Guest Uchiha_1123 Posted December 25, 2015 Report Posted December 25, 2015 On 11/25/2015 at 9:42 AM, kshreshth said: this is showing while i try to install stock rom..... HELP ME!!!!!!!!!! where i am wrong? same issue
Guest Uchiha_1123 Posted December 26, 2015 Report Posted December 26, 2015 (edited) so, finally managed to get YGDP to flash the ROM, is there a way I can only flash certain parts of the ROM rather than the whole ROM like SP Flash Tool ? Like only flash recovery, logo.img Edited December 26, 2015 by Uchiha_1123
Guest Uchiha_1123 Posted December 26, 2015 Report Posted December 26, 2015 On 10/2/2014 at 5:29 PM, krish_nank said: Bro but i am hardcore fan of MIUI and tried Coolpad rom i lost IMEI could not restore it.... same here, please help
Guest korekore1 Posted December 29, 2015 Report Posted December 29, 2015 so, finally managed to get YGDP to flash the ROM, is there a way I can only flash certain parts of the ROM rather than the whole ROM like SP Flash Tool ? Like only flash recovery, logo.img you can try deleting the folders you dont need from the folder ygdp unpacks the cpb in your harddrive before it goes on with the installation.maybe it will flash only the files remaining,maybe it will fail,just try and see! But:if your previous rom was not tha same with the cpb you are flashing,you may have conflicts. Also:ygdp maybe formats the previous rom BEFORE installation.Thats very probable.Then maybe you will end up with a brick.Be careful!
Guest wiowia Posted January 4, 2016 Report Posted January 4, 2016 (edited) I cannot unbrick my phone with any tools.. In flash tool even if it procceed till the end,it cannot boot..When i go to recovery it's still at CWM 6.0.5.. With YGDP it stops at 98%.. 00:56:47 CELL0: Software Version: Assembly - <V3.98_141222_02> 00:56:47 CELL0: Cell 0 USB address is: com8 00:56:47 CELL0: Start Download. 00:56:47 CELL0: Download Started... 00:56:47 CELL0: Downloading CPB: 00:56:47 CELL0: Init Connect Arg. 00:56:47 CELL0: Downlaod DA Start. 00:56:50 CELL0: Downlaod DA Success. 00:56:50 CELL0: Verify is Partition be Changed. 00:56:50 CELL0: Get Usb Status Success. 00:56:50 CELL0: Read YL-Parames Partition Start. 00:56:52 CELL0: Read YL-Parames Partition Success. 00:56:52 CELL0: Check between YL-Parames Partition and PhoneInfo Start. 00:56:52 CELL0: Check between YL-Parames Partition and PhoneInfo Success. 00:56:52 CELL0: Init BackUp Table. 00:56:52 CELL0: Read BackUp File Start. 00:57:42 CELL0: Read BackUp File Success. 00:57:42 CELL0: Mach Storage Type is Successful. 00:57:42 CELL0: startAddr 5f000000, format length 171b00000 00:57:45 CELL0: Format Device Success. 00:57:45 CELL0: Start Download CPB. 00:59:55 CELL0: Download CPB Failed. 00:59:55 CELL0: ERROR:1041 00:59:55 CELL0: DisConnect. 01:00:15 CELL0: Total download time elapsed: 3 min : 28 sec 01:00:15 CELL0: Downloading CPB: Failed! This is how it is recognised at USBDeview: MT65xx Preloader MediaTek PreLoader USB VCOM Port When i get in recovery mode it writes the followings: E:Can't mount/cache/recovery/command E:Can't mount/cache/recovery/log E:Can't open/cache/recovery/log E:Can't mount/cache/recovery/last_log E:Can't open/cache/recovery/last_log E:Can't mount/cache/recovery/last_install E:Can't open/cache/recovery/last_install Any help on what may be wrong?? edit I've tried this 2 rom posted by mixanikos: http://download.yulong.com...0828856(2).rar http://download.yulong.com...0844349(3).rar Edited January 4, 2016 by wiowia
Guest mixanikosgr Posted January 5, 2016 Report Posted January 5, 2016 13 hours ago, wiowia said: I cannot unbrick my phone with any tools.. In flash tool even if it procceed till the end,it cannot boot..When i go to recovery it's still at CWM 6.0.5.. With YGDP it stops at 98%.. 00:59:55 CELL0: Download CPB Failed. 00:59:55 CELL0: ERROR:1041 00:59:55 CELL0: DisConnect. 01:00:15 CELL0: Total download time elapsed: 3 min : 28 sec 01:00:15 CELL0: Downloading CPB: Failed! This is how it is recognised at USBDeview: MT65xx Preloader MediaTek PreLoader USB VCOM Port When i get in recovery mode it writes the followings: E:Can't mount/cache/recovery/command E:Can't mount/cache/recovery/log E:Can't open/cache/recovery/log E:Can't mount/cache/recovery/last_log E:Can't open/cache/recovery/last_log E:Can't mount/cache/recovery/last_install E:Can't open/cache/recovery/last_install Any help on what may be wrong?? edit I've tried this 2 rom posted by mixanikos: http://download.yulong.com...0828856(2).rar http://download.yulong.com...0844349(3).rar Which was your previous rom? In spflash tools did you click format all + download ? Can you flash the zip from your previous rom with cwm 6.0.5.0 ? For unbrick use the first official 4.2 rom from here: https://drive.google.com/folderview?id=0B4huyVgvdssGMXFTRFJ0QmNoUGc&usp=sharing#list https://drive.google.com/folderview?id=0B4huyVgvdssGMUNQNElsQ2VaMHM&usp=sharing#list I would also suggest to try the older version of YGDP tools, so you can select the model 8297W I read "giorgos" in the screenshot. Are you Greek?
