Guest serialkillazzs Posted May 21, 2003 Report Posted May 21, 2003 :) Could soyale or someone show us how to use set tones properly with print screen diagrams for using this application. Can this application recognise a number for a ringtone like the beta callface application/s.Is there any way even with phm registery editor to remove the inbuilt microsoft tones in order to free up memory. Also, can someone tell were to get o2 pay and go original, Gprs/WAP/MMS manual Settings (genie free text and wap settings) for SPV, or could someone make a program that can automatically transfer all settings, all UK networks to the SPV handset please !!!!!!!!. :shock:
Guest Dylan Posted June 10, 2003 Report Posted June 10, 2003 HELP!!!!! I had a good go at making this work on my phone yesterday (after several hashed attempts!). I actually managed to make it work (having the UI helped loads!), having sounds for my ringtone and sms. I ran the UI, and eventually it said that both were ok. I rang my phone and the ring tone worked great (tried my 2 faves, intros for can't stop and chop suey! ace!). I couldn't be bothered to ask anyone in work to text me so I assumed that was ok too. On my way home i recieved a text from my girlfriend and, as expected, my phone made the right noise. However, it kept on repeating the noise and wouldn't stop, even once I'd read the message! I pulled the battery and switched it back on. The noise didn't start again but the text had disappeared! Anyway, after it happened a second and then third time i decided to delete the SMS file which links to the noise and change my SMS tone to another sound. This didn't stop the problem, again the tone kept repeating until i pulled the battery. I've fixed this in the short term by having no sound when a text arrives but i've got to do something about this!!! Can anyone help me??? Soyale, any advice???
Guest Soyale Posted June 11, 2003 Report Posted June 11, 2003 Hi Can you send me the SMS file you were trying to use and possibly the tone file too (try zipping it up)? Send it to the address in the release notes. I'm in the process of moving house/job so I probably won't be able to do anything with it for a few days but I promise I'll look at it! jp
Guest Dylan Posted June 11, 2003 Report Posted June 11, 2003 Awesome, I've just sent the relevant files all zipped up. Thanks SOOOOO much for having a look at this.
Guest cthulhu Posted July 2, 2003 Report Posted July 2, 2003 Been using Settones successfully for ages now, but over the last few days after boot-up I'm getting 'Sound Not Found' for both Ringtone0 and SMS. If I go to the StartUp folder and run the link, the Sounds are loaded OK. Anybody else seen this problem ?
Guest Soyale Posted July 2, 2003 Report Posted July 2, 2003 That's a funny one. I thought version 4 didn't display anything when it booted up. That suggests that the shortcut in your startup folder isn't right. Although it's a poor offering of a solution I'd suggest uninstalling then making sure that there are no shortcuts or copies of the .exe and then reinstalling. Let me know if that helps.
Guest cthulhu Posted July 2, 2003 Report Posted July 2, 2003 Hi Soyale, thanks for the info. I thought the status display was one of the new features. (Well I like it!) I deinstalled SetTones, deleted the shortcut from IPSMWindowsStartup. Reinstalled (the CAB had no version number but it was the one that had been working fine previously) successfully. Then I took a copy of the exe from Accessories and used it to create a shortcut again in Startup On boot up the 'Finished' window appeared with '2 tones failed' message, but manually running the shortcut gives me the correct '2 tones updated'. I'm wondering if I'm the only one running SetTones on Bootup?!
Guest Soyale Posted July 3, 2003 Report Posted July 3, 2003 The latest version should create all the necessary shortcuts for you (and in fact creates on which uses a flag to make it slient on bootup). I'd download again to be sure but otherwise send me your files and your .wavs and I'll try them out at my end to see if I can repro your problem. Be aware. I've just started a new job and I'm absolutely slammed at the moment (as Dylan will tell you, still planning to look at your problem dude). In other words, it might take a while.
Guest cthulhu Posted July 3, 2003 Report Posted July 3, 2003 Cheers, but I don't really think the software is at fault here. On booting up this morning it worked perfectly, so I'm wondering if it could be due to some delay or timing oddity in the bootup. Is it possible that SetTones could sometime be activated (via my shortcut)before the registry is initialised!?
Guest Soyale Posted July 3, 2003 Report Posted July 3, 2003 I had sometimes observed the behaviour that it didn't seem to update properly. I'll take a look over the weekend and see if there's anything I can do to rectify the situation.
