4>[1, swapper/0] [ 3.357031] i2c-core: driver [pn544] using legacy suspend method <4>[1, swapper/0] [ 3.357303] i2c-core: driver [pn544] using legacy resume method <3>[1, swapper/0] [ 3.384703] flash_onfi_probe: No partition info available <6>[1, swapper/0] [ 3.391346] status: 20 <6>[1, swapper/0] [ 3.394733] nandid: 20202020 maker 20 device 20 <3>[1, swapper/0] [ 3.400588] ERROR: unknown nand device manuf=20 devid=20 <6>[1, swapper/0] [ 3.407246] SFLASHC Async Mode bit: 0 <6>[1, swapper/0] [ 3.474009] flash_onenand_probe: Detected an unsupported device <3>[1, swapper/0] [ 3.481256] msm_nand_probe: No nand device found Link to comment Share on other sites More sharing options...
Guest madix-333 Posted May 26, 2017 Report Share Posted May 26, 2017 (edited) Hi Adeii. Dmesg the same cm13 big errors not found, recovery.log need after installation GlazeOS and logcat from system boot. I will try install GlazeOS-v1.0-nonbootable-u8833-20170525.zip in my u8951d. Edited May 26, 2017 by madix-333 Link to comment Share on other sites More sharing options...
Guest adeii Posted May 26, 2017 Report Share Posted May 26, 2017 (edited) On petak, 26. maj 2017. at 9:02 AM, madix-333 said: Hi Adeii. Dmesg the same cm13 big errors not found, recovery.log need after installation GlazeOS and logcat from system boot. I will try install GlazeOS-v1.0-nonbootable-u8833-20170525.zip in my u8951d. update-binary.zip fixed, solved error 4 on twrp 3.1.0.0 https://www.androidfilehost.com/?fid=889764386195902797 recovery log after flashing G.OS https://www.androidfilehost.com/?fid=673368273298958300 dmesg after booting G.OS Edited May 28, 2017 by adeii Link to comment Share on other sites More sharing options...
Guest Abdulhak Posted June 3, 2017 Report Share Posted June 3, 2017 Hi Adeii You can fix this problem with your builds. To install opengapps. here the link: http://www.lineageosrom.com/2017/02/how-to-fix-google-play-services-error.html?m=1 Link to comment Share on other sites More sharing options...
Guest adeii Posted June 8, 2017 Report Share Posted June 8, 2017 (edited) On ponedeljak, 22. maj 2017. at 0:34 PM, degradatoome said: Hi, Adeii! I want to inform you, that y300 can be a bit overclocked to 1095 MHz. Thus you can make overclocked kernels for y300, just set cpu at 1095)) I've trying to higher freq. to 1056 and 1095 MHz in kernel but not bootable. 1046MHz works. Maybe freq.table is wrong. Do you have sourcecode or patch for 1095MHz? Edited June 8, 2017 by adeii Link to comment Share on other sites More sharing options...
Guest adeii Posted June 8, 2017 Report Share Posted June 8, 2017 (edited) https://github.com/Lanchon/haystack <--- patch deodexed ROMs to use microG, without Xposed + FakeGapps, just experiment, not finale. UPDATE: No so recommended, maybe fine for fresh new installed rom. Side-effects are wierd and some apps are no more "legally installed". June build (better say march re-build) for u8833, u8951 and u8951d are uploaded on Mega.NZ, see first and second post! Edited June 9, 2017 by adeii Link to comment Share on other sites More sharing options...
Guest Mr Voland Posted June 8, 2017 Report Share Posted June 8, 2017 6 minutes ago, adeii said: I've trying to higher freq. to 1056 and 1095 MHz in kernel but not bootable. 1046MHz works. Maybe freq.table is wrong. Do you have sourcecode or patch for 1095MHz? I think that reason why is chill360 kernel is set to 1046 MHz Max is because it's highest stable frequency. However those 40 MHz are not special. Link to comment Share on other sites More sharing options...
Guest degradatoome Posted June 16, 2017 Report Share Posted June 16, 2017 On 23.05.2017 at 2:59 PM, adeii said: Chil360 overclocked it to 1048 MHz. Any patch to up 1048 to 1095 or add new freq. on freq.table? Sorry, I was mistaken, frequency was 1045 mhz, however, it is also better than nothing) Adeii, can you try to fix file uploading? It doesnt't work on any ROM with Android 5 or higher( Link to comment Share on other sites More sharing options...