Guest wiowia Posted January 5, 2016 Report Posted January 5, 2016 Yes my friend,i am Greek.. I've sent you a PM.. Thanks a lot
Guest Jpower73 Posted January 5, 2016 Report Posted January 5, 2016 (edited) In spFlash tool, check everything EXCEPT PRELOADER. press the download button. That’s all Edited January 5, 2016 by Jpower73
Guest wiowia Posted January 5, 2016 Report Posted January 5, 2016 2 hours ago, Jpower73 said: In spFlash tool, check everything EXCEPT PRELOADER. press the download button. That’s all I did that too but it didn't work although it completes the task..
Guest Jpower73 Posted January 5, 2016 Report Posted January 5, 2016 (edited) Do the same operation but this time, do it keeping both volume up +down buttons pressed If Ok. Unplug it. Take off/on battery for few seconds. Boot. Edited January 5, 2016 by Jpower73
Guest wiowia Posted January 5, 2016 Report Posted January 5, 2016 (edited) 5 hours ago, Jpower73 said: Do the same operation but this time, do it keeping both volume up +down buttons pressed If Ok. Unplug it. Take off/on battery for few seconds. Boot. Nope...It's the same.. If it isn't the drivers then i suppose that it is done.. Edited January 5, 2016 by wiowia
Guest NunoCruz Posted February 4, 2016 Report Posted February 4, 2016 Hi, any one know where I can get a stock rom for coolpad 8860U also know as vodafone smart 4g?
Guest dalyer Posted February 4, 2016 Report Posted February 4, 2016 (edited) 1 hour ago, NunoCruz said: Hi, any one know where I can get a stock rom for coolpad 8860U also know as vodafone smart 4g? Any use? Use Google/Chrome translate. https://www.androidpt.com/topic/57647-tutorial-vodafone-smart-4-turbo-kitkat/ Edit: oh - scratch that - wrong model I think. I got that link here in case it helps at all: https://www.androidpt.com/topic/58150-vodafone-smart-4g-coolpad-8860u-ota-updates-servidor-testes-yulongcoolpad/ Edited February 4, 2016 by dalyer
Guest Rizky Maulana Posted March 15, 2016 Report Posted March 15, 2016 Sorry what is model for Coolpad e501? Please help me :) its 8297? I dont know about it
Guest dalyer Posted March 15, 2016 Report Posted March 15, 2016 Definitely not 8297 anyway. e501 is a Qualcomm MSM8916 Snapdragon 410 http://www.gsmarena.com/coolpad_modena-7551.php 8297 is a MediaTek MT6952 http://www.devicespecifications.com/en/model/630a2b5c Totally different SoCs.
Guest Butombo Posted June 22, 2016 Report Posted June 22, 2016 Hello guys can you help me send firmware of coolpad 8297w in CBP format to my google drive, [email protected] . i cant download in Baidu, PLEASE HELP HELP PLZ
Guest rista1 Posted June 24, 2016 Report Posted June 24, 2016 https://drive.google.com/file/d/0B21y7GJ5u_6cX1M5aDJrNG9wUFU/view?usp=drivesdk
Guest Dheeraj R Posted July 14, 2016 Report Posted July 14, 2016 (edited) can you upload the .cpm file somewhere? can't find any other way to download from baidu :/ can't register with my number, says invalid :/ my device is Coolpad Note 3 8676-I02 MT6753, I did flashing using SP tool using this firmware file https://drive.google.com/file/d/0B66ezAqMul7QUzZFWlNBdVA2Y0E/view the phone IMEI is unknown and I tried the using imei.exe command but now the IMEI is showing differently(see photo)! Serial number is also different in the phone and different in the box :/ please help me get out of this! Edited July 14, 2016 by Dheeraj R serial number issue
Guest SCAZENITH Posted July 24, 2016 Report Posted July 24, 2016 I can't seem to manually install the SP drivers, no matter what I do, as a result the phone is not recognized. Any idea what may have gone wrong here ?