Guest oipa Posted July 9, 2003 Report Posted July 9, 2003 Hi, trying to make SetTones work : installation is ok, Storage CardSounds....mid,apr is ok running SetTones reports: Ringtone0 : OK 1 tones updated but - the ringtone (on my phone reffered to as "line 1 and ine 2" is (re)set to the first-in-line (i.e. "Alarm1") when SetTones is run, regardless of my previous choice... What am I doing wrong... Regards Ola
Guest Soyale Posted July 10, 2003 Report Posted July 10, 2003 Nothing. The inbuilt application can't display these "hacked in" ringtones so it just shows the default. If you run SetTones and just ring your phone you should find out that the tone has been set properly. BTW Had a catastrophic VSS failure at the weekend and lost some of the work I'd been doing. Didn't have the heart to do it again right away. Having a mentally busy week again, who knows, I may get time at the weekend to do an update. jp
Guest jonix111 Posted July 31, 2003 Report Posted July 31, 2003 Hi guys, Just would like to ask...have you encountered failure for setting SMS? Ringtone0 worked fine, when I did the same for SMS it doesn't. Further, the text file kept on adding "v" to the end of wav extension (i.e., song.wavv). Tried editing a couple of times, the v just kep coming back. What could have I done wrong? Here's the text for my SMS... Storage CardAudiosong.wav BTW, is this page still up? -->http://www.way2access.net/midnight/?page=tweaks#sounds can't get to it. To Soyale...thanks a million for the app.
Guest cthulhu Posted August 7, 2003 Report Posted August 7, 2003 I'd suggest putting a script after the .wav name like this.... Storage CardAudiosong.wav,ap For ringtones I use ,ap3r to give me a 3 sec pause and repeat, or just ,apr if I don't want the pause. I seem to remember the phone going potty when I put a repeat on an sms sound - couldn't stop it playing for some reason.
Guest magkono Posted August 16, 2003 Report Posted August 16, 2003 hi guys. how do you set the tone so it can read the tone in the SD. thanks
Guest evans-l Posted August 17, 2003 Report Posted August 17, 2003 Posted from my SmartPhone! It sounds great ! however i don't have as much access to a pc as i'd like. Any chance of posting a link where we can download it straight to the spv ? PS. as for the repeating sms notification sound, you are right. An 'r' in the script will repeat forever. The way I fixed it was to regedit the script back to 'ap' You wouldn't believe the trouble i had after putting a 'r' in the keypad script !
Guest MoRFLeZ Posted August 17, 2003 Report Posted August 17, 2003 Try this addy: http://www.4smartphone.dk/mobile Then click "Programmer" .. and it will list a bunch of programs .. including Settones. Granted it's not the best way for a download section on the SPV, but it works...
Guest ICY Posted August 20, 2003 Report Posted August 20, 2003 i keep trying to change the SystemStart tone but after every reboot the tone just gets wiped, is where i am going wrong because the startup only plays midi files because i havent yet tried that (only tried wav) help plz..
Guest dotdot Posted August 25, 2003 Report Posted August 25, 2003 8) to smartphone experts, i just want to ask, do i need to dicertify my phone in order make this SOYALE to work??? also if i copy the ringtone0 from the zip file that i have downloaded do i need to edit what inside that files. or do i have to cre8 my own ringtone0, what software or where should i cre8 it notepad or word? tnx.....
Guest Myke Posted August 25, 2003 Report Posted August 25, 2003 the new QTEK 1.5 rom reads ringtones from the SD without 3rd party software, YAY!!!
Guest Monolithix [MVP] Posted August 25, 2003 Report Posted August 25, 2003 Yep, Orange 1.6 does too :)
Guest nixy Posted August 29, 2003 Report Posted August 29, 2003 For anyone having problems with setting up ringtones on storage card -------------------------------------------------------------------------------- Changer Sonneries "v2" is now available from below link. It allows you to keep all your ringtones on your storage card. All tones can be set to card. SMS, Alarm, Line1, Line2, Warning tone........ Goto the www.4smartphone.dk for the download and instructions
Guest jamesh Posted September 23, 2003 Report Posted September 23, 2003 Where can I download the new Qtek 1.5 rom?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now