Guest adeii Posted June 26, 2017 Report Share Posted June 26, 2017 I have no new idea about compiling and/or fixing custom roms. * SlimKat 9.1 and newer roms, use SlimLP, Slim6 or CM13 kernel by chil360 - main fault is: uploading file(s) reboot phone(*), FM radio no more working. * Nougat roms are not working for msm7x27a devices, except experimental GlazeOS build for LG L5 (e610). * OpenGapps lags a lot on any MM rom, so microG FW may replace OG, with requirements (like Xposed, FakeGapps, etc), or to patch framework.jar on DEODEXED rom to gain signing spoofing permission. According to this: Signature-Spoofing, some roms already had SS, so I've tried to compile... * OmniRom 6 for Y300/G510 - has working SS, Play Store works with mG, root is gain in hard way(**), BT, FM and Camera do not works... other stuffs seams to work. * crDroid 6 for Y300/G510 - can not find SS in Apps; BT, FM and Camera also do not works... roms seams fast, not much options. ROMs are uploaded on AFH; sourcecodes are GitHub; if anyone wants for experiments with building/repacking.... ----------------- * system apps and adb via wifi can upload files normaly, others reboot phone after few kBytes sent. ** omnirom6 has to be flashed from CWM 6.0.x.x, so recovery have to repair root and after first boot, you have to flash SuperSU-systemmode to gain root. Link to comment Share on other sites More sharing options...
Guest madix-333 Posted June 27, 2017 Report Share Posted June 27, 2017 Hi Adeii, thanks for rom. Glaze not boot, i tried to modify this kernel https://github.com/weritos666/3.4.x_i6/tree/lineageos, d9 kernel to many lag. Why you not enable doze and call record in cm13? Weritos enable doze in cm13 for vee7, this reduce power consumption. Maybe build Carbon rom or Mokee os, this room is much better than lineage. I find this http://zhongzicili.net/cili/7ZV0_xoizx_Zxd2_k2nN-st4ZBm.html qcom sources for msm8625, and Russian Torrent tracker https://rutracker.org/forum/viewtopic.php?t=5131755 maybe this help. Maybe this radio work https://github.com/DNS-S4503-CAF/android_hardware_qcom_fm/tree/cm-13.0 or thishttps://github.com/shakalaca/android_vendor_qcom-opensource_fm. Spirit fm work but no sound, this bag in audio routing. In zip torrent for qcom sources. [rutracker-2.org]_5131755.torrent.zip Link to comment Share on other sites More sharing options...
Guest madix-333 Posted June 27, 2017 Report Share Posted June 27, 2017 In audio_policy.conf AUDIO_DEVICE_OUT not have fm out. Link to comment Share on other sites More sharing options...
Guest madix-333 Posted June 28, 2017 Report Share Posted June 28, 2017 (edited) Adeii see committ in KonstaT cm13 audio_policy: add device out for FM. https://github.com/KonstaT/android_device_zte_kis3/commit/b978445174d9231f69ac3c252db4bf792af1fdd9 https://github.com/OpenDesireProject/android_hardware_qcom_audio-legacy/commit/b06d12438a55ee702dda54af6ce140082386dbcb Edited June 28, 2017 by madix-333 Link to comment Share on other sites More sharing options...
Guest adeii Posted June 30, 2017 Report Share Posted June 30, 2017 (edited) On utorak, 27. jun 2017. at 8:58 AM, madix-333 said: In audio_policy.conf AUDIO_DEVICE_OUT not have fm out. Thanks for all replies, maybe Carbon cr4.0 MM be next one. No more device_out_fm_rx, out_fm_a2dp, in_fm_tx in LP/MM, just out_fm and in_fm_tuner (and _in_tv_tuner). What version of Spirit FM "catches" signal on MM? https://git.sphere.ly/Men_in_black007/android_device_yu_tomato/commit/e321cc9484147bce960f33983ec5c7e10dc62e 11 <-- instead of KonstaT's commit, something is already in device/huawei/msm7x27a-common/audio/ from chil360 UPDATE: crDroid is rebuilt and uploaded, deodexed, with signature spoofing. BT, fm and camera still DO NOT work. but rom already has Settings->Display-> Ambient display doze !!! and new DozeService is added, in background, no gui. And will be add in next (Carbon 4.0 MM) rom, this month :) DozeService.apk, flashable is here! Edited July 2, 2017 by adeii Link to comment Share on other sites More sharing options...
Guest madix-333 Posted June 30, 2017 Report Share Posted June 30, 2017 Hi Adeii. Spirit light 2014_12_04 work, but need set permission 0664 in /dev/radio0. Maybe this error in logcat "bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null" breaks fm Link to comment Share on other sites More sharing options...