Guest brchina Posted August 1, 2016 Report Posted August 1, 2016 (edited) Hello. I'm cought up in a terrible loop and I hope someone can help. I have a Coolpad Modena E501 it was on lollipop. I rooted it with kingroot and wanted to instal twrp with Rashr. It asked me to reboot to recovery i pressed yes, the phone turned off and screen popped up to press volume up to proceed or vol down to cancel, however the buttons are not responding. I tried connecting it to pc and pressing vol up then I get a message "Information, do not unplug cable from your computer." and that's it it's stuck on that. I downloaded stock rom and tried with ygdp tool to flash it but I can't find the assembly number of my phone. I also tried with newer version but i get code 0 downloading failed. Any suggestions? I'd really appreciate it, thank you very much. Edit: I can't take the battery out because it's built in. I installed drivers that came with stock rom zip but I pressume that pc is not recognizing it. When it's plugged to pc with information message, pc recognizes it like "android coolpad bootloader". Something like that, if you guys need screenshots or dump files let me know. Edited August 1, 2016 by brchina
Guest nsmacd1 Posted August 28, 2016 Report Posted August 28, 2016 (edited) Can anyone help - I am also stuck on the 98% failure for the Coolpad F1? I have tried 4 different versions of YGDP and 2 versions of the CPB files (4.4.035 & 4.4.046). Some of the versions will work and others are just getting hung at the 'Entering Download' stage - I have also disabled anti-virus on the PC when attempting these) I was running the (rooted) ROM AOSP-Nitro-A310-V3-Repack with CWM installed (This is no longer loading after various re-flashing attempts to un-brick the phone) and had the could not mount \cache error. Is there a site to download any later CPB files, as I was not able to from the the Baidu site, or anything else I can try, as I can only get as far as the Google boot logo? I have also tried SP Flash Tools and can get as far as the Download DA red bar loading, and then get the error 'BROM Error : S_BROM_CMD_JUMP_DA_FAIL (0x7F3)' Thanks in advance! EDIT - Log files attached, but the main errors are: 20:51:51 CELL0: Fail to transmit boot.img file Flag code 20:51:51 CELL0: Res: Checksum Error. 20:51:51 CELL0: Download failed,please try again!! 20:51:51 CELL0: Total download time elapsed: 4 min : 21 sec 20:51:51 CELL0: Downloading all files: Failed! 8297W_FAILED_CELL0_20.51.51.rtf Edited August 28, 2016 by nsmacd1
Guest rista1 Posted September 1, 2016 Report Posted September 1, 2016 https://drive.google.com/file/d/0B21y7GJ5u_6cX1M5aDJrNG9wUFU/view?usp=drivesdk https://drive.google.com/file/d/0B21y7GJ5u_6ceDNNYnBldlhRNHc/view?usp=drivesdk pass 369
Guest nsmacd1 Posted September 2, 2016 Report Posted September 2, 2016 (edited) 5 hours ago, rista1 said: Still failing at 98% unfortunately with this & other versions of the YGDP tool, but thanks anyway! https://drive.google.com/file/d/0B21y7GJ5u_6cX1M5aDJrNG9wUFU/view?usp=drivesdk https://drive.google.com/file/d/0B21y7GJ5u_6ceDNNYnBldlhRNHc/view?usp=drivesdk pass 369 Edited September 2, 2016 by nsmacd1
Guest dakok Posted September 2, 2016 Report Posted September 2, 2016 Guys, why don't you use official CDA Tool (Coolpad Download Assistant)? http://bbs.coolpad.com/thread-4185136-1-1.html
Guest nsmacd1 Posted September 2, 2016 Report Posted September 2, 2016 (edited) Hi Dakok. Thanks for the tip, but I tried the CDA tool first (Version V1.89_141231), but could not get it to go which is why I am trying the YGDP tool. I tried CDA again with CPB file 4.4.046.P0.150720.8297W.CPB and this too fails at 98% with the error screen attached, if you have any idea what this says? :-) The phone display says Writing Flash.....' followed by 'Checksum error' What do you reckon - Wrong CPB file, or phone is fried? I have also tried with these CPB files, all with the same result: (The label behind the battery says Coolpad 8297 W, so I guess I have the correct CPB files). 4.2.020.P0.140409.8297W.CPB 4.4.035.P0.150323.8297W.CPB 4.4.046.P0.150720.8297W.CPB I also tried with/without memory card and battery installed and with anti-virus turned off, if you have any other ideas? Thanks again! Edited September 2, 2016 by nsmacd1
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now