Guest madix-333 Posted June 30, 2017 Report Share Posted June 30, 2017 Try this fm, but no sound. package.zip Link to comment Share on other sites More sharing options...
Guest Jack234 Posted July 2, 2017 Report Share Posted July 2, 2017 (edited) I am not able to flash this rom on my Huawei Ascend G510-0200 I am using TWRP 2.7.1.0 for flashing this ROM and i am wiped system, cache, dalvik cache, cust, data before installing and after few seconds i am get error while flashing :( EDIT: I am installed this ROM with CWM Recovery, but i am not able to boot this ROM, any advance? Edited July 2, 2017 by Jack234 Link to comment Share on other sites More sharing options...
Guest adeii Posted July 2, 2017 Report Share Posted July 2, 2017 8 hours ago, Jack234 said: I am not able to flash this rom on my Huawei Ascend G510-0200 I am using TWRP 2.7.1.0 for flashing this ROM and i am wiped system, cache, dalvik cache, cust, data before installing and after few seconds i am get error while flashing :( EDIT: I am installed this ROM with CWM Recovery, but i am not able to boot this ROM, any advance? Well, do you have error cause of wrong device? What is device reply like: "This device is ......". If it that only problem, edit file: META-INF\com\google\android\updater-script , delete first 4-5 lines, so the first line will be "ui_print("Target: Huawei/lineage_u8951d/u8951d:6.0.1/MOB31T/91bb6b5246:userdebug/test-keys");" If not, recovery is old to support MM/6.0 rom, use TWRP 3.x.x by Ceastel or CWM 6.0.4.5 or 6.0.5.0 by dazzozo - they works for sure. Link to comment Share on other sites More sharing options...
Guest adeii Posted July 2, 2017 Report Share Posted July 2, 2017 On petak, 30. jun 2017. at 9:40 AM, madix-333 said: Try this fm, but no sound. package.zip Interesting, good news - it not fails and exit, bad news - it displays "fm is turned off" Link to comment Share on other sites More sharing options...
Guest madix-333 Posted July 2, 2017 Report Share Posted July 2, 2017 Hi Adeii try this. fm2.zip Link to comment Share on other sites More sharing options...
Guest Kiodo1981 Posted July 3, 2017 Report Share Posted July 3, 2017 Is still presente black screen bug? Link to comment Share on other sites More sharing options...
Guest Fernando Negro Posted July 3, 2017 Report Share Posted July 3, 2017 (edited) Can anyone tell me which are the (1) advantages and (2) disadvantages of using this ROM (in comparison with the original one - or ROMs based on the original one) besides the more customizations that CyanogenMod/LineageOS allows one to make? Also, will this LineageOS build automatically update, like the original ROM? Or will I have to manually install a new build, every time one is made? Edited July 3, 2017 by Fernando Negro added another question Link to comment Share on other sites More sharing options...
Guest Jack234 Posted July 4, 2017 Report Share Posted July 4, 2017 On 2.7.2017. at 10:57 PM, adeii said: Well, do you have error cause of wrong device? What is device reply like: "This device is ......". If it that only problem, edit file: META-INF\com\google\android\updater-script , delete first 4-5 lines, so the first line will be "ui_print("Target: Huawei/lineage_u8951d/u8951d:6.0.1/MOB31T/91bb6b5246:userdebug/test-keys");" If not, recovery is old to support MM/6.0 rom, use TWRP 3.x.x by Ceastel or CWM 6.0.4.5 or 6.0.5.0 by dazzozo - they works for sure. I am flashed this ROM via CWM now, but i am not able to boot into LineageOS, what i am do more? :( @Fernando Negro Lollipop and Marshmallow ROMs is not recomeneeded by me for dialy use on our devices (beacuse very fast battery drain than stock based ROMs, long lags with OpenApps etc.), you do not able to get automatically updates on most custom ROMs and if you really want to use this ROM you must use SWAP Memory. My recomeneedation ROM for our devices is CyanogenMod 10.1 by Fonz93 or CyanogenMod 11 by Dazzozo or AOSP B209 (MOD) That is only my mind and sorry for my bad english Link to comment Share on other sites More sharing options...
Guest adeii Posted July 4, 2017 Report Share Posted July 4, 2017 Had you tired chil360ćs cm13 for u8951 ? https://basketbuild.com/filedl/devs?dev=chil360&dl=chil360/u8951/CM13/cm-13.0-20161218-UNOFFICIAL-u8951.zip Